Collection: Best Selling Products

[Compatible models]
KAWASAKI Kawasaki
800SX-R(03-)
800X-2

■Plate length: 490mm

It has a wavy design for racing.
The feature of Works Dominator plate is the original D cut hole.
It attracts the hull and water surface, giving you a reliable grip in any water surface condition.
Designed to be longer than the genuine ride plate, it also improves straight-line stability.

"Create a beautiful body line"
This wetsuit for women features an elegant lace pattern.
The cute design goes well with swimsuits.

[Two-piece suit consisting of a wetsuit jacket and long pants]
The three-dimensional act structure and loose silhouette allow for aggressive movements and minimize strain even when worn for long periods of time.
It is sewn with flat seams so that the seams are not noticeable, and the material is Super Light Foam, which is lightweight and highly elastic.
The ankles come standard with zippers for easy on and off.
The waist part can be folded over for a low rise look, making it a two-way design.

The sides of the jacket are made of airplane material, which is highly breathable and water-repellent.
■MATERIAL 2mm neoprene ■Suitable size
MB: Height 158-162cm Chest 82-86cm Waist 64-68cm Hips 91-95cm
LB: Height 162-166cm Chest 84-88cm Waist 66-70cm Hips 93-97cm

Personal Watercraft (PWC) Jet Ski, SUP
Jet ski, Marine jet, Surfing, Marine sports, Snorkeling

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

[Compatible models]
KAWASAKI Kawasaki 440/550

Straight-line stability at high speeds is significantly improved.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

[Compatible models]
YAMAHA FZR FZS

●Mirroless camera for a stylish and lacy look.

[Compatible models]
YAMAHA FZS/FZR (~13 years)

●Improvement of top speed Improved handling performance.

[Compatible models] YAMAHA SJ (08-20)
Improves top speed and handling performance.

outlander

[Compatible model] GG3W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outlander

[Compatible model] GG3W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outlander

[Compatible model] GG3W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG

[Compatible model] 3DA-CV1W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-6
[Installation difficulty]☆
*Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG

[Compatible model] 3DA-CV1W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-6
[Installation difficulty]☆
*Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG

[Compatible model] 3DA-CV1W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-6
[Installation difficulty]☆
*Rodest NG 2019.2 or later (new model) Urban Gear (large bumper) NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outlander

[Compatible model] DLA-GG2W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outlander

[Compatible model] DLA-GG2W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outlander

[Compatible model] DLA-GG2W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with license plate embedded in bumper NG (H20.9~?)

[Compatible model] ABA-H58A

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Duke not allowed, type with license plate embedded in bumper NG (H20.9~?)
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with license plate embedded in bumper NG (H20.9~?)

[Compatible model] ABA-H58A

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Duke not allowed, type with license plate embedded in bumper NG (H20.9~?)
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with license plate embedded in bumper NG (H20.9~?)

[Compatible model] ABA-H58A

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Duke not allowed, type with license plate embedded in bumper NG (H20.9~?)
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Lodest NG

[Compatible models] CV5W, CV1W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Roadest NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Lodest NG

[Compatible models] CV5W, CV1W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Roadest NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica D5 *Lodest NG

[Compatible models] CV5W, CV1W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Roadest NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero *Removal of rear cross member with tow hook

[Compatible models] V97W/V93W/V98W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Removal of rear cross member with tow hook
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero *Removal of rear cross member with tow hook

[Compatible models] V97W/V93W/V98W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Removal of rear cross member with tow hook
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero *Removal of rear cross member with tow hook

[Compatible models] V97W/V93W/V98W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty]☆
Removal of rear cross member with tow hook
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Triton *Rear guard bar removal

[Compatible model] KB9T

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Rear guard bar removal
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Triton *Rear guard bar removal

[Compatible model] KB9T

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Rear guard bar removal
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Outlander *Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, a transistor relay may be required depending on the car.

[Compatible model] CW5W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-9
[Installation difficulty]☆
*Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, and depending on the car, a transistor relay may be required.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Outlander *Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, a transistor relay may be required depending on the car.

[Compatible model] CW5W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-9
[Installation difficulty]☆
*Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, and depending on the car, a transistor relay may be required.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Outlander *Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, a transistor relay may be required depending on the car.

[Compatible model] CW5W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-9
[Installation difficulty]☆
*Rodest NG, the rear lower gate cannot be opened or closed without removing the ball mount, and depending on the car, a transistor relay may be required.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

pajero

[Compatible models] V75W/V78W/V73W/V65W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

pajero

[Compatible models] V75W/V78W/V73W/V65W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

pajero

[Compatible models] V75W/V78W/V73W/V65W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Regnum *H10.8~

[Compatible models] EA3W/5W EC1W EC3W, etc.

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆
Drilling required H10.8~
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with lamp on bumper NG

[Compatible model] H53A/H58A

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
Duke not allowed, type with lamp on bumper NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with lamp on bumper NG

[Compatible model] H53A/H58A

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
Duke not allowed, type with lamp on bumper NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with lamp on bumper NG

[Compatible model] H53A/H58A

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
Duke not allowed, type with lamp on bumper NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Io *turbo car not available

[Compatible model] H76W/H77W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Turbo cars not allowed
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Io *turbo car not available

[Compatible model] H76W/H77W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Turbo cars not allowed
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Io *turbo car not available

[Compatible model] H76W/H77W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Turbo cars not allowed
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Space Gear *Gasoline vehicles (PD/PE/PW6W, etc.) are not allowed

[Compatible models] PD/PE/PF8W, PA/PE4W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
Drilling required No gasoline vehicles (PD/PE/PW6W, etc.)
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Space Gear *Gasoline vehicles (PD/PE/PW6W, etc.) are not allowed

[Compatible models] PD/PE/PF8W, PA/PE4W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
Drilling required No gasoline vehicles (PD/PE/PW6W, etc.)
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Space Gear *Gasoline vehicles (PD/PE/PW6W, etc.) are not allowed

[Compatible models] PD/PE/PF8W, PA/PE4W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
Drilling required No gasoline vehicles (PD/PE/PW6W, etc.)
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Chariot / RVR

[Compatible models] N23WG/28WG/N43W/N21W/N33W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction force] C
[Ball mount] Dedicated ball mount
[Installation difficulty]☆
Hole required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Star Wagon *Requires rear stabilizer confirmation

[Compatible model] P25W/P35W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Requires rear stabilizer confirmation
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Star Wagon *Requires rear stabilizer confirmation

[Compatible model] P25W/P35W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Requires rear stabilizer confirmation
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Delica Star Wagon *Requires rear stabilizer confirmation

[Compatible model] P25W/P35W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty]☆
Requires rear stabilizer confirmation
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Benz M class ML430 ML320

[Compatible model] 163154

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] C
[Ball mount] B-5
[Installation difficulty]☆
Difficult to remove spare tire after installation
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.