Collection: bestseller

■4 wheels with strong stainless steel winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,200 x 960 x 661mm
■Frame: 70mm square
■Caster diameter: 150Ф

The 4-point support prevents front and back misalignment, making sling belt work easier.
Uses flexible and fixed casters of 150φ, allowing smooth movement over a long period of time.
Also, due to its large diameter, it rolls smoothly.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: J-210 PWC up to 3 people
■Total length x width x height: 1350 x 709 x 275mm (rail width: 440/340mm)
■Frame: 380mm square
■Caster diameter: 100Ф

*"J-209 Maintenance Stand High Grade" is recommended for boats weighing close to 500 kg.

Lowering the rail section improves runabout maintenance work efficiency!
The rail width is adjustable and all casters have stoppers.
Made of aluminum and specially anodized, it is lightweight and will not rust.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,340 x 955 x 410mm (rail width: 580mm)
■Frame: 70mm square
■Caster diameter: 125Ф

Since it uses anodized corrosion-resistant aluminum pipe (high strength pipe with center rib), it can be used with confidence even on lightweight and sturdy 500kg class boats.
Comes with a hook and rope to prevent it from slipping off.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■J-203S Single
■Total length x width x height: 1416 x 590 x 600mm (rail width: 300mm)
■Caster diameter: 100Ф

With a height of 600mm, this stand makes maintenance work on single boats easy.
The beautiful surface finish with special alumite treatment is perfect for display.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Compatible] Kawasaki SX-R (2017-)/SEADOO Spark, etc.
[Model Number] J-150S / Jet Launcher 2-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
Total weight: 23.5kg
Frame weight: 12.5kg
■Material: Aluminum

[About payment and packaging]
Manufacturer direct delivery products
●Payment only (cash on delivery not available)
●Cannot be bundled

[Capacity] 1L steel can x 1

Boasts excellent lubricity even in high-speed engines,
A base oil with special emphasis on thermal stability and oxidation stability.
Contains high-temperature cleaning additives to keep the inside of the engine clean.

KAWASAKI Kawasaki 4 cycle engine oil
4 stroke

●DENSO Iridium plug (NGK plug compatible with CR9EKB)
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Capacity] 4L steel can

- Boasts excellent lubricity even in high-speed engines,
●A base oil with special emphasis on thermal stability and oxidation stability.
●Contains high-temperature cleaning additives to keep the engine interior clean.

KAWASAKI Kawasaki genuine 4-stroke engine oil

[Model Number] J-1480-4X / Jet Launcher 4-wheel [Application] Compatible with all models (suitable for tandem and runabouts) * Center reinforcement frame included

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 37kg
Frame weight: 12kg
■Sliding rails and hooks are standard equipment

[Double hook specification]
Even models in the 300kg class can be moved easily and smoothly.
To change direction, lift the handle and set it in the 2W position, and the angled handle makes it even more convenient. Compared to a 2-wheeler, you can move even large, heavy boats just by pushing without having to lift and balance them.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

[Capacity] 1L x 20 cases

●A high-grade oil for jet skis with excellent lubricity and cleanliness.
●Suitable for both recreational and racing use.
●Blend of synthetic oil based on highly refined mineral oil.
●Since it is blended with synthetic oil, it suppresses the generation of exhaust smoke and the formation of deposits on the spark plug and inside the engine.
●It has excellent lubrication properties that bring out the full performance of the machine even under severe conditions such as when the internal temperature of the engine increases due to high speeds and high rotations.

■J0226-0001

[Capacity] 1L x 1 bottle

●A high-grade oil for jet skis with excellent lubricity and cleanliness.
●Suitable for both recreational and racing use.
●Blend of synthetic oil based on highly refined mineral oil.
●Since it is blended with synthetic oil, it suppresses the generation of exhaust smoke and the formation of deposits on the spark plug and inside the engine.
●It has excellent lubrication properties that bring out the full performance of the machine even under severe conditions such as when the internal temperature of the engine increases due to high speeds and high rotations.

■J0226-0001

*Case (product number: J0226-0001C, 1 case of 20 pieces) available for sale

[Capacity] 4L x 6 bottles case steel can
★★ Buying a case is a great deal!! ★★

- Boasts excellent lubricity even in high-speed engines,
●A base oil with special emphasis on thermal stability and oxidation stability.
●Contains high-temperature cleaning additives to keep the engine interior clean.

KAWASAKI Kawasaki genuine 4-stroke engine oil

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Compatible models]
KAWASAKI STX DI / ULTRA130 DI

● Compatible with NGK plug PZFR7G-G

[Capacity] 4L x 6 bottles case steel can
★★ Purchasing a case is a great deal!! ★★

●Excellent oxidation stability reduces viscosity changes due to oxidative deterioration, ensuring stable output characteristics.
●High cleaning dispersibility keeps the engine interior clean.
●Suitable for general driving to sports driving.

KAWASAKI Kawasaki genuine 4-cycle engine oil

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible models] KAWASAKI 1100STX (97) / 900STX (99-'00) / 900STS (01-02)

[Color] BLACK×WHITE

[Compatible models] SEA-DOO GTX-L300('18)/GTX155 ('18)/WAKE PRO 230('18)

[Color] Black diamond pattern
[Number of pieces] 10 pieces
[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

*SEA-DOO GTX-L300('19-'20)/GTX155 ('19-'20)/WAKE PRO 230('19-'20) is HT-8931DBKP.

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

[Compatible models] SEA-DOO RXT-X300 ('19-'20)

[Color] 2 tone diamond pattern black x green
[Number of pieces] 14
[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam

*RXT-X300 ('18) is model number: HT-894DBK

[Compatible models] KAWASAKI
900STX(01-05)/
1100STX(00-)/
STX-Di/
STX-R/12F/15F(-19)/15S

[Color] Two-tone diamond pattern black x orange
[Number of pieces] 7 pieces
[Back side] 3M adhesive tape included

Due to the grooves uniquely carved in HydroTurf,
Riders can get excellent grip and control.
Thick, high-density foam

[Compatible models] KAWASAKI
STX-15F/15S
STX-12F
1200STX-R
1100STX(00-)/DI
900STX(01-05)

[Color] Two-tone diamond pattern

[Number of pieces] 7 pieces

[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

[Disclaimer]
Currently, due to the build-to-order system, delivery time is approximately 2 months from the date of order.
Please note that as this is a made-to-order item, we cannot accept cancellations after the order has been placed.

*Logo position and logo color may change without notice due to manufacturer circumstances. Also, please note that the orientation of the diamond cut may be different vertically and horizontally, and these will not be covered by complaints.

[Compatible models] YAMAHA VX110 (05-09)

[Color] Black
[Number of pieces] 9 pieces
[Back side] 3M adhesive tape included

Due to the grooves uniquely carved in HydroTurf,
Riders can get excellent grip and control.
Thick, high-density foam

[Applicable model] KAWASAKI SX-R1500 (4 stroke)

[Color] 2-tone diamond pattern black x lime green
[Number of pieces] 4
[Back side] 3M adhesive tape included
HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

[Disclaimer]
Other colors are manufactured to order, so delivery will take approximately 2-3 months from the time of order.
Please note that we cannot accept cancellations of ordered items after the order has been placed.

[Compatible models] YAMAHA
VXS/VXR/VX SPT/VX CR/VX DLX(10-14)

[Color] Black x White
[Number of pieces] 9 pieces
[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This is a stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

[Compatible models]
YAMAHA VN / XL1100 (98) ・760 / 700 (98-99)
Diamond black with stickers 10 pieces

HydroTurf's unique horizontal grooves give riders excellent grip and control. Thick, high-density foam that is extremely durable.
*The image is HT-78BK.

Odyssey

[Compatible model] RC1

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

step wagon

[Compatible models] RK1, 2, 5, 6

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Hole required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

acti

[Compatible model] GD-HA7

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-2
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

N BOX custom

[Compatible model] JF1

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

crossroad

[Compatible models] RT1, 2, 3, 4

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-4
[Installation difficulty] ☆☆
Drilling required (floor)
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package other than 24Z

[Compatible models] RG1/3

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package other than 24Z
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package G/S package G/LS package 24Z

[Compatible models] RG1/3

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package G/S package G/LS package 24Z
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package other than 24Z

[Compatible models] RG1/3

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package other than 24Z
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

stream

[Compatible models] RN6/7/8/9

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Elysium

[Compatible model] RR1

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-8
[Installation difficulty] ☆☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *Compatible with S/LS package G/S package G/LS package 24Z

[Compatible models] RG1/3

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Heat shield cut, required hole drilling Compatible with S/LS package G/S package G/LS package 24Z
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

CR-V

[Compatible models] RE3/4

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

air wave

[Compatible model] GJ1

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆
Hole required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.