Collection: bestseller

This is a wake handle and line set product.
The floating handle (with float) has a non-slip EVA grip and is highly visible even for beginners.

■Specifications: 15-inch EVA prop grip, low-stretch polyethylene line ■Handle width 15 inches (38cm)
■Line length 70ft. 4 sections (55+5+5+5)

This is a hanger specifically designed for wetsuits made by Surflogic.

Shoes, gloves, etc. can be inserted into the top part, so they can be dried easily.
The lower part is 40mm wide and thick, so you can hang wet suits stably.

■You can choose from two styles: round hook and carabiner strap.
■Size: Main body W450mm/H430mm Thickness 40mm Hook length 37mm
■Weight: Hook specification approx. 500g Carabiner specification approx. 570g
■Color: Blue

【please note】
*When removing, be careful not to pinch your fingers.
*Please do not use it for purposes other than wet suits.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

A cotton hoodie with an upgraded feel made of felt-like fabric.
In addition to the switching design, there is also a simple kangaroo pocket and the JTPLT logo embroidered on the chest.

■Material: 80% cotton, 20% polyester, brushed lining

[Chest measurement size/actual size when laid flat]
M: 115cm
L:：120cm
XL: 124cm
*Please note that there may be errors due to measurements taken by our staff.

Boxer shorts based on the legendary classic model!

These seamless pants have no seams and fit perfectly to the body.
Recommended as an inner layer for wetsuits and board shorts.
Since it is a boxer type, it can also be worn as regular underwear.

Material: 70% polyester
20% nylon
Polyurethane 10%

■ Recommended waist size: Men's free size (73-87cm)

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin. Please be aware of this before placing your order.

The Rompa Slash with a back zipper is available only in baby sizes.
Protects your small body from cold and abrasions.

This is an essential sun protection product that protects children's skin, which has less melanin than adults and is vulnerable to harmful UV rays.
Stitched with soft threads that won't rub or hurt even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

■[Applicable size]
80cm: 70-90cm
90cm: 80-100cm
100cm: 90-110cm

*We cannot accept returns or exchanges for special price items.

[Compatible models]
YAMAHA / SEA-DOO PWC (excluding 4-stroke models)

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.

*We recommend supplementary charging after purchase.
When replenishing battery fluid, be sure to use distilled water or a special replenisher, as tap water may cause problems.

[Compatible models]
KAWASAKI Kawasaki 800SX-R(03-)/800X-2

■Plate length: 450mm

The feature of Works Dominator plate is the original D cut hole.
It attracts the hull and water surface, giving you a reliable grip in any water surface condition.
Designed to be longer than the genuine ride plate, it also improves straight-line stability.

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

Due to the large size of the product, the delivery address specified by the individual will be marked as "Unable to be delivered."
Please enter the company name, trade name, facility name, etc. in the shipping address.

RA6/8 (standard)
RA7/9 (Absolute)

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

Due to the large size of the product, the delivery address specified by the individual will be marked as "Unable to be delivered."
Please enter the company name, trade name, facility name, etc. in the shipping address.

Pajeromini H6~H10 (H51A/56A), Pajeloney H7.11~H10.9 (H57A)

*Free shipping (*Cannot be delivered to Okinawa/Hokkaido)
*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1. A room in an apartment building 2. A religious corporation, shrine, or temple 3. If it cannot be determined that it is a corporate building 4. If it is determined that there is a risk of intrusion by a delivery truck 5. If delivery is hindered due to other special circumstances When judged

There is a short zipper on the back that increases mobility, so you can straddle the seat without any stress.
The fabric is 2mm neoprene with comfortable flatlock stitching.
The large pocket with a drain hole is also very convenient.
The hood with Velcro fastener provides excellent protection against the cold and is removable.

■ Actual size (chest circumference/hem width/length/sleeve length)
SM (112 /116 /87 /48)cm
LXL (124 /128 /90 /50)cm

*Model size: Height 182cm, weight 70kg (wearing product size L/XL)

A high-float recreational vest made from durable nylon.

■Chest size XS: 70-80cm
S/M: 80-100cm
L/XL: 100-120cm

■US Coast Guard certified product (PWC limited JCI legal equipment compatible)
■D-ring and whistle included

*Male model size: Height 182cm (wearing S/M size)
*Female model size: Height 170cm (wearing S/M size)

Personal Watercraft PWC Jet Ski Kawasaki JETSKI Jet Ski YAMAHA Marine Jet SEADOO Small Boat Special Life Jacket JCI Boat Inspection Life Vest Life Jacket Coast Guard Certified Men's Women's Junior UNISEX Unisex WATERTOY Banana Boat SUP

Playing in the sea or river can often lead to foot injuries, but these children's marine shoes will eliminate that worry. They are highly breathable and allow any water that seeps into the shoes to escape quickly.
Since it is made of airplane material, it is amphibious and perfect for playing in the water.
The soles flex and move with your feet, making them extremely comfortable to walk in.

■Material: 2mm chloroprene, 5% spandex, soft rubber sole

■Size: 14cm to 23cm

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard
Children, Toddlers, Babies, Kids, Juniors, Marine Sports
ACTIVITIES WATERSPORTS BOAT YACHT KAYAK
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest

Wet long pants for children made of 1mm wetsuit fabric with good elasticity and less pressure.
It provides warmth, prevents sunburn, and protects children's delicate skin from scratches.

Even children who grow quickly can wear separates and types, even if the length is a little short.
It is also ideal for preventing injuries below the knees when playing on the rocky shore.
If you set it with the Tupperware sold in the series, you can protect yourself from the cold and expand your range of play.

■Material: 1mm chloroprene

■Product measurement values ​​(other than total length, flat/width representation)
[Size] Waist/cross width/thigh width (*)/knee width/total length [120] 56 /18 /16 /13 /62
[130]58 /20 /17 /14 /67
[140]62 /22 /18 /15 /72
[150]65/23/19/16/80
(*Thigh width = measured between the crotch and the knee)
・Please forgive any errors due to measurements made by our staff.
・Please use this as a guide.

Jet ski Watercraft Watercraft Watercraft SUP Snorkeling Scuba diving Surfing Marine sports Beach swimming Pool Trekking River fishing Boat Kayak Canoe UV care Sunscreen UV protection Water repellency

This life jacket is made from the same material as wetsuits and is gentle on children's skin.
Safety has also been taken into consideration, with features such as a crotch belt to prevent the hat from falling off, a whistle, and reflective tape on both shoulders.
This is a Japanese brand life jacket that puts children's safety first and also provides cushioning.

■MATERIAL 100% chloroprene

■ Suitable height size
S: 110-130cm
M: 120-140cm
L: 130-150cm

[Ordered products]

●Narrow type: Uses LEDs with a narrow irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- ----------------------------

●Bolt diameter size: M10

●Trailer side waterproof connector

Tether for YAMAHA

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

The long brim and flap provide the ultimate protection from UV rays, even in the strong summer sun.
The stretchy fabric fits any size child perfectly.
This is an amphibious summer cap.

■Material: 88% polyester, 12% polyurethane

■Size: FREE (head circumference 50-52cm)

*The red ribbon on top is not included.
*The rash guard worn is not included.

[Staff comments]
Made of rash guard material, it does not absorb water and does not become heavy even when wet.
It also protects the back of the neck, which is prone to sunburn, and protects children's delicate bare skin. If you pour water on it, the evaporative cooling effect will make it feel even cooler!
This is a convenient hat that can be worn outdoors in the strong sunlight at the beach or pool, as well as for everyday use.
The stretchy fabric fits snugly around your head and won't slip off.

Children, Kids, Elementary school students, Toddlers, Beach, River play, Water play, Glamping, Camping, Sunburn, UV care, Evaporative cooling, Cool cap hat with brim, chin strap, neck flap

The Romper Slash with back zipper is available only in baby sizes.
Protects your little one's body from cold and scratches.

This is an essential item for sun protection, as children have less melanin pigment than adults and are therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

*Returns and exchanges are not accepted for special price items.

■【Applicable size】
80cm : 70-90cm
90cm : 80-100cm
100cm: 90-110cm

This is a special price for clearing stock.
This life jacket is made from the same material as a wetsuit, so it is gentle on delicate skin.

■2mm Chloroprene

■ Suitable height size
S:110-130cm
M:120-140cm

●This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

This special life jacket is designed with your child's safety in mind. In the event that they fall into the water, it is equipped with a rescue belt behind the neck that allows them to be easily lifted up, and a belt around the legs to prevent the child from falling out.

■ Suitable height size S: 110-130cm (lower elementary school students)
M: 120-140cm (elementary school middle grades)
L: 130-150cm (upper elementary school)

■MATERIAL: Reflective tape/Rescue whistle included

[Caution] Not suitable as legal equipment for small boats. This product is a swimming aid and should always be used under parental supervision.
●If strong pressure is applied to the buoyancy material (foam), it may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

【correspondence】
KAWASAKI

This is a Velcro type wristband lanyard.
The tether cord has a whistle attached.

[Band color] x [Lanyard color]
A2109PFW Black x Black
A2103PFW Black x Red
A2107PFW Black x Blue
A2101PFW Black x Green

This is a marking buoy that is ideal for setting up courses for marine sports.
It can also be used as an anchor marker.

■Diameter: Approx. 20-25cm

[Note] Air injection nozzle is not included.

*Please purchase the air injection nozzle (part number: 97560) separately.
*The product will be shipped deflated.

Board shorts made of stretch material with accent piping and a simple logo patch finish.

Chris O'Shea's signature model.

1. Tech washer tie closure ■Waist size 28 inches (74-78cm)
2. Taped and scalloped block on dual front pockets
3. Sublimated body
4. Back zipper pocket
5. High stitch count patch
6. Lycra fly
7.Triple stitch crotch panel■Length is 19 inches (48.3cm)

30 inches (78-82cm)
32 inches (82-86cm)
34 inches (86-90cm)
36 inches (92-96cm)
*Please note that the applicable size varies depending on the waist design and specifications.

[Please note] As this is a special price item, we cannot accept returns or exchanges.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

Billet oil cap is
Simply replace the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It installs in minutes and is a great-looking, practical upgrade.
You can easily dress up your engine room.

■With O-ring
■Made of durable 6061 billet

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

[Compatible models] SEA-DOO GTX/RXT series (2010-2017) *Model without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*GTX series with iS (2017), GTX-S product number: 295100718
*GTX series with iS (2009-2016) product number: 280000460
*RXT-Xas (with suspension) product number: 280000586

●SEA-DOO genuine PWC cover.
●Designed for a perfect fit and made of fabric with excellent UV resistance.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*
-------------------------------------------------- ------------------------
●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc.
Please note that in that case, we will contact you before shipping.

A special life jacket designed with your child's safety in mind.
Since it is made of nylon, it is lightweight and can be maintained after use by simply washing it with water.
Since it is a series with adult models, parents and children can enjoy coordinating colors together.

■ Suitable height size for children: 110-120cm (with crotch strap)
Youth: 120-130cm (without crotch belt)
*Complies with the Small Vessel Special Law for youth sizes only

*When registering children's items as legal equipment, please be sure to refer to the website of the Japan Small Craft Inspection Organization.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Jet Ski Water Bike
Jet Ski Kawasaki YAMAHA SEADOO

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 920kg / 2000LBS

■Handle length: 210mm

*Body/handle only.

*Winch strap is not included.

[Compatible models] SEADOO SPARK

This provides dramatically improved control when cornering and in rough conditions.
It can be installed by bolting onto the original holes.

[Compatible models]
YAMAHA VX110 ('07-'14)

Max Loader Gate from Australian manufacturer WORX.
It is designed to take in water smoothly on rough or calm water surfaces.
Hook-up handling performance and top speed are not lost,
We test our products under the best conditions.

[Compatible models] KAWASAKI Kawasaki
STX15F
STX15S
STX12F
STX-R

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

■Size: 24cm(10")

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

A cap with a large "LOOK FAST and GO FAST" logo.

■The front panel of the hat features a custom embroidered logo.
The thick embroidery gives it an outstanding sense of luxury. The back style has gold brand embroidery.
■The wide and straight brim type, which is widely popular in street style, is extremely fashionable.
The arched brim blocks more sunlight from hitting your face, but it also reduces your visibility.
The UNLIMITED cap has a wide brim that blocks sunlight while ensuring visibility.
■One size fits all The size can be adjusted with a snapback closure (adjuster) at the rear.
■The inside of the brim is colored red to emphasize the design.

■For everyday wear such as sweatshirts, printed T-shirts and board shorts,
Add a cap for a street look...a popular casual style.

■Can be worn backwards with a collared shirt or polo
The UNLIMITED cap also has a logo on the back style, giving it a shrewd look.