Collection: bestseller

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
The Jet Renew series features a gorgeous fragrance that is typical of American-made detergents. You can enjoy a variety of scents for each product. We also recommend that you enjoy the various series of products that suit your needs.

Pink Plus is a 2-in-1 wax and limescale remover.
It has the same effect as the wax PINK (QUICK & SHINE) from the same series, and is blended with RED (WATERSPOT REMOVER).
Achieves a glossy finish while removing surface dirt.

[Contents] 473ml
[How to use] Spray directly to remove limescale stains, then polish with a soft cloth in a circular motion. Use twice on areas with severe water stains. After use, please wash this product thoroughly with shampoo.
For shampoo, we recommend PURPLE Wash and Wax from the JETRENU series.
*Do not use on aluminum or alumite processed products. It will damage the surface paint.
*Do not leave it unattended with it applied to the surface.
*Please be sure to test on an inconspicuous area before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

UNLIMITEDレースパラソルは、機能性とデザイン性を両立させたパラソルです。
耐久性と耐風性に優れたフレームと幅広のキャノピーを備え、強い日差しの中でもきっと役に立ちます。
ワンタッチで開けられるのでとっても便利。
レースピット、マリーナ、ビーチサイドなど、どんな場所でも快適に過ごせます。

■素材：ポリエステル、グラスファイバーシャフト
■直径：127cm、50インチ
■ハンドル：EVA

▶UNLIMITED 2026 COLLECTIONはこちら

レーシングパラソル スポーツパラソル 日傘 雨傘 晴雨兼用 ジェットスキー 水上バイク PWC マリンアイテム 日焼け防止 日焼け対策 紫外線対策 UVカット 大きいサイズ 日よけ

ブランド： UNLIMITED（アンリミテッド）
品名： RACING PARASOL（レーシング パラソル）

The highest quality stretch and comfort make these boxer shorts the ultimate in fit.
Can also be used as everyday underwear!
It is also recommended as a sports inner layer for wetsuits, board wear, and snow pants.

■Material 92% polyester
Elastane 8%
Lining: 100% cotton

■Applicable waist size S size: 74-80cm
M size: 78-85cm
L size: 84-89cm
XL size: 88-94cm
XXL size: 92-98cm

■Actual product size (waist)
S size: 68cm
M size: 72cm
L size: 76cm
XL size: 80cm
XXL size: 84cm
*Please note that there may be errors due to measurements taken by our staff.

[Disclaimer]
Underwear worn directly against the skin cannot be returned or exchanged due to hygiene considerations.

SEA-DOO 4-stroke 1503 (excluding 2018 and later models, 300 and SPARK)
●Genuine part number (OEM): 296000307

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

100%ポリエステル製のMid Weight Dura Stretchを使用、水辺の冒険に優れた耐久性と柔軟性を提供します。ドローストリング付きの固定式ウエストバンドが快適で確実なフィット感を保証し、水中で自由に動けるようにします。スクリーンプリント、テーピング、刺繍のディテールがこのボードショーツにスタイルのタッチを加え、ビーチにもストリートにも最適なアイテムとなっています。

Jetpilot F4 Mens Boardshortsには、隠しウェルトジッパーポケットがあり、水中で必需品を安全に収納することができます。カスタムトリムと3色（ブラック/ホワイト、ブラック/グリーン、ブラック/オレンジ）のカラーリングは、このボードショーツにユニークでスタイリッシュな印象を与えてくれます。

・20インチアウトシーム
・ファブリケーション ポリエステル100％ミッドウェイト・デュラ・ストレッチ
・ドローストリング付き固定ウエストバンド
・スクリーンプリント、テーピング、刺繍のディテール
・隠しウェルトジッパーポケット
・カスタムトリム

ブランド：　JETPILOT（ジェットパイロット）
品名：　F4 メンズ ボードショーツ（F4 Mens Boardshorts）
対象：　大人用（メンズ）
素材：　100%ポリエステル製
カラー：　ブラックオレンジ ブラックホワイト ブラックグリーン
カテゴリー：　ボードショーツ ハーフパンツ ボトムス 海水パンツ 海パン
用途：　ジェットスキー 水上バイク PWC マリンスポーツ 海 川 レジャー アウトドア

[Set contents]: 1 holder bag (made of neoprene), 1 lashing belt (metal part made of stainless steel), 2 gunwale hooks (aluminum poly coated). *Gasoline cans are not included in the product.
●By installing it, you can load horizontal 20L gasoline cans on the rear deck.
●Space is required approximately 300mm before and after the deck surface.
*Cannot be used or installed on boats with an R-shaped gunwale. *

●JL399 holder set bag only.
●Convenient for storing gasoline cans in your car or on the steps of a standing jet without getting dirty.
*Gasoline cans are not included.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

■Size Length: approx. 40cm Thickness of inner float: approx. 2.0cm
■Installation opening: Compatible with vine tip (largest point) 1cm, thickness around 3mm

Chums is a popular outdoor brand born in America.
It is a simple, high-quality product that is made of carefully selected materials that feel good to the touch and are comfortable to wear.
This glasses strap is perfect for water sports such as playing in the sea, rivers, boating, yachting, kayaking, canoeing, rafting, and personal watercraft.

A sports band type that is easy to install and securely secures the frame.
Made of high-density foamed urethane material, it floats on water.
The universal fit allows most glasses to be securely attached by simply inserting them into the rubber.

[Note] Cannot be attached to thick temples or special shaped glasses.
Please make sure it floats in shallow water before use.

●Genuine TEMPERATURE SENSOR SEA-DOO ♯420222422

[Applicable model] KAWASAKI Kawasaki
ULTRA130 / ULTRA150

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*As this is a made-to-order item, it will take approximately one week. No returns or exchanges or cancellations

[Compatible with] SEA-DOO pump diameter 159mm 260/255/215

●WSM stainless steel wear ring 159mm
●OEM #267000372

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.

■Heat press foam plastic frame ■100% UV protection polycarbon lens ■Rubber adjustable strap for a great fit!
■Air ventilation port prevents lens fogging ■Mesh soft case included ■It floats on water even if dropped, so don't worry

Prevents loss when dropped into water during active play near the water.
The lightness of the fitting reduces the burden on your face.

●Genuine part number (OEM): 269501984 (old part number: 267000917)

●SGS end fitting●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

[Applicable model] YAMAHA Yamaha
VX series (~2014)
VX / 110DX / CRUISER / VXR* / VXS
*For the new VXR, the product number [Y-5S-1: Silver, Y-5B-1: Black] is compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

Y-5S Silver
Y-5B black

[Adapted model] SEA-DOO
RXT-X300/230 (2018~)
GTX LIMITED 300 (2018~)
GTX 155/230(2018 ~ )
WAKE PRO (2018~)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-15B black only

[Compatible models]
KAWASAKI Kawasaki 800X-2

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Handle] The handle part is also reinforced with double layers of fabric.
3. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

[Adapted model]
★For YAMAHA SJ (96~) only
★KAWASAKI 550SXi/650SX/750SX/750SXi

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Handle] The handle part is also reinforced with double layers of fabric.
3. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

Y-0

[Applicable model] YAMAHA Yamaha
VX series (new model (2015-2018) VX / VXR / VXS / VX Cruiser HO / DELUX)
GP1800(2017)

*For VXRs up to 2014, the product number [Y-5S: Silver, Y-5B: Black] is compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

Y-5S-1 Silver
Y-5B-1 black

[Adapted model] SEA-DOO
GTR230(2017-2020)
GTI 130(2011-17)
GTI SE 130(2020)
GTI SE 155(2011-13)
GTR215(2012-16)
GTR-X 230(2017-19)
WAKE 155(2011-16)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-17B black
S-17S Silver

[Applicable model] SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-13S Silver
S-13B black

A life jacket made of wet material that is gentle on children's delicate skin.
This model is thicker than the nylon type and has excellent protection functions.

■MATERIAL Chloroprene

■Applicable height size
M(8-10): 110-120cm
L(12-14): 120-130cm

■Actual waist circumference/length
M(8-10): 70cm/43cm
L(12-14): 78cm/45cm

■US Coast Guard certified product

*Compatible with special legal equipment for small vessels
*When registering children's equipment as legal equipment, please be sure to refer to the website of the Japan Small Vessel Inspection Organization.

• Capacity: 4 people
• Towing point x 1
• Size: 362 x 110 x 53 cm
• Double stitched nylon
• Boston Valve
• Quick Connector
• 840 denier nylon cover
• 28 gauge PVC

トップフックの長さがショートになって新発売です。
ウエットスーツやドライスーツののネック仕様によってショートまたはロングをお選びいただくとより便利にご使用いただけます。

折りたたみ開閉式なので、たたんだままネック部分からスーツのなかにハンガーを入れてセットします。
ハンガーの厚みでスーツのなかに空間ができ風通しがよくなり早く乾きます。
またハンガー跡をつけることなくウエットの乾燥を速める構造です。
簡単操作でスムーズな着脱、「使い易さ」にこだわったワンタッチの操縦性は
ネックエントリーのウエットでもスムーズに着脱可能です。

■国産品
■材質　本体：PP　/ フック部：アルミ

負荷の大きいフックには耐久性・耐腐食性抜群のアルミを採用。
6mmの極太アルミフックは、海辺や自宅ベランダなど様々な環境下でもがっちりホールドし、海水からの腐食にも最強です。
さらにアームの付け根を幅広にした「強い」ハンガーです。
水分を逃がすコンケーブ（溝）とエアバント（穴）のＷ効果で速乾性をアップ！

【ご注意】
※取り外しの際は、指を挟まないようにご注意ください。
※ウェットスーツ専用です。その他の目的では使用しないでください。

【ウエットスーツの保管方法】
ウエットスーツの劣化のスピードを少しでも遅くするには保管方法が重要です。
ゴムの劣化の原因となるのは「塩」と「直射日光」なのでこの２つを避けて保管しましょう。
日陰の涼しいところでしっかりと塩抜をして乾燥させれば劣化のスピードが抑えられるはずです。
またウエットスーツを保管する際、折りたたんでしまうと折れ目の部分がつぶれて戻らなくなってしまいます。ハンガーで吊るし折らない状態で保管するようにしましょう。

サーフィン　ボディボード　ウエイクボード　ウエイクサーフィン　カイトボード　フライボード　ダイビング　SUP  ウインドサーフィン　カヤック　カヌー　マリンスポーツ

Premium 4 Way Strech ボードショーツ 
４方向に高い伸縮性を発揮するエコストレッチ生地を採用したプレミアム4ウェイストレッチボードショーツ。動きに制限がなく、激しい水上アクティビティでも自由に動ける最高のフィット感を提供します。サーフィンやジェットスキー、その他のマリンアクティビティにも最適です。

ノンスリップウエストシステムが内側ウエスト部分に施されており、激しい動きでもショーツがずれることなくしっかりとフィット。速乾性に優れた技術を採用しており、アクティビティ後もすぐに乾き、不快感を軽減します。ウエストのドローコードにはUNLIMITEDブランドロゴの抗スリッププリントが施され、ずれや緩みを防ぎます。
※軽量な生地を使用しているため、特に濡れた時には裏地が透ける場合があります。インナーの上にご着用ください。

主な特徴

• 4ウェイストレッチ生地: 最高レベルの柔軟性と快適さで、アクティビティの動きを自由に実現。

• エコドライポリエステル: 環境に優しいリサイクル素材で、速乾性に優れ、持続可能な選択肢を提供します。

• ミディアムフィット: 快適でありながらアスレチックなシルエットを実現する、バランスの取れたフィット感。

• シームレス構造: 縫い目がない仕上がりのため、肌への摩擦が減り、滑らかでストレスの少ない着用感を提供します。

• ノンスリップシステム: 内側ウエスト部分の抗スリップ処理により、激しい水上スポーツ中でもショーツがずれません。

• ジップポケット: サイドにジッパー付きポケットがあり、スタイルや快適さを損なうことなく、必要な小物を安全に収納できます。

• ノンスリップウエスト紐: ウエストのドローコード（紐)にはUNLIMITEDブランドロゴの抗スリッププリントが施されお洒落なワンポイントと共に、フィット感が長時間維持されます。

あらゆる水上アクティビティに最適
快適さ、パフォーマンス、スタイルが一体となったボードショーツは、サーフィン・ジェットスキー・ウェイクボード・SUP等、水上スポーツを愛するすべての人におすすめです。

サイズ表

実寸（cm）:

注意:

• 提供のサイズは参考値です。個々の体型や好みによって最適なフィット感が異なる場合があります。
  
  
• 軽量な生地を使用しているため、特に濡れた時には裏地が透ける場合があります。インナーの上にご着用ください。

ボードショーツ メンズ ハーフパンツ 海パン ラッシュガード 水着 サーフィン ウェイクボード マリンスポーツ ジェットスキー 水上バイク PWC レジャー アウトドア 海水浴

ブランド： UNLIMITED（アンリミテッド）
品名： BOARD SHORTS Pink（ボードショーツ ピンク）

ロングセラーの「UNLIMITEDタイダウンパッド」のデザインがリニューアル

ポイント

• アイコニックなカラーバリエーション
  ブラック（BK）、カーキ（KH）、グレー（GY）の3色展開。
  アウトドアにマッチするシンプルなデザインに、高級感のあるUNLTDの
  ラバーロゴパッチがアクセントを添えます。

• 新改良マジックテープ
  接着力が強化され、繰り返し使用しても毛羽立ちにくい仕様です。
  耐久性もアップし、頻度の高いご使用でも安心してお使いいただけます。

• 高品質な素材
  厚さがしっかりした5mmのネオプレン素材を採用。
  頑丈さと優れたクッション性で、大切な船体をしっかりと保護します。

商品スペック

• カラー: ブラック（BK）、カーキ（KH）、グレー（GY）
• サイズ:
  • 展開時：約22cm × 19cm
  • 巻時：約22cm × 6.5cm
    ※縫製により±5mm程度の誤差が生じる場合があります。

最大限の柔軟性とパフォーマンスを実現

UNLIMITEDプロライダーからの詳細なフィードバックを基に、動作を徹底的に分析し、繰り返しテストを行うことで、理想的なデザインを完成させました。非常に伸縮性の高い素材を採用することで、優れた快適性とパフォーマンスを実現したウェットスーツです。
サイド部分のデザインは、動きの自由度を高めるだけでなく、スリムで美しいボディラインを実現。機能性とスタイルを兼ね備えた完璧なバランスを提供します。
ユニセックスデザインにより、さまざまな体型に対応。
男女問わず美しくフィットするよう設計されています。

UNLIMITED　RUSH

さらなるパフォーマンス向上を目指して、UNLIMITED専属プロライダーの監修のもと設計されたウェットスーツ。PWC（パーソナルウォータークラフト）の「パワー」、「スピード」、「安定性」を最大限に引き出す仕様に重点を置いています。時代の洗練されたスマートさを体現するこだわりのウェアです。

特徴

• ショルダーベルクロ
  左肩のロングジョンベルクロで、着脱がスムーズ。
• スタビライズパッド(ひざ前部分)
  ニーパッドがグリップ力を向上させ、安定したライディングをサポート。
• 2.5mm フレックスネオプレン
  従来の素材から更に進化した新素材。肌触りが良く、さらに高い伸縮性と軽量化を実現。
• ニーフレクション(ひざの関節部分)サポート
  ひざの裏部分は動きを妨げない屈曲構造で、滑らかな関節の柔軟性を確保。AIRFLOWテクノロジーを採用し、通気性を向上。快適なライディングを実現します。
• アンクルジッパー
  ジッパー付きで着脱が簡単。スライダーはベルクロテープで保護可能。

別売りセットアップアイテム：RUSH WET JACKET (品番: UWA0611) 
別売りセットアップライフジャケット：RUSH S/E LIFE VEST(品番: UV0603)

上記のアイテムと組み合わせて着用可能。

実寸サイズ表 (cm)

*サイズは平置きで測定しています。フレックスネオプレンは非常に伸縮性のあるウェットスーツ素材のため着用時に伸びます。
*サイズはUSメンズ規格に準拠しています。
*MW/LW/XLWは幅広めサイズです。
*ピンクはXS/S/M/L/XLサイズのみの販売です。

注意

• フレックスネオプレン: 上記の寸法は平置きでの実寸です。フレックスネオプレン素材は非常に伸縮性が高いため、着用時に体に合わせて伸びてフィットします。
• 陸上と水中でのフィット感の違い: 陸上での着用時、ウェットスーツは水中よりもタイトに感じられる場合があります。水中では素材が伸び、体にフィットしてより快適な着心地を提供します。そのため、陸上での試着時にややタイトに感じられても、水中では適切なフィット感が得られるよう設計されています。

ウェットスーツ ロングジョン メンズ レディース ジェットスキー PWC 水上バイク マリンスポーツ 水上スポーツ セットアップ

ブランド： UNLIMITED（アンリミテッド）
品名： RUSH WETSUITS JOHN（ラッシュ ウェットスーツ ジョン）

A lightweight and durable skull USCG vest.
The surface is made of lightweight cardboard knit material, and the buoyancy body is made of PVC foam that has sufficient buoyancy and does not easily collapse. Open type with 2 buckle front zipper.
Neoprene types are popular not only because they are soft to the touch, but also because they have a luxurious feel that nylon types lack.

Since it is a US Coast Guard product, it can also be used for domestic JCI inspections.

■MATERIAL: Polyester lining ■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)
■Lifesaving whistle equipment

■Chest size adaptation size
M: 94-100cm
L: 100-106cm
XL: 106-112cm
XXL: 112-118cm

This women's life jacket is made of neoprene material that is gentle on the skin and comfortable to wear.
The front zipper and two straps provide an excellent fit and are suitable for vigorous movements. Can be used for all types of water sports, including jet skis, wakeboards, and SUPs!

Neoprene life jacket for women

■US Coast Guard certified product (PWC limited JCI preliminary inspection certified product)
■D-ring and whistle included

■ Suitable chest size S (8): 77cm
M(10): 82cm
L(12): 87cm

Personal Watercraft PWC Coast Guard Certified Products Jet Ski Water Bike Life Vest Life Jacket Kawasaki Kawasaki Jet Ski YAMAHA Yamaha Marine Jet MARINEJET SEADDO Small Boat Special Life Jacket JCI Boat Inspection Coast Guard Boat Inspection
　

This floating vest is recommended as an item that supports safety when playing in waterside leisure activities such as the sea or river. It is made of wetsuit material that is gentle on your child's delicate skin.
It is thicker than the nylon type and provides better protection.

[Actual size when laid flat]
●S size [Length] 39cm [Shoulder width] 28cm [Width] 38cm
●M size [Length] 41cm [Shoulder width] 32cm [Width] 41cm
●L size [Length] 45cm [Shoulder width] 35cm [Width] 43cm
●Buoyancy: [S size] 4.5kg [M size] 5.0kg [L size] 6.0kg

■ Recommended height S: 110-130cm
M: 120-140cm
L: 130-150cm　

Size free

Excellent water absorption! A generously sized poncho for changing clothes.
It's made of microfiber fabric so it's very lightweight.

It can be used not only at the pool, at the beach, and when playing in the water, but also in all outdoor situations.

Excellent water absorption! So of course you don't need a bath towel.
The latest microfiber fabric is very lightweight and compact to carry, and the microfiber gently wraps your cold body.

■ Finished dimensions: Width 79cm Length 111cm

■Material: Microfiber (80% polyester, 20% nylon)

jet ski watercraft watercraft watercraft
Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Snorkeling Fishing Marine Sports Skiing Snowboarding Trekking Camping Glamping

This is a top-of-the-line model with full specifications including a front zipper, small zipper, and socks.

■Color: Black/Gray

■Applicable height: M (165-168cm) L (170-175cm) XL (175-180cm)

■Material: High performance breathable and waterproof material “VAPOR PRO” &
Wear-resistant material “600D”

■Features
TIZIP waterproof zipper waterproof seal processing
CR neck & wrist sticker,
2 pockets TPR patch adjustable cuff motion tracking panel design

■Specifications
Neck: Chloroprene Wrist: Chloroprene Socks: Latex

●Features
1. Chest zipper design that can be easily put on and taken off by one person
2.The fabric is made of breathable and waterproof material, VAPOR PRO.
3.Waterproof seal keeps you dry
4.Easy to move with dynamic pattern technology “ACT”
5. Urethane knee pads are used for the knees, and abrasion-resistant material is used for the hips.
6. Pockets on sleeves and chest (pockets are not waterproof)
7. Comes with a small zipper for smooth bathroom use

[Notes on dry suits]
The material itself does not retain heat, so innerwear must be adjusted according to the outside and water temperatures.
If you don't need heat retention, we recommend wearing absorbent innerwear to prevent sweat. The nylon lining is treated with a special coating, so if the inner fabric is scratched by hard fabrics like denim or metal fittings like key chains, the waterproof function may decrease, so it should not be worn as innerwear. Please be careful sometimes. Also, since the material is nylon, it is sensitive to heat, so please avoid bonfires, etc.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

Personal watercraft (PWC)
water motorcycle water bike
Kawasaki JETSKI Jet Ski
YAMAHA Marine Jet
SEADOO Yacht Boat Kayak Canoe

[Manufacturer] SUBARU
[Car model] Legacy Touring Wagon
[Compatible car model] DBA-BR9/BRM
[Year] H21.5-H25.4
[Compatible grade] 2.5GT, 2.5i EyeSight

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] F-1
[Processing] D-1
[Drilling] 2
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] SUBARU
[Car model] Legacy Touring Wagon
[Compatible car model] DBA-BR9/BRM
[Year] H21.5-H25.4
[Compatible grade] 2.5GT, 2.5i EyeSight

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] F-1
[Processing] D-1
[Drilling] 2
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] SUBARU
[Car model] Legacy Touring Wagon
[Compatible car model] DBA-BR9/BRM
[Year] H21.5-H25.4
[Compatible grade] 2.5GT, 2.5i EyeSight

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] F-1
[Processing] D-1
[Drilling] 2
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Lexus NX

[Compatible models] AYZ10,15 (hybrid)/AGZ10,15 (turbo vehicle)

*For turbo cars, F Sport is also available.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

[Traction power] C
[Ball mount] B-8
[Installation difficulty] ★☆☆☆☆
For turbo cars, F Sport is also OK.

[Stainless steel hitch (SHC)]
The main bar and accessories (ball mount, hitch ball, detachable pin) are both made of stainless steel.

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Lexus NX

[Compatible models] AYZ10,15 (hybrid)/AGZ10,15 (turbo vehicle)

*For turbo cars, F Sport is also available.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

[Traction power] C
[Ball mount] B-8
[Installation difficulty] ★☆☆☆☆
For turbo cars, F Sport is also OK.

[Stainless steel hitch (SHC)]
The main bar and accessories (ball mount, hitch ball, detachable pin) are both made of stainless steel.

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

DAIHATSU HIJET
■ Compatible model: 3BD-S510P
*Jumbo Extra/Jumbo Standard/High Roof/Extra*Compatible with minor change models released after December 20, 2021.

■Towing capacity: 550kg
■Mount: Slant low type, downward facing ■Hitch ball: Short ball *No drilling required *You can specify the mount insertion hole shape when ordering. [50mm square/2 inch square/50 round]
*If no specification is given, 50 pieces will be the standard.
*The stainless steel type is not compatible with 2 inches. If it is 2 inches, the mount is not included.

Steel (steel type)
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

This is a dispenser exclusively for the salt removal and salt damage protection agent "DESALT".

This dispenser makes your work easier.
Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.

[Note] DESALT concentrate is sold separately.
DESALT is used in PWC and boat engine washing to clean, purify and help prevent salt build-up and inhibit engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

It can be used on boats, trailers, cars, diving gear, fishing rods and other marine items, home windows and anything that comes into contact with salt water or sea spray.

• The original solution can be used more easily with the Desalt dispenser.
• You can also dilute it and use it to soak parts.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• Please purchase the original solution (2L or 5L) together and use it.

Jobe Elite Wake Combo Handle & Rope Line Set for Wakeboards

This is the most standard handlebar width and is recommended for beginners to intermediate level riders.
A pencil-shaped EVA float keeps the line away from the propeller for easy retrieval.

• Polyester covered EVA grip
• 38cm width handle
• 28mm thick round grip
• Main rope 16 strands
• Adjustable from 1.5m to 21.3m

• Polyester covered EVA grip
• 38cm width handle
• 28mm thick round grip
• Main rope 16 strands
• Adjustable from 1.5m to 21.3m

• Made from 30% limestone based neoprene
• Adjustable webbing strap: 3.8 cm (x2)
• Front zipper for quick entry and exit
• Soft and flexible neoprene fabric
• Soft PVC Foam
• Unisex fit
• Buckles and YKK zippers

• Durable polycarbonate grommets on both ends
• Size: 26 x 10 x 7 cm

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Convenient for moving trailers.

Product name: Coupler handle Product number: SRX-030

One M12 bolt included

*For installation on trailers with inertia brakes,
A separate handle mounting bracket is required.

PUSH BUTTON RED

SEA-DOO genuine part number (OEM): 277002327 etc.

●Stop/start button for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 190 in the second photo.

CYLINDER HEAD GASKET

SEA-DOO genuine part number (OEM): 420950772 etc.

●Cylinder head gasket for SEA-DOO 1630 for ACE

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is No. 1 in the second photo.

This is a wake handle and line set product.
The floating handle (with float) has a non-slip EVA grip and is highly visible even for beginners.

■Specifications: 15-inch EVA prop grip, low-stretch polyethylene line ■Handle width 15 inches (38cm)
■Line length 70ft. 4 sections (55+5+5+5)