Collection: bestseller

Protector only.
●A bearing protector that allows you to fill the hub with grease from the grease nipple without removing the dust cap.

●Marine trailers are often submerged in seawater, etc. with their hubs, so constant maintenance such as replenishing grease is required to protect the bearings. This protector is very convenient.

■Material: Stainless steel
■Applicable hub cap size: 50.8mm

Water-resistant grease that is effective against oxidation and seawater.

●Series: CONCORD
●Pitch size: 11/19
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Stock engine of SEA-DOO WAKE155 (2008-2018) (normal boat)
SEA-DOO GTX155 (2002-2009) stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 13/21
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[This is a made-to-order product].

●1 set left and right
●Improves trailer running stability and reduces impact on cargo by absorbing shock and vibration using hydraulic pressure.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

●SOLAS stainless steel wear ring 155mm (SR)
●Higher strength and durability than normal wear rings.

●Series: CONCORD
●Pitch size: 12/20
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/18
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016) stock engine (normal boat)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Adaptation]
YAMAHA
For YS-DF
For YV-CD

■Material: Aluminum

[Compatible models]
YAMAHA
YS-CD
YS-TP

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

[Applicable] For SEA-DOO pump diameter 159mm pump (for 260/255/215 horsepower)

BRP OEM part number: 267000372

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] SEA-DOO
4-stroke / 2-stroke (580 650 720 800 951 engine)

●Genuine part number (OEM): 278003012 etc.

●SGS starter relay
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 2018 and later models, 300 and SPARK
(OEM part number: 420666142)

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engines * Genuine part number (OEM): 420931130

●SGS Aftermarket PTO Gasket●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

For SEA-DOO 4-stroke 1503 engine
●Genuine product number (OEM): 420950771

●SGS cylinder head gasket
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

Available in 2 colors

For SEA-DOO 4-stroke 1503 engine
●Genuine part number (OEM): 420892735

●SGS piston ASSY (piston & piston ring)
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

[Compatible models]
KAWASAKI Kawasaki 440/550

Straight-line stability at high speeds is significantly improved.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

[Compatible models]
KAWASAKI Kawasaki SX-R1500

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

[Compatible models] KAWASAKI ULTRA series (250 / 260)
ULTRA250X
ULTRA260X/ULTRA260LX
Genuine post exchangeable handle mount compatible with Kawasaki ULTRA250/260.
I remade it by tapering it from the bottom to the center. Easy to install, just replace the normal post.
Not only is it easier to operate, but it also makes the area around the handle look cool.

SE-027013 (Suitable for handlebars of common thickness)
SE-027013F (suitable for thick fat bars)
SE-027013BK (Suitable for handlebars of common thickness)
SE-027013BK-F (Suitable for thick fat bars)

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

KAWASAKI SX-R 1500 4 stroke

NEW Venturi Gate for SX-R 1500

[Applicable model] For Kawasaki 800 X-2 (for racing)

●For racing (race specification)
Height is 50mm lower than normal and can be adjusted backwards within a range of 15-25mm.