Collection: merchandise

360° stretch neoprene JETLITE foam is the lightest and most flexible foam. It has more air bubbles than conventional products, making it more flexible and movable, and is also lighter.

YKK lock zipper adopted

*This is a sports vest that can be used for wakeboarding, SUP, etc.
*JCI small special vessel inspection certification is not possible.

■Applicable waist circumference M:85-95cm
L:90-100cm
XL:95-105cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

This is ZAHRA KELL's signature model.
Stretch neoprene accommodates every movement of the rider.
This neoprene vest is flexible and soft to the touch, making it the perfect piece for active scenes.
The liner is made of fire fur material, which is perfect for women as it provides excellent heat retention.
The front zipper makes it easy to put on and take off.
This is a top-quality vest that is lightweight and flexible.

■ Chest size guide

M(10):85-90cm
L(12):90-95cm

*JCI small special vessel inspection certification not available*

Wakeboarding, Wakesurfing, Kiteboarding, Surfing
Bodyboarding, SUP, Paddleboarding, Flyboarding, Snorkeling, Trekking, Kayaking, Canoeing, Marine Sports, Marine Activities, Banana Boat, Windsurfing, WAKEBOARD SURF WATERTOY
Rubber boat ZUPBOARD sports vest Impact vest Neo vest
Wetsuits

half finger gloves

PVC molded protectors are attached to the tops of the fingers and the back of the hands to reduce the impact burden, and also improve the movement of the fingers.
Lycra fabric is used on the joints and sides of the fingers to make them smooth.
These gloves are highly functional and durable, with Clarino (durable synthetic leather) on the front of the palm and double-reinforced Clarino with double stitching in the friction area with the grip.

■Size chart (hand width/total length)
(M)21.5cm/21.5cm
(L) 22.0cm/22.0cm
(XL)23.0cm/23.0cm

*Please note that this is our actual size when laid flat, so please allow slight errors. (US standard size)

This is a multi-use waterproof backpack made by Dry Case in the United States.
3 Rolling system with extremely high performance, even in bad weather such as water spray, mud, sea breeze, rain and fog
It firmly protects the clothes and equipment you put inside.

In addition, we use environmentally friendly materials that are resistant to tears and sharpness.
Even if it gets dirty, you can easily remove it by wiping it with a wet cloth.

●Size: 69 x 40 x gusset 18cm (capacity 30L)

The size is large enough to hold bath towels, footwear, and other small items.

Stable shoulder straps and waist belt allow you to use both hands.
It also comes with a sturdy rubber strap, so you can hold it in your hand.
It also has plenty of storage specifications, including a zippered mesh pocket on the front and side pockets on the left and right.
It also provides full support for your back or lower back.

This cloth mask uses 100% cotton for the outer material and 100% quick-drying polyester fabric for the lining.
There is a pocket inside the main body that can be used to insert non-woven fabrics, gauze, etc.

●Masks do not completely prevent infection (virus invasion).
●Non-medical use, non-dust-proof/gas-proof use

【Product Specifications】
■Set of 2 ■Outer fabric: 100% cotton
■Lining fabric: 100% polyester
■Ear hook part: 100% cotton
■Size: L (Men's) W22cm x H15cm (mask part)
*This is the size listed in the catalog and may differ from the actual size.

Based on the impressions of our professional riders, we thoroughly analyzed the rider's movements and repeatedly tested the optimal cut pattern. This is the ideal wetsuit that effectively uses highly elastic materials. You will surely be able to experience the highest quality and high potential of UNLIMITED.
The side cuts give the body shape a clean look and also have an excellent design.

-UNLIMITED RUSH-
Aiming for higher performance, the design is focused on specifications that maximize the power, speed, and stability of PWCs, under the supervision of UNLIMITED's exclusive professional riders. The ultimate wear that allows riders to embody a smart look that is in line with the times.

【Features】
・Shoulder Velcro: The Velcro on the left shoulder of the long john allows for smooth putting on and taking off. ・Stabilizing pad: The pad on the knee area helps improve grip while riding. ・2.5mm flex neoprene: The new material is an evolution of the conventional fabric and has the highest level of texture and elasticity.
- Ink pad: Flexible and lightweight, with improved grip - Ankle zipper: Velcro tape with zipper for easy on and off to protect the slider

[Freely mix and match] Separately sold set-up product: EXPEDITION COAT - Marine coat - (product number UWC2240BK)
・RUSH WET JACKET (product number UWA2230BK)
・RUSH WET PANTS (Product number UWP2220)
Can be worn in combination with the above items.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

For ULNIMITED full billet sponsons (UL53200)

aluminum billet

Contents: 4 pieces

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.

[Support] M8 flat head screw

[Quantity] 1 piece
*Usually countersunk screws require counterbore processing on the mating material,
By using rosette washers, you can use countersunk screws without machining.

Be stylish with your favorite color! Also good as a design element!
You can also dress it up by replacing the bolts that secure the sponsons.

[Compatible models]
SEA-DOO 4-stroke ALL model (*excluding SPARK)

*Please use the genuine O-ring when using.

The oil cap can be removed without special tools when changing the oil.
It's very stylish and makes the engine room stand out.

UL53001SL Silver
UL53001OR Orange
UL53001RD Red
UL53001YL Yellow

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

-Newly released deck mat for SEADOO from UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI] ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

●For STX160, only some colors (5 colors in total) are sold.
(Black x Gray, Black x Green, Gray x Black, Black x White, White x Black)

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

●For STX160, only some colors (5 colors in total) are sold.
(Black x Gray, Black x Green, Gray x Black, Black x White, White x Black)

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI] NEX SX-R (4ST)

- Deck mat for Kawasaki NEX SX-R (4ST) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] SEADOO
GTX-LTD / GTX (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] SEADOO RXT-X / Wako Pro (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki ULTRA 310LX-S (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA 310LX (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA LX series (2009-2021)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

[Compatible models] YAMAHA Superjet (2021)

Made of aluminum billet

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Compatible models] KAWASAKI Kawasaki
ULTRA300X / ULTRA300LX / ULTRA300SE
ULTRA310LX (-'21) / ULTRA310X / ULTRA310SE

Used to relocate the cruise control button when replacing the accelerator lever.
Available in 4 colors, you can color coordinate the throttle lever and hull.

When replacing the throttle lever
●When trying to use the cruise control function at the same time...
You must replace the stock steering mount with an aftermarket steering mount and use a relocation plate.

●By using this case together
[Using the cruise control function with the original steering mount] Furthermore
[Replacing the throttle lever without losing the position tilt function] is now possible.

[Compatible models] SEA-DOO iTC/iBR equipped model
Lever billet case for electronic throttle (iTC) and I-brake (iBR) systems

[UL36006] SEA-DOO mode select system case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Applicable models] SEA-DOO iTC/iBR equipped model Lever billet case for electronic throttle (iTC) and I brake (iBR) system

[UL36005] Case for SEA-DOO mode select system

Left side: Sports mode/Eco mode VTS button case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC equipped model Lever billet case for electronic throttle (iTC) system

[UL36004] Right side: Electronic throttle (iTC) lever case

Move the iTC and iBR sensors to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iBR equipped model
Lever billet case for I-brake (iBR) system

[UL36003] Left side: I brake (iBR) lever case

Move the iBR sensor to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

[Compatible models] KAWASAKI ULTRA series / YAMAHA GP1800
■Handlebar clamp: Compatible with standard handlebar diameter 22.2mm

●KAWASAKI ULTRA310X /310R /310LX (-'21) /310X SE /300X /300LX /260X /260LX /250X /LX
●YAMAHA GP1800 / VX series ('15-)

■Material: Made of billet aluminum

This adapter allows you to replace the handlebar while using the genuine handlebar mount.
To replace the handlebar of a model that uses a V-shaped handlebar mount,
It used to be necessary to replace the steering mount, but with this product, you can now replace the handlebar!

For the ULTRA series, we use the genuine OEM mount as is, so
The steering wheel tilt function can also be used as is.

SEA-DOO
Models equipped with electronic throttle (iTC) and I-brake (IBR) systems from 2009 onwards

[There may be additional parts required depending on the compatibility details and model. Please check the product description]

[Compatibility details]
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[About required parts]
*S3 Hull...The angle adjustment range of the normal steering wheel tilt function is limited.
*T3 Hull, RXP-X260/300, 2015 and later models...Top plate [UL35100TP-2] sold separately is required.
*SPARK…Removal of stainless steel DESS post holder plate requires SPARK dedicated top plate [UL35100TP-SP] sold separately.

New design and low price!
10cm lower than the normal position, allowing riding in a low position.
An offset handlebar clamp [UL062] is installed.
Other handlebar clamps from the same company can be attached.
*Depending on the model, the hull and handle may interfere.

【Guidance】
●Recommended for use with the company's billet switch case set [UL36000] and ITC/IBR billet lever [UL33002] ●It is also possible to process and use the X series genuine switch case.
●The handlebar of the SEA-DOO model is now replaceable.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

Made from polished aluminum, the length of the wire and the weight of the throttle can be adjusted.
The grip width at idling remains the same, but the pulling distance has been made longer than previous throttle levers.
By doing so, it can now be used on models with long accelerator strokes such as SEADOO Hydro.

[Disclaimer]
Specifications such as coloring and texture may change depending on arrival and shipping time.