Collection: bestseller

Escudo

[Compatible models] TD54W/94W, TDA/TDB4W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
There is a bumper cut about 5cm inside the license plate.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

●Series: CONCORD
●Pitch size: 16/21
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X260 / RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/21
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXT is260 / RXT-X260 / RXT as260 / RXT260 Stock engine (normal boat)
GTX LTD is 260 / GTX LTD is255 stock engine (normal boat)
RXP-X260 / RXP-X255(09-) Stock engine (normal boat)
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Every Wagon

[Compatible model] DA52W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction force] A
[Ball mount] Dedicated ball mount
[Installation difficulty]☆
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB32/31W JA22W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-3
[Installation difficulty]☆

*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible models] JA11/71V/JB31V/SJ30V

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-3
[Installation difficulty]☆

*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo *S edition Helly Hansen specification NG

[Compatible models] TA/TD/52/02W, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
S edition Helly Hansen specification NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo *S edition Helly Hansen specification NG

[Compatible models] TA/TD/52/02W, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
S edition Helly Hansen specification NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

[Compatible models]
RXT is260 / RXT-X260 / RXT as260 / RXT260 Stock (normal boat) Limited engine recommended
GTX LTD is 260 / GTX LTD is255 Stock (normal boat) Limited engine recommended
RXP-X260 / RXP-X255(09-) Stock (normal boat) Limited engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Stock (normal boat) Limited engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

Although you cannot expect to increase the maximum speed by installing it, you will get explosive power in the low and medium speed range that is incomparable to the genuine impeller.

■Leading peller: 4 blades
■Main propeller: 4 blades

【Guidance】
*Please use SOLAS impeller tool (WR012L) or genuine impeller tool (529035956).

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

●Series: CONCORD
●Pitch size: 15/20
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X260 / RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

●Series: CONCORD
●Pitch size: 14/19
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
● RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
● GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
● RXP-X260 / RXP-X255 (09-) Limited engine/modified engine recommended
● RXT215 (09-)/ WAKEPRO215 (09-)/ GTX215 (10-) Limited engine/modified engine recommended
● GTR215 stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Kit contents]

2 steel banks for SOREX, 4 mounting brackets ●Drilling is required for installation.

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Payment] Advance transfer/card payment only

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

●Series: CONCORD
●Pitch size: 13/18
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●SOLAS stainless steel wear ring 159mm (SRZ/SRX)
●Higher strength and durability than normal wear rings.

■BOX size: 463 x 252 x 385mm (approx. 37L)
■FRP
■Accessories: Mounting bolt (stainless steel), key

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

This is a relay kit for both 12V and 24V that can respond to problems with the towing vehicle's lights when connecting a trailer.

*We may not be able to respond depending on the type of towed vehicle or the condition.

【please note】
・This product does not come with connection terminals or extension wiring. Please prepare connection terminals, wiring, etc. separately.
- When extending the wiring, be sure to use a wire that is 0.75 square millimeters or larger.

●Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.

*Dimensions of part A in the image are 60mm type.
(A type with dimension A of 20 mm (product number SRX-121-01) is also available.)

●Foldable, large diameter hole.

■Wheel size: 8 inches (20.3cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 679kg
■Stroke: mm

●Steel slide retractable slope rail. When not in use, it can be easily stored inside the bank.

●Loading and unloading of PWC is possible without submerging the trailer in water. It can reduce corrosion of trailer tail lights, etc., and damage to undercarriage parts, such as hubs.

■Rail height 2,200mm, width 410mm
■Maximum load 500kg
*It may not be possible to install depending on the vehicle model.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

A storage box that can hold portable cans and small items.

■Box size: width 550 x depth 265 x height 220mm
■U bolt for installation: 78x65mm

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Product information]
●Cannot be bundled...To prevent scratches and damage, items will only be shipped individually. "Combined packaging (combined packaging)" with other products is not possible ●Directly shipped products...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (combined packaging)" is not possible ●Payment method limitations...Bank transfer/credit card only ( (cash on delivery not possible)

●Large storage space at the front of the trailer that can store wetsuits, life jackets, etc.

(ZERO500 / S50 exclusive option)

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Product information]
●Cannot be bundled...To prevent scratches and damage, items will only be shipped individually. "Combined packaging (bundling)" with other products is not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

13 inch tire/wheel/bracket set

[Required information when ordering]
Please be sure to fill in the following information in the request/remarks column.

●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

【please note】
*Please be sure to check the reply email as the shipping fee may be corrected depending on the delivery area.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information). *Shipping charges will be incurred for large items.

A cargo frame that can be easily DIYed into a country-style cargo trailer.

*Drilling into the loading platform is required for installation.

"set content"
Only 4 pillars
*Wood (1x4) and mounting bolts are not included. You can purchase it at home centers, etc.

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can also be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed to SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed due to the special bow stop.

■Stainless steel■Included: Mounting bolts (size: Φ10x47x100mm) and 2 sets of nuts

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

A set of protector and dust cover.
The bearing protector can be installed without removing the dust cap.
Grease can be filled from the grease nipple to the bearing inside the hub to protect the bearing.

●Sold in units of 1 piece.
[Size] Hub fitting outer diameter φ50.4mm

●Quantity: Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.
*Dimensions of part A in the image are 20mm type. (A type with dimension A of 60mm (product number SRX-121-02) is also available.)

10 inch tire/wheel/bracket set

[Required information when ordering]
Please be sure to fill in the following information in the request/remarks column.

●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

【please note】
*Please be sure to check the reply email as the shipping fee may be corrected depending on the delivery area.
*As this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

●For 193SL model (~2016*).
*Not compatible with models from 2017 onwards.

[Product information]
●Cannot be bundled...To prevent scratches and damage, items will only be shipped individually. "Combined packaging (bundling)" with other products is not possible.

galvanized

PCD114.3 5 holes

*There are some irregularities in the galva painting process.
Due to the large size of the item, shipping charges will be incurred.

Galvanized PCD114.3 5 holes

*There are some irregularities in the galva painting process.

[Product information]
To prevent scratches and damage, "combined packaging" (combined packaging) with other products is not possible.

Due to the large size of the item, shipping charges will be incurred.

When parking the trailer, make sure the trailer is kept level.
Trailer
Convenient for driving and moving. Double tires provide stability.
.

●Compatible with 10 inches ●Set includes bracket, tire, and wheel.

[Information required when ordering]
Please be sure to fill in the following information in the request/remarks section.

●Trailer model name
● Trailer year
●Stamp number (the number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←

【please note】
*Freight charges will be adjusted depending on the delivery area, so please be sure to check the reply email.
.

[Shipping Information]
Cannot be bundled...Cannot be bundled with other products to prevent scratches or damage.
You will be charged [shipping cost x delivery time].

●A necessary grease gun for injecting grease from the grease nipple of the bearing protector.

A set of 12-inch bracket, tires, and wheels.

[Request when ordering]-
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: [Oka] ~ [Oka] ←, [] is Oka/Country *As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

*We cannot accept delivery to private residences as this is a limited delivery item specified by a corporation/trade name (work place, etc.). *
Currently, we are unable to reflect the regular shipping charges when placing an order.
Therefore, please note that we will correct the specified shipping fee and provide new information.

●Hokkaido ¥18,700
●Tohoku ¥10,450
●Kanto/Shinetsu ¥9,900
●Hokuriku/Chubu/Kansai ¥9,900
●Chugoku/Shikoku ¥8,800
●Kyushu ¥9,900
*For Okinawa and remote islands belonging to each prefecture, we will provide a quote on a case-by-case basis, so please let us know.

●This is a boat platform that is ideal for maintenance and display of PWCs, boats, etc.
●Height can be adjusted to match the trailer loading platform.
●Equipped with locking swivel casters (2 on each side) for easy movement.
●The surface of the frame is galvanized (hot dip galvanized) and has excellent corrosion resistance.
*The bank part is made of wood*

[Notes when ordering]
*Since this is a made-to-order item, we cannot accept cancellations or changes after ordering.
*As this is a limited-edition product for corporations, we cannot accept delivery to private residences.

[Product specifications]
-Total length x height x width: 1,830 x 430 x 690mm
-Fixed casters x 2, flexible casters (with stopper) x 2

[Product information]
●Cannot be bundled...To prevent scratches and damage, "combined packaging (combining)" with other products is not possible.
●No returns or exchanges...Due to the characteristics of the product, we cannot accept returns or exchanges after shipping.
●Directly shipped items...Due to their large size, they will be shipped directly from the manufacturer.
●Items with designated shipping charges...Please check the shipping instructions.
●Cash on delivery payment not possible

●Foldable type.

■Wheel size: 6 inches (15.2cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 453kg
■Stroke: mm

●Dust cover only
●Prevents dirt, mud, etc. from entering the bearing protector.

●Sold in units of one.

●Compatible with 12 inches.
●A set of brackets, tires, and wheels.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・The shipping fee is for 1 set.

Protector only.
●A bearing protector that allows you to fill the hub with grease from the grease nipple without removing the dust cap.

●Marine trailers are often submerged in seawater, etc. with their hubs, so constant maintenance such as replenishing grease is required to protect the bearings. This protector is very convenient.

■Material: Stainless steel
■Applicable hub cap size: 50.8mm

Water-resistant grease that is effective against oxidation and seawater.

●Series: CONCORD
●Pitch size: 11/19
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Stock engine of SEA-DOO WAKE155 (2008-2018) (normal boat)
SEA-DOO GTX155 (2002-2009) stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 13/21
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[This is a made-to-order product].

●1 set left and right
●Improves trailer running stability and reduces impact on cargo by absorbing shock and vibration using hydraulic pressure.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]