Collection: merchandise

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

[Compatible models] KAWASAKI ULTRA series / YAMAHA GP1800
■Handlebar clamp: Compatible with standard handlebar diameter 22.2mm

●KAWASAKI ULTRA310X /310R /310LX (-'21) /310X SE /300X /300LX /260X /260LX /250X /LX
●YAMAHA GP1800 / VX series ('15-)

■Material: Made of billet aluminum

This adapter allows you to replace the handlebar while using the genuine handlebar mount.
To replace the handlebar of a model that uses a V-shaped handlebar mount,
It used to be necessary to replace the steering mount, but with this product, you can now replace the handlebar!

For the ULTRA series, we use the genuine OEM mount as is, so
The steering wheel tilt function can also be used as is.

SEA-DOO
Models equipped with electronic throttle (iTC) and I-brake (IBR) systems from 2009 onwards

[There may be additional parts required depending on the compatibility details and model. Please check the product description]

[Compatibility details]
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[About required parts]
*S3 Hull...The angle adjustment range of the normal steering wheel tilt function is limited.
*T3 Hull, RXP-X260/300, 2015 and later models...Top plate [UL35100TP-2] sold separately is required.
*SPARK…Removal of stainless steel DESS post holder plate requires SPARK dedicated top plate [UL35100TP-SP] sold separately.

New design and low price!
10cm lower than the normal position, allowing riding in a low position.
An offset handlebar clamp [UL062] is installed.
Other handlebar clamps from the same company can be attached.
*Depending on the model, the hull and handle may interfere.

【Guidance】
●Recommended for use with the company's billet switch case set [UL36000] and ITC/IBR billet lever [UL33002] ●It is also possible to process and use the X series genuine switch case.
●The handlebar of the SEA-DOO model is now replaceable.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

Made from polished aluminum, the length of the wire and the weight of the throttle can be adjusted.
The grip width at idling remains the same, but the pulling distance has been made longer than previous throttle levers.
By doing so, it can now be used on models with long accelerator strokes such as SEADOO Hydro.

[Disclaimer]
Specifications such as coloring and texture may change depending on arrival and shipping time.

YAMAHA genuine handlebar (external grip installed)

[Product name] UNLIMITED OEM end cap [Material] Aluminum [Quantity] 2 pieces 1 set

Used when replacing the grip with an aftermarket item on a YAHAMA boat while keeping the original handle.
Effective as a grip retainer.

UL32101BK Black
UL32101BL Blue
UL32101RD Red
UL32101SL Silver

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Compatible] Can be installed on runabout models

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 850mm
■Handlebar clamp area: 130mm
■Grip end position: 65mm

Minimize clamping area, grip, switch case,
Handlebar with maximum throttle lever aria.
Bending tie compatible with recent models.
The shape that hangs toward the bar end creates a riding form that naturally closes the sides when cornering.

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

[Compatible models] KAWASAKI
1500SX-R New SX-R
800SX-R
800X-2
STX900

Aluminum billet exhaust cover
Not only the 1500SX-R but also Kawasaki's stand-up 800 series can be installed.
Contrast cuts with a wide variety of colors,
This contributes to weight reduction while creating a luxurious rear view.

UL14020BK Black
UL14020SL Silver
UL14020GR Green
UL14020GM Gunmetal

[Compatible models] KAWASAKI SXT series ULTRA series
ULTRA310X/310LX/310R/310SE
ULTRA300X / 300LX /
ULTRA260X/260LX
ULTRA250X
ULTRA LX
STX12F / STX15F / STX 160X / 160LX

*For the SX-R series and X-2 series, the following products are compatible.
*Product number: UL010 / UL14020

3-piece construction: base plate, spacer, and face disc.
Anodized exhaust cover. Creates a stylish rear view.
Machined aluminum specification with excellent strength and corrosion resistance.
A dress-up item with a wide variety of colors.

[Kit contents]
Base plate x 1,
Spacer x 1,
Face disk x 1,
Mounting bolts: M6-10 (button) x 3,
M6-28 (cap) x 3

[Applicable models] All KAWASAKI 4-stroke models

Performance dress-up parts with high quality strength and precision!
Weight reduction has also been achieved by simplifying the air suction valve.

*In order to install this part to Kawasaki's SC model, it is necessary to remove and install the head pipe.

[Application]
Used in KAWASAKI electrical box
Replacement parts for plastic joints.

■Quantity: 1 piece
■Billet specifications

There is no need to worry about damage due to deterioration due to years of use, and the visual appearance is also dressed up!

[Disclaimer]
*O-rings and grommets are not included with this product.

UL046SL Silver
UL046GM Gunmetal

[Compatible models] KAWASAKI Kawasaki
650/750/800/900/1100 engine

The inside of the engine room stands out.
*Please use the genuine O-ring when installing.

UL044SL Silver
UL044BK Black
UL044GR Green
UL044RD Red
UL044BL Blue

[Applicable models] KAWASAKI 4-stroke

*When installing, please use the genuine O-ring (92055-1295).

Make your personal watercraft's genuine cam cover stylish! Dress up your engine room.

[Compatibility] Can be installed on runabout models [Type] Handle diameter 22.4mm standard [Included] Handlebar pad included (pad length: 220mm)

●Wide handlebars allow for natural and aggressive riding.

●The wide handle makes it easy to adjust (cut) the handle to your desired length.

●The racing handlebar is made from aircraft materials and coated with carbon fiber, giving it a spartan and stylish look.

●The angle and length are based on the conventional racing bar, but there is a printed scale that allows you to reliably set the mount position, making it convenient for setting.

●The straight type is the world's first innovative handlebar exclusively for watercraft, with no SWEEP handle squeezed at all. Used and recommended by top riders around the world. The feature is that when the center of gravity is low, there is no interference between the steering wheel and the flank when cornering, allowing you to maintain a more forward-leaning posture.

■Compatible with: 500/800 bilge pump

■Material: Aluminum ■Hose piercing port: Ф19mm
■Exit hole: Ф15mm
■Mounting hole: Ф26mm

A straight type that can be installed flat on the hull.

UL013SL Silver
UL013BK Black
UL013GR Green
UL013BL Blue
UL013PU Purple

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL009SL Silver
UL009BK Black
UL009GR Green
UL009BL Blue
UL009OR Orange
UL009RD Red

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

Compatible with PWC 3 manufacturers
SEADOO <2015 and later models> Excluding SPARK Kawasaki, YAMAHA

The float is located on the life vest side to prevent the weight of the cord from swinging around.
When new, it will continue to remain buoyant even if left in a tank filled with calm water for a week.

■Size: Total length approx. 40cm, when extended approx. 1m30cm

【please】
*Before use, please check the cord for cracks and the crimped parts at any time.
*SD key registration is required, so please check with the dealer you purchased the hull from.
*This product is not compatible with the SD SPARK series.

*For Kawasaki and YAMAHA models, please select UFL2101, which is compatible with two manufacturers.

This semi-long coat is made of neoprene, which has excellent elasticity and heat retention.
Functionality is also emphasized, with a center vent that does not restrict movement when seated.
The size can be adjusted around the wrist using the wrist closure, making the accelerator and handlebar operation smooth.
The left and right pockets are equipped with metal zippers and drain holes, making them very convenient.

■ Suitable height
M: -170cm
L: -175cm
XL: -180cm

■ Suitable height and actual size (height/chest circumference/hem width/sleeve length/length)
M: -170cm/110cm/55cm/51cm/83cm
L: -175cm/114cm/58cm/53cm/91cm
XL:-180cm/124cm/64cm/58cm/98cm

Please allow for some error as measurements are taken by our staff.

A convenient multi-type marine coat that can be used both on the water and on the slopes.
It is functional with side vents that do not restrict movement when sitting on the seat.
The wrist length can be adjusted with a wrist closure, and the large pockets on both sides are very convenient.

The size is generous so you can wear it comfortably, and the wetsuit material makes it easy to clean.
Good not only for marine sports but also for watching sports on days when the weather is a concern!

■Applicable height and actual size (height/chest measurement/hem width/sleeve length/length)

M: -170cm/130cm/63cm/45cm/69cm
L: -180cm/138cm/68cm/48cm/77cm
XL: -185cm/144cm/72cm/51cm/85cm

■The photographed model (height 182cm) is wearing size L.

Personal Watercraft PWC Watercraft Boat
Watercraft Jet Ski Marine Jet Marine Coat Wetsuit Jacket Men's Black Cold Weather Outdoor Outerwear Wakeboard Marine Sports

This is a cost-effective model that is suitable for all types of marine sports during the winter season.

A multi-purpose dry suit with a simple back zipper.

■ Adoption of new material "Breath Wall" Water repellency and waterproofness are further improved!
The outer fabric prevents water from entering, while the inner fabric wicks moisture away from sweat, providing the highest level of comfort. Furthermore, it is lightweight while maintaining durability.

■ Back zipper design on the front of the upper body for a smart look The arms can be moved without stress and do not interfere with active movement.
The fashionability typical of board wear is also popular.

■ The neck and wrists are made of chloroprene to reduce tightness The neck and wrists are made of the same chloroprene material as wetsuits, providing durability and a soft feel.
You can adjust the cut with scissors to suit your body shape.

■The feet are equipped with integrated socks The feet are equipped with sock-type "super latex" as standard.
Since it is integrated with the body, it prevents water from seeping in from the outside, and wearing socks etc. will improve its cold weather performance.
It is very convenient because you can adjust it according to your riding style and seasonal area.

【accessories】
*Suspenders (prevents baggy inseam and supports intense action)
*Repair sticker included (iron-on specification)
*Storage bag (long and narrow design that can be stored without folding the zipper)

■Applicable height:
M size: Height 160-170cm
L size: Height 170-180cm
XL size: height 175-185cm

■MATERIAL
New material “Breath Wall”, YKK Aqua Seal, Super Latex, Chloroprene Seal

[Notes on dry suits]
The material itself does not retain heat, so innerwear must be adjusted according to the outside and water temperatures.
If you don't need heat retention, we recommend wearing absorbent innerwear to prevent sweat.

The nylon lining is treated with a special coating, so if the inner fabric is scratched by hard fabrics like denim or metal fittings like key chains, the waterproof function may be reduced, so do not wear innerwear. Please be careful sometimes.
Also, since the material is nylon, it is sensitive to heat, so please avoid bonfires, etc.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

Personal watercraft (PWC)
water motorcycle water bike
Kawasaki JETSKI Jet Ski
YAMAHA Marine Jet
SEADOO Yacht Boat Kayak Canoe

[Compatible models]
SEA-DOO WAKE (2011-2017)

*WAKE Pro (2010-2017) product number: 295100720
*WAKE pro (2018) product number: 295100697

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO
GTR215 (2012-2017)
GTR230/GTR-X230(2017-2019)
*GTR-X product number: 295100721 ​​(280000543)

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTI / GTI SE / GTI Limited

GTI130 / GTI SE130 / 155 / GTS
*All compatible with 2011 models and later

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO
RXP-X (2012-2017)
GTR-X

280000543

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models]
SEA-DOO WAKE PRO (2010-2017)
*WAKE (2011-2017) product number: 295100724
*WAKE Pro (2018) product number: 295100697

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTX/RXT series (2010-2017) *Model without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*GTX series with iS (2017), GTX-S product number: 295100718
*GTX series with iS (2009-2016) product number: 280000460
*RXT-Xas (with suspension) product number: 280000586

●SEA-DOO genuine PWC cover.
●Designed for a perfect fit and made of fabric with excellent UV resistance.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*
-------------------------------------------------- ------------------------
●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc.
Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTX *Model with IS (suspension)
GTX S155(2012-2016)
GTX Limited S (2017)

*For GTX series without iS, product number: 280000472
*GTX Limited iS (2009-2016) product number: 280000460

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEADOO SPARK for 3 people

*Previously, the shape of the product differed depending on whether or not the accessory part "adjustable riser" was installed, but now it is the same for all types.
Please note that there may be cases where the item comes with tabs.
295100789 (old product number: 280000688 / 295100707)

Genuine SEADOO PWC cover. Strapless design for easy installation.
The fabric is dyed to provide added UV protection.
Other features include a patented air release vent system for trailer transport,
It comes with an interior pouch for storing the cover when not in use.

[Information regarding genuine products]
※This is a made-to-order product※
*This product is a genuine product and cannot be cancelled or returned after ordering*
-----------------------------------------------------------------------------
●When selecting a product, please be sure to check the following items before placing your order.
Please carefully check 1. the manufacturer, 2. the model name (common name), 3. the year of manufacture, etc. before purchasing.
●The displayed price and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers and price changes. In that case, we will contact you before shipping. Please note in advance.

[Compatible models] SEADOO SPARK for two-seaters *Previously, the shape differed depending on whether or not the accessory part "adjustable riser" was installed, but now it is the same for all types.
*Therefore, please be aware that there may be cases where the item comes with tabs.
295100671 / 295100706 / 295100912

Genuine SEADOO PWC cover. Strapless design for easy installation.
The fabric is dyed to provide added UV protection.
Other features include a patented Air Release Vent System for trailer transport and an interior pouch to store the cover when not in use.

[Information regarding genuine products]
※This is a made-to-order product※
*This product is a genuine product and cannot be cancelled or returned after ordering*

●When selecting a product, please be sure to check the following items before placing your order.
Please carefully check 1. the manufacturer, 2. the model name (common name), 3. the year of manufacture, etc. before purchasing.
●The displayed price and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers and price changes. In that case, we will contact you before shipping. Please note in advance.

Compatible with SEA/DOO DESS system (programming required).
As this is a genuine product, the price may change without prior notice.

■Material: Brass
JL003-6: 1/8×1/8 pulse 90° (threaded part 10mm: P0.9: outer diameter 7mm)

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IWF-22 / BR7HS
[2] Compatible with IWF-24 / BR8HS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IWF-22 / BR7HS
[2] Compatible with IWF-24 / BR8HS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IW-24 / BR7ES/8ES
[2] Compatible with IW-27 / BR9ES
[3] Compatible with IW-31 / BR9ES~10ES

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IU-24A / CR8EK
[2] Compatible with IU-27 / CR9EB/PMR9B

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible]
[1] Compatible with IU-24A / CR8EK
[2] Compatible with IU-27 / CR9EB/PMR9B

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Manufacturer part number/compatible model]
[1] IK-16 / ZFR-4F-11 compatible SEA-DOO DI
[2] IXU-24 / DCPR8E compatible SEA-DOO 4st (excluding SPARK) -
[3] Compatible with IKH-20 / LFR6A-11 YAMAHA SHO/FZR/FZS

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

[Adaptation]
A4025 KAWASAKI all models
A8025 YAMAHA
A2025 Universal
A4026 KAWASAKI 1200STX-R/800SXR 3 bolts

【remarks】
Those who only want duckbill rubber
→It is sold with product number: A2019.

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

[Adaptation]
A4025 KAWASAKI all models
A8025 YAMAHA
A2025 Universal
A4026 KAWASAKI 1200STX-R/800SXR 3 bolts

【remarks】
Those who only want duckbill rubber
→It is sold with product number: A2019.