Collection: bestseller

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

●An oil-resistant type NA sheet that has a high compression rate, excellent resistance to mating surfaces, and exhibits high sealing performance against both oil and moisture.

●It has better vibration absorption than the genuine product and has improved airtightness. Excellent oil and antifreeze resistance.
Excellent sealing properties against oil, moisture, and antifreeze.

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

A versatile mixer that can perform washing and mixing at the same time.
Please use by connecting the water hose and attachment.

If you put water or undiluted solution into the detergent tank, it will be diluted and squirted out.
There is a scale on the cup, making it easy to measure the liquid.
You can leave the water running, so when the inside of the tank becomes transparent, it's a signal that it's done.

You can switch between water and foam (mixing mode) with the switch on the lid.
The foam can be adjusted to three levels: small, medium, and large, and the amount of foam can be adjusted according to the purpose.

■Water/foam (mixing) switchable
■Foam (mixing) mode: 3 levels of adjustment
■No STOP/OFF function

It is a useful item that can be used in many other ways.

★Add salt corrosion inhibitor...
Flushing of jet skis, outboard motors, in-boat engines, etc.

★Connect to a high pressure washer...Clean screen doors and shutters

★Connect to a watering nozzle for watering plants, sprinkling water, showering pets, cleaning windows, etc.

JL15001SL Silver
JL15001GD Gold
JL15001R Red
JL15001OR Orange
JL15001LG Lime Green

●Outer diameter: approx. 8mm
●Inner diameter: approx. 5mm
●Length: Approximately 100cm

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

A slip and scratch prevention protector made of EVA mat.
Made of the same material as the deck mat, it is essential for preventing scratches from ratchet parts such as belts.

■Quantity: 1 set of 2 ■Material: Made of EVA mat ■Size: 100 x 230mm

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

[Adaptation] YAMAHA 760/700
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Great value 2 piece set sale

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

Same product as jet launcher standard equipment.

■10Ф
■Made of stainless steel
jet launcher repair parts

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

FACTORYZERO Factory Zero Jet Launcher
[Compatible products] For J-1480, J-1480-4, J-1480-4X
[Size] Width from center to center of pipe is 480mm

The handle pipe has an angle that bends downward, making it easier to lift it out of the water.
Factoryzero Jet Launcher Repair Parts

KAWASAKI 4-stroke ALL
STX-12F
STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp LED STOP LUMP

[Product contents]
●Lamp body
●Connection terminal
●Mounting screw

【Product details】
Light dimensions: 110×30×10mm
Screw hole: 6.5mm
Cord length: 800m

A highly water resistant and durable LED lamp with a flexible lens body.
The compact body allows installation anywhere, and it is very easy to install on curved surfaces using strong adhesive tape.
By lighting up the LED lamp, when touring, etc., you can quickly notify following boats of a slowdown, and can be expected to be effective in preventing rear-end collisions.
You can also notify people around you of your boat's presence from a distance.
Adopts high-brightness LED and boasts high visibility.
A flexible light lens body that can be installed anywhere is ideal for PWC.

[Regarding installation] Please install using the double-sided tape on the back of the lamp body.

[Information] If you are looking for a lamp unit, please use [Product number: JL23011].

[Compatible models] YAMAHA
SHO / FX CRUISER SHO / FZS / FZR / VXR / HO(09~)
Displacement 1800cc or more
(*Equivalent to genuine product number 69J-13440-03)

●External oil filter

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Information] Please use part number: JL16006 for removal.

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

●Caulking thickness: 12.7~15.9mm
●Flange diameter: 15.9mm
●Prepared hole: Ф4.9~5.0mm
[Quantity] 15 pieces

Race bumper splash guard installation is very convenient.

[Compatible models] KAWASAKI
SX-R1500 NEW SX-R
800SX-R
SXi-Pro/SXI/SX

handle pole spring
By attaching it with a spring that is approximately 70% stronger than the original, the handle pole weight is reduced by 60%, reducing the burden.
This is an essential item when using the genuine handle pole.

ON-OFF-ON 3-way rotary switch.
Two electrical components can be operated separately.
It can be used regardless of manufacturer model.
High quality and reliability are highly evaluated overseas.
■Produced in Japan

■Completely waterproof
■Cord length: 3m
■Specifications: 12V 5A

[About installation] Hole drilling (Ф13.5mm) is required on the mounting part.

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

●This is an anchor set that can be easily made by filling the anchor back with sand or stones.
●After use, it can be folded and stored compactly.

■Adaptation: For PWC or small jet boat
■Rope length: Approximately 450cm (with soft float)

FACTORYZERO Optional item for jet bank manufacturers. Stronger than regular products by welding.

*Sold starting from 1 piece.
*If you are ordering one, please specify "left or right" when looking at the jet bank from behind.

[Product information]
●Cannot be bundled...In order to prevent scratches and damage, items cannot be shipped together (combined) with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (bundling)" is not possible.

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

●“Reinforced axle shaft kit” for heavy boats. 260mm.
●If you are towing with power, we recommend replacing it.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

This is a JETPILOT wristband with Velcro fastening.
Use to secure the lanyard to your wrist.

■Contents: 420ml spray can

Dirt removal and shine wax.
Contains ultra-fine particle compound.
It removes dirt and repairs even minute scratches without adversely affecting dark painted surfaces.
It also maintains a strong gloss with high quality silicone wax.

■Contents: 420ml spray can

Excellent rust prevention properties for metals

For loosening rusted bolts and nuts.
Excellent water displacement performance, suitable for maintenance after riding in the rain on motocross cars and general cars.
Please use it for lubrication and rust prevention of various moving parts during vehicle delivery.
It can also be used as a moisture barrier for battery terminals, spark plugs, starter motors, etc.

■For 4-wheel SUV/LRV
■Total length x total width x rail width: 3,360 x 1,160 x 520mm

Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

Introducing the Jet Ski Dry Polo Shirt!
With UPF50+, it's a great item for summer as it blocks 98% of UV rays.

■Material: 100% polyester

■Size (height, length, width, shoulder width, sleeve length) cm
M: 165-175・68・51・45・21
L: 175-185・71・54・47・22
LL: 175-185・74・57・49・23

KAWASAKI Kawasaki genuine (black)
■Contents: 100g

Silicone liquid gasket.
It has excellent cold resistance, heat resistance, water resistance, and oil resistance, and hardens at room temperature to form a rubber-like elastic body.

■Standard 4 wheels with winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

Trailer slope rail, compatible with rail width 350 mm (rail center to center)

By installing a trailer slope rail, the JET can be raised and lowered smoothly, and the tail lamp, hose, etc. are not submerged in water, which prevents damage to the trailer and makes it last longer.
When not in use, it can be stored between the trailer and the PWC body.
To install, simply attach the rail guide (included) to the trailer body.

●By installing a trailer slope rail, you can smoothly raise and lower the boat, and the tail light, axle, etc., will not be submerged in water, preventing damage to the trailer and extending its life.
●Made of durable steel (iron galvanized) and 50 x 50 square pipe, so you don't have to worry about pulling it up with a winch.
(Please have 2 to 3 people support you when pulling it up. If you force it up using only the winch, it may cause damage to the winch.)
●When not in use, it can be easily stored between the trailer and the PWC body.
(Please note that depending on the boat or trailer, it may not be possible to store it, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle.
●For processing on the trailer side, simply attach the rail guide to the rear frame of the trailer using U bolts. (There is an installation confirmation at the end of the page)
*Please note that if the frame on the trailer side to be installed is low, the rear end of the slope rail will be close to the ground, which is dangerous.

Q. Is it possible for the "Rail Guide Section" to fit between the trailer's bank rails and be attached to the rear end frame?
The rail guide part size is 420 mm in total horizontal length.
The U bolt size for installation is 112 mm effective width and 76 mm depth.
Especially if the R shape is quite deep on the rear end frame, the U bolt may not fit.
In that case, it is possible if you prepare a larger U-bolt etc. separately.
*If installed on a frame with a tight radius, the bottom of the boat may hit the rail guide.
In that case, raise the bank rail and adjust. We recommend that you check the size of the rail guide parts using a dummy in advance.
*If there is a license plate etc. on the mounting part, it is necessary to move the plate etc. (Other than public roads)
*Depending on the compatibility of the boat and trailer, it may not be possible to store the rail.
The space for the rail to pass through after installation requires a gap of approximately 85 mm in height and 71 mm in width.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment (bank transfer) only. (Cash on delivery not available)
●Cannot be bundled

●Adaptation: Kawasaki 1500SX-R
●Size 1400×360×300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

The extra-thick round pipe joint and strong frame design allow for safe use. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
It can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Adaptation: PWC up to 3 people
●Size: J-345SX 1400x380x450mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

racing beach stand runabout

It has a strong frame design with an extra-thick round pipe joint and a total of 4 W belts on one side to prevent opening, so it can be used safely even on heavy boats. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Applicable: Single boat only
●Size: J-333SX 970x350x300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: J-333SX is equipped with a PVC cover as standard

racing beach stand single

The round pipe joint makes the frame even stronger, so you can use it with confidence on your precious boat.
In addition, the rail part has a PVC cover, so the boat can be easily mounted without getting scratched.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Model Number] J-1480X / Jet Launcher 2-wheel rail width 480mm type [Suitable for] Tandem / Runabout models

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 22kg
Frame weight: 10kg

Made of aluminum, it is lightweight and rust-free, and each joint is bolted and welded for excellent durability.
Nylon roller bearing plastic wheels and block pattern tires make it easy and smooth to move around!
It is 30mm wider than the previous 450mm width.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

[Applicable] Kawasaki 1500SX-R (2017~)/SEADOO Spark, etc.
[Product number] J-150S / Jet Launcher 4 wheels

■Size (full length x full width x rail width): 2050 x 820 x 300mm
■Total weight: 31kg
■Frame weight: 13kg
■Material: Aluminum

●1.4 times stronger than conventional frames
●Each bracket part is fixed with M8 bolts and nuts without any play.
●The frame is long and well-balanced to match the length of the boat, and the axle has been strengthened to withstand the weight of 4 cycles.
●The axle shaft is the same as the jet launcher for runabouts (left and right pipes), and the collar between the axle frame and the shaft is made of glass fiber-containing plastic molding and is tightly fixed without play.
●The handle has a bar grip type shape so that it can be easily carried by two people on both sides.
By extending the overall length and raising the ground clearance slightly, you don't have to worry about the machine hitting the ground even when lifted diagonally.

*Please replace the shaft and plastic collar regularly.
*2 to 3 people are required for loading at the water's edge and transporting on the sandy beach.
*We recommend that the loading direction be towards the rear of the boat, with the handle facing the handle, but when carrying the load in the opposite direction, be careful not to damage the handle due to excessive load or to prevent the ride plate at the rear of the boat from hitting the ground. please.
*Watercraft products are not included.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Compatible models] KAWASAKI
ULTRA 310LX/LX-S(2022-)

For ULTRA series other than the above, "J2606-0040" is the compatible product.

● Kawasaki JETSKI genuine hull cover
●Protects your precious hull from UV rays and dirt.
●Ventilation function on both sides allows air to flow easily and prevents stuffiness.
●This product is not completely waterproof.
*Image (actual shape may differ due to use of images of other models)