Collection: merchandise

■Roller diameter (A): 75.6mm
■Width (B): 127.0mm
■Shaft diameter (C): 16.0mm

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

●It is even safer to hang a wire chain to prevent theft when storing the trailer.
●Hitch ball diameter: Compatible with 1 7/8", 2", 2 5/16".
●Equipped with a slide cover that protects the keyhole from dust.

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

[Product specifications]
■Flange dimensions: 350 x 604mm
■Drilling dimensions: 269 x 517mm
■Opening dimensions: 248 x 495mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 328 x 402mm
■Drilling dimensions: 245 x 312mm
■Opening dimensions: 216 x 290mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 280 x 381mm
■Drilling dimensions: 200×298mm
■Opening dimensions: 180×280mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

■This is a hose side fitting attached to the fuel tank side fitting.

*Please use with tank fitting (product number: 30018) sold separately.

■Compatibility: TOHATSU outboard motor 2-stroke 3/8” hose

■Fix to a hose with an inner diameter of 9.5mm using a clamp sold separately.

■Can be installed and removed with one touch on the tank side fitting.

■It is a fitting that is attached to the fuel tank.

*Please use with hose fitting (product number: 30019) sold separately.

■Compatibility: TOHATSU outboard motor 2-stroke 1/4”NPT

■Tank part screw size: 1/4 inch outer diameter 12.5mm

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 19mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

●The handle is symmetrically designed and can be attached to either side.
●The length can be adjusted to 15, 18, 20, and 23cm.
●Die-cast housing type that is resistant to corrosion.
●The drum can be switched between forward rotation, reverse rotation, and free rotation.
[Note] It cannot be used for vertical lifting.

■Material: [Shell] Aluminum, [Drive part] Steel
■Maximum towing load: 906kg / 2000LBS
■Strap length: 20FT (approx. 6m)
■Size: Width 140x Total length 270x Height 205mm
■Installation surface size: width 85x length 160mm
■Self weight: Approximately 5kg

●Stylish aluminum rod holder.

●Made by TACO, which has a reputation for its beautiful finish and sturdy construction.

●For light tackle such as spinning.

●Material: Aluminum

●Size: Width 295mmx Height 220mm

●Holder part inner diameter: 37φmm

*Screws for attaching the main unit are not included.

[Product specifications]
■Material: Nylon
■Size (when unfolded)
Height: approx. 162cm (rope tip to bottom of step)

●A simple ladder that can be secured by hooking a nylon rope onto a cleat.
●The width of the step is approximately 29cm, and the surface is engraved with a non-slip pattern.
●Can be stored compactly when not in use.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.

●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●This pump is designed to suppress the heat generated by the motor.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button. Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 12v, current: 3.5A, maximum pumping capacity: height 3.3m, lifting capacity: 75L (0m/min)

●Size: Base diameter 84φx Overall height 111x Discharge port diameter 28φmm

*[Note] Be sure to insert a 5A fuse (sold separately) between the pump and the power supply.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.
●This pump is designed to suppress the heat generated by the motor.
●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button.
Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 24v, current: 1.3A, maximum pumping capacity: height 4.2m, lifting capacity: 50L (0m/min)
●Size: Base diameter 84φx Overall height 111x Discharge port diameter 19φmm

【please note】
Be sure to insert a 2A fuse (sold separately) between the pump and the power supply.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.

●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●This pump is designed to suppress the heat generated by the motor.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button. Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 12v, current: 3.0A, maximum pumping capacity: height 4.2m, lifting capacity: 50L (0m/min)

●Size: Base diameter 84φx Overall height 111x Discharge port diameter 19φmm

*[Note] Be sure to insert a 4A fuse (sold separately) between the pump and the power supply.

●Made by ATTWOOD

●The patented X-Air impeller's performance forces air bubbles trapped under the hose and pump out of the piping, preventing seizures caused by the pump running dry.
●This manual bilge pump is the easiest to install and maintain.
●40% more protection against water ingress and electrolysis compared to the previous model TSUNAMI.
●You can use the mount as is with this model even with pumps from other companies.

【specification】
・T500 12V
・Maximum discharge/min: 18.2 liters ・Fuse used: 3Amp
・Hose diameter: 19mm (3/4 inch)
・Recommended boat length: ~18ft

[Product specifications]
■Material: Stainless steel
■Compatible with: Wire diameter 6-8mm chain

■Size (see image 2):
A:84mm B:15mm C:8mm D:36mm E:24mm

■Load capacity: 850kg
■Swiveling structure

Used instead of a shackle when connecting the anchor and chain.
Especially when using an anchor roller, etc., the anchor can be rolled up smoothly.
Prevents chains and ropes from twisting.

●This tank is JCI (Small Ship Inspection Institute) certified product.
●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 3 gallons / 11.3 liters
■Size: Length 360 x Width 270 x Height 235mm
■Air vent cap
■See-through type (no fuel gauge)

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

medium strength 222

●Contents: 50ml (liquid type)
●Recommended screw diameter: M12 or less
- Destruction/escape torque (N m): 6/4
●Temperature range (℃): -55 to 150
●Color: Purple

●A manual powder fire extinguisher for small vessels. Be sure to be equipped in case of a fire inside the ship.
●Equipped with a highly visible yellow ring-type safety plug.
Even if you hold the lever, you can easily release it and start extinguishing the fire immediately.

- Comes with a "good mark" that comes off as soon as you squeeze the lever when in use.
Fire extinguishers that have the "Good Mark" and horn "seal" removed are used and should be refilled immediately.
●Easy to use! It is extremely effective against all kinds of fires.

【Product Specifications】
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
■Model: CSP-3X
■Standard: Ministry of Land, Infrastructure, Transport and Tourism certified product
■Type approval number No. 4762
■Total weight: 2.2kg
■Height 380mm x Width 205mm x Depth 89mm
■Drug amount 1.0kg
■Applicable fires Ordinary, oil, and electrical fires
■Radiation time (20℃) 12 seconds
■Radiation distance (20℃) 3~5m
■Operating temperature range -20℃～+40℃
■Anti-rust/corrosion treatment Red/synthetic resin paint baking coating
■Hose 300mm
■Pressure test pressure value 1.2MPa

*Includes recycling fee.

●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: Length 590 x Width 300 x Height 235mm
■Air vent cap with gauge

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 3 gallons / 11.3 liters
■Size: Length 360 x Width 270 x Height 235mm
■Air vent cap
■See-through type (no fuel gauge)

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 155x length 24x height 37x rope opening width 31x mounting hole distance 123mm

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to the left and right to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 123x length 20x height 26x rope opening width 14x mounting hole distance 85mm

●By inserting the sturdy steel body into the attachment/detachment lever, the outboard motor is prevented from being stolen.

●Material: Corrosion-resistant reinforced steel
(The lock part is made of steel, so please use grease, etc. to prevent it from rusting.)

●With sponge to suppress vibration
-Comes with 2 keys

●Stainless steel bracket for fixing navigation lights to pipes, etc.

●Special bracket for navigation lights manufactured by Koito Seisakusho
●For 25mm diameter pipe
●Material: Stainless steel (SUS304)

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●A trailer jack made of aluminum with a novel design.

●Wide single wheel. Comes with wheel lock.

■Mounting frame: up to 76.2 x 101.6mm
■Material: Aluminum
■Maximum load: 725kg
■Stroke: 250mm
■Wheel diameter: 178mm

[120 size]

[Product specifications]
■Material: Stainless steel
■Size: width 340 x height 235 x depth 76mm
■Holder inner diameter: 42φ
...
■Mounting screws are not included.

●Pliers, knives, fishing tackle, etc. can be stored in the center of the frame, and lures can be stored in the small hole in the front.
●A resin cover is built into the inside that houses the rod to prevent it from being scratched, and there is a drainage hole on the bottom.

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size
Hinge part: 29 x 76mm
Key holder base: 41 x 29mm

-Hinge set with keys (2 included).
-Uses 316 stainless steel material that is resistant to rust and corrosion.

●The float type switch for the bilge pump is now equipped with a guard to prevent malfunction due to dirt, etc.

●When the water level is high, the float floats and conducts, and when the water level drops, it automatically disconnects.

●With lever for operation text

●Compatible with bilge pumps with DC12 to 32V and up to 20Amp.

-Base size 64x133mm, total height 73mm

[Product specifications]
■Type: Wall-mounted type
■Material:
Body: polypropylene
Fixings: stainless steel
■Size: Total length 305mm
■Holder inner diameter: 45φ

...
■Stainless steel fixture included

●Anemometer with built-in electronic compass and display functions for average wind speed, maximum wind speed, and temperature.
●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.
●Direction display supports angle display (0 to 360 degrees) and compass point display (north, south, east, and west).
●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.
- Comes with a strap that is convenient for hanging around the neck
●The main body has a screw hole for fixing it to a tripod, so it is possible to take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Built-in electronic compass, wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

●One set of mounting brackets (2 pieces) is required to install one rail.
Size: Height 20cm x Width 7cm

The 4FT rail has 5 rollers, allowing you to smoothly load and unload the boat.

●Size:
Total length 1,220mm
Width 70mm
Roller diameter: 63mm

●Loading weight: 543kg

*One set of separately sold "26450 mounting bracket (2 pieces)" is required to install one rail.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Uses a removable key type that is effective in preventing tampering. Prevents mischief and malfunction.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating to ensure reliable wiring!
●The ring sticker that indicates the switch position uses a luminescent label. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

■The MINI battery switch is ideal for outboard boats and boats equipped with small diesel engines.
■Battery switch that supplies two systems from two batteries. [Switch position] The following four positions are available.
1. Battery 1 → Connect/cut off the power to the two devices.
2. Battery 2 → Connect/cut off the power to the two devices.
3. Battery 1 + 2 → Connect/cut off the power to the two devices.
4. Shut off all batteries 1+2.

[Product use]
●Continuous withstand current: 300Amp
●Momentary withstand current: 1500Amp (2.5 seconds)
●Maximum voltage: 48V
●Size: 68.9x68.9mm
●Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●Highly conductive copper is used for the connection terminal, and the corrosion-resistant tin plating coating ensures reliable wiring!
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

[Product specifications]
■Material
Body: Aluminum
Roller: vinyl chloride
■Size: Width 140x Depth 69x Height 71mm

A roller that smoothes the movement of ropes and chains when raising and lowering the anchor, and also prevents damage to the hull.
It has rollers in the horizontal and vertical directions, so it can be raised and lowered stably and smoothly even if the rope swings from side to side.
Weather resistance has been strengthened by adding titanium to AC7A aluminum, which is resistant to corrosion and rust.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

When used, it eliminates the rear center of gravity when a single person is on a small boat, accelerates the transition to a planing state, and enables stable running.
This is an extension bar that can be attached to the throttle section of an outboard motor or electric motor when the handle is short and difficult to maneuver.

[Installation] Just place it over the grip and tighten the knob! No tools required. Easy to put on and take off.
*If the handle diameter is too small, please adjust it with the included rubber plate.

【Product details】
■Applicability: Ideal for Japanese boats, U-type boats, and fishing boats.
■Material:
→Body: Aluminum
→Other parts: Plastic
■Compatible with: Grip outer diameter: 36-54Φmm
■Telescopic 620-1020mm steplessly adjustable
■With curl cord for extension of kill switch

【please note】
The longer the handle, the worse the turning angle of the handle, so please be careful when maneuvering the boat.

Since it is intended for use with a low horsepower outboard motor, there is a risk of damage if used with a high horsepower outboard motor.
Avoid using outboard motors with more than 15 horsepower.

●Not only can it be used to defog glass windows, but it can also be used as a pinpoint heater for your hands and face.

●A louver is attached to the air outlet, allowing you to adjust the direction of the airflow from left to right, and the main unit can be rotated 180 degrees vertically.

●With cigarette lighter plug (cord length: approx. 1m)

●Size: Width approx. 195x Height approx. 100x Depth approx. 70mm

●DC 12V only/output 120W

●Air volume and temperature are about the same level as warm air (weak) from a portable hair dryer.

*[Note] ON/OFF switch is not included. Turn on/off by inserting and removing the plug.

●Anemometer with display function of wind speed, average wind speed, and maximum wind speed.

●It is a simple and easy-to-operate model with only the most frequently used wind speed display for Wind Mate 200 (product number: 24065) and Sky Mate.

●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.

●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.

- Comes with a strap that is convenient for hanging around the neck

●The main body has a screw hole for fixing it to a tripod, so you can take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

●A battery switch that supplies two systems from two batteries; the switch position is from battery 1 to connect/cut off power to two devices. Battery 2 → Connect/cut off power to two devices. Battery 1+2 → Connect/cut off power to two devices. All batteries 1+2 are cut off. It has 4 ways.

●The e-series is ideal for boats equipped with small to medium-sized diesel engines.

●Manufactured by BLUE SEA, which boasts a top market share in the United States for electrical wiring parts related to RVs and boats, and is recommended by many builders.

●Continuous withstand current: 350Amp

●Momentary withstand current: 1750Amp (2.5 seconds)

●Maximum voltage: 48V

●Size: 97.8×97.8mm

●Terminal stud: 9.5mm

◆◆◆Main features◆◆◆

●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.

●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.

●You can tell that the knob is firmly in each position by a firm "click" response.

●There are two installation methods. Compatible with wall mounting and stationary mounting methods.

■Material: Steel
■Ball size: 50mm
■Shaft diameter: 19mm
■Maximum towing weight: 1350kg
■Total length: Approximately 110mm
■Shaft length: approx. 40mm
■Below the neck: approx. 70mm
*Please note that there are individual differences in size.

[Application] For stubborn stains such as black spots on exhaust ports.
[Applications] FRP, metal, painted surfaces
[How to use] Wait for a while after spraying, then rinse with a hose.

Removes especially stubborn dirt that floats to the waterline during navigation.
Can be used on FRP, metal, and painted surfaces. It is also effective for removing black stains from exhaust ports.
●Capacity: 650ml

[Application] Removal of rust, stains, and oil stains
[Applications] FRP, metal, painted surfaces
[Type] Environmentally friendly biodegradable cleaner

Removes rust, stains, and oil stains without scrubbing.
For particularly dirty areas, please use Strake Cleaner (Part No. 23624).

●Capacity: 946ml

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×200m.

*[Product number 23521] 15m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ10×200m.

*[Product number 23520] 12m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×15m

*[Product number 23522] 200m is also available.