Collection: Best Selling Products

A life-saving buoy for small vessels.

[Product specifications]
■Type approval number No. 4564
■Size: Outer diameter 390 x inner diameter 145 x thickness 80mm
●Lifeline: 15m
●Buoyancy: 9.3kg

●Type approved product
-Size: 50 x 400mm, set of 2

●Ministry of Land, Infrastructure, Transport and Tourism type approved product
-Size: 50 x 100mm, set of 2

●Stickers to clearly identify where life jackets are stored.
*It is required to be affixed to ships according to Article 61, Paragraph 2 of the Small Boat Safety Regulations.

●The surface has been treated with a waterproof coating.

●Contents: 1 piece

●Size: Width 18 x Height 13cm

●It is a balloon type black ball that can be folded into a small size.
●It must be displayed when the anchor is lowered and moored.
●Small Ship Organization certified product (JCI certified product)

【size】
■Quantity: 2 pieces 1 set
■Diameter: Ф310mm

●It must be displayed when the anchor is lowered and moored.

●Small Ship Organization certified product (JCI certified product)
●Made of plastic plate
●Contents: 1 piece

【size】
Diameter: Ф310mm

●Genuine KNOCKE SENSOR SEA-DOO ♯420664031

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

[Compatibility] GTR230 ('20-) / GTI130 ('20-)

●Convenient for storing small items in the large capacity storage of GTI hull models from 2020 onwards.

●A highly practical item that is easy to carry even when taken off the ship.

●Upgrade hardware kit essential for using LinQ bag TUNNEL BAG (product number: 860201740) in seawater.

●LinQ hardware kit includes highly corrosion-resistant stainless steel parts

●Easy and quick installation

*Standard equipment for LinQ Cooler cooler box

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

●Convenient for storing small items in the large capacity storage of the ST3 hull model.

●Breathable front storage bin storage bag made of high quality synthetic mesh fabric.

●Equipped with carry handle.

●A highly practical item that is easy to carry even when taken off the ship.

●Quick installation fasteners securely hold bags in storage bins.

●Even more convenient when combined with Storage Bin Organizer (295100733).

[Compatibility] RXT, RXT-X, GTX and WAKE Pro (2018)

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Please use it for FISH PRO / GTX models without audio after 2018 or when the audio is broken.

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
●SEA-DOO iBR model before 2017 model (*Not required for SPARK)

●Genuine SEA-DOO fender that is ready to be attached and detached

●Fluorescent orange body with excellent visibility

●2 pieces/set

●When using this snap-in fender, a special installation kit must be installed on the hull in advance. (*Not required for SPARK.)

※※ Sold separately ※※
[Compatibility]
●SEA-DOO iBR model before 2017 model
Requires Snap-In Fenders Installation Kit (Part number: 295100550)

●RXT, RXT-X, GTX and WAKE Pro (2018)
Requires Snap-In Fenders Installation Kit (Part number: 295100729)

●Genuine ANODE ZINC SEA-DOO ♯271001813

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●Type approval number No. 745
-Can be installed on flat water vessels
●Surface is polyester vinyl chloride waterproof cloth (flame retardant)
●The buoyant body is made of closed polyethylene foam. Normally you can put it on a cushion, but in an emergency, grab it with both hands and jump in.
■Buoyancy: 9.3kg
■Size: 400×400×60mm

●Press the start switch for 2 to 4 seconds to automatically start suction and drainage, and when drainage is complete, the motor will automatically stop, so there is no need to worry about dry running.

●Voltage: 24V

●It is a fire extinguishing bucket that can be folded compactly as it is made of cloth.

●Required during ship inspection.

●It can quickly draw water in an emergency and can be stored compactly, so it does not take up much space.

●JCI standard compliant product No. 17

【 body size 】
■Diameter: Approximately 230mm
■Height: Approx. 265mm

With 3m polyethylene rope

●A manual powder fire extinguisher for small vessels. Be sure to be equipped in case of a fire inside the ship.
●Equipped with a highly visible yellow ring-type safety plug.
Even if you hold the lever, you can easily release it and start extinguishing the fire immediately.

- Comes with a "good mark" that comes off as soon as you squeeze the lever when in use.
Fire extinguishers that have the "Good Mark" and horn "seal" removed are used and should be refilled immediately.
●Easy to use! It is extremely effective against all kinds of fires.

【Product Specifications】
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
■Model: CSP-3X
■Standard: Ministry of Land, Infrastructure, Transport and Tourism certified product
■Type approval number No. 4762
■Total weight: 2.2kg
■Height 380mm x Width 205mm x Depth 89mm
■Drug amount 1.0kg
■Applicable fires Ordinary, oil, and electrical fires
■Radiation time (20℃) 12 seconds
■Radiation distance (20℃) 3~5m
■Operating temperature range -20℃～+40℃
■Anti-rust/corrosion treatment Red/synthetic resin paint baking coating
■Hose 300mm
■Pressure test pressure value 1.2MPa

*Includes recycling fee.

[Product specifications]
■Type: Pipe mounting type
■Material: Plastic
■Size: Total length 295mm
■Holder inner diameter: 43φ
■Pipe diameter that can be installed: 19 to 25φ (mm)
...
■Can be fixed at any 360 degree angle

●Movable type with 360° angle adjustment
●Reasonable rod holder for pipe installation made of resin.
●By fixing the bracket to the pipe and tightening the bolt that fixes the rod holder and bracket at any position.
Fix the rod holder at the most convenient angle.

[Compatible models] SEADOO
GTR (12-19)
GTI (11-19)

Control in cornering and rough conditions will be dramatically improved.

[About installation]
Can be installed by bolt-on to the genuine hole

[Applicable model] SEADOO S3 hull
GTX('10-'17)
iS255
iS260

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models] SEA-DOO
RXT-X 300('18-'21)
GTX LIMITED 300('18-'21)
WAKE PRO 230('18-'21)
GTX230('21)

By avoiding the resonator after the water box and exhausting to the rear,
Improve engine performance.

[Compatible models] SEA-DOO
RXT-X260/iS/aS
RXT-X260RS/GTX (S3 hull ALL)

*For models with suspension function, please use [RS15090-RSB] together.

Exhaust air can flow better and performance will improve.

[Compatibility] Can be installed on runabout models [Type] Handle diameter 22.4mm standard [Included] Handlebar pad included (pad length: 220mm)

●Wide handlebars allow for natural and aggressive riding.

●The wide handle makes it easy to adjust (cut) the handle to your desired length.

●The racing handlebar is made from aircraft materials and coated with carbon fiber, giving it a spartan and stylish look.

●The angle and length are based on the conventional racing bar, but there is a printed scale that allows you to reliably set the mount position, making it convenient for setting.

●The straight type is the world's first innovative handlebar exclusively for watercraft, with no SWEEP handle squeezed at all. Used and recommended by top riders around the world. The feature is that when the center of gravity is low, there is no interference between the steering wheel and the flank when cornering, allowing you to maintain a more forward-leaning posture.

■A triple rod holder for wall mounting.

■Equipped with holes for convenient storage and organization of knives, pliers, fishing tackle, etc.

■By using UV-resistant polypropylene as the material, there is less deterioration due to ultraviolet rays and excellent weather resistance.

■Size: Height 305 x Width 320 x Depth 65mm

■Holder inner diameter: 45φ

■Assembly type

■Mounting screws included

[Applicable model] SEADOO GTX-L300 (18 years model -)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates.
4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] SEADOO
RXT-X300 (18 years onwards)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates. 4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] Yamaha
FZR/FZS (up to 2013 model)

This dramatically improves control when cornering and going over rough terrain.
It can be installed by bolting onto the original holes.

[Compatible models] YAMAHA
GP1800('15-)
VXR('15-)
VXS('15-)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models] SEADOO RXP-X300/260 ('12-)

This provides dramatically improved control when cornering and in rough conditions.

[Installation] Bolt-on installation possible with genuine holes

[Compatible models] YAMAHA
GP1300R (from 2005 model year)

Control in cornering and rough conditions will be dramatically improved.

[About installation] Can be installed by bolting on to the genuine hole.

[Compatible models] YAMAHA
FX140
FX160
FX HO
VX110

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

Lexus NX

[Compatible models] AYZ10,15 (hybrid)/AGZ10,15 (turbo vehicle)

*For turbo cars, F Sport is also available.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

[Traction power] C
[Ball mount] B-8
[Installation difficulty] ★☆☆☆☆

For turbo cars, F Sport is also OK.

[Half stainless steel/combi hitch (CHC)]
The main bar is made of steel
Accessories (ball mount, hitch ball, detachable pin) are made of stainless steel.

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap ■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-60S small hook 6.0m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

LX570 Late Modellista LEXUS
Specifications after minor change from August 2017

Towing capacity: C (750kg or less)
Mount: Slant hitch Ball: Short ball

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.