Collection: UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")

■Waterproof car seat cover for single seats - Easy to install, just hang it on the headrest and fits most seats.
- Made of wet fabric (chloroprene), so even if the surface gets wet, the inside is waterproof!
・It will not stain the car seat directly even if you get in the car while it is dirty or wet.
- The lining fabric is non-slip and does not easily slip off.
・The rubber back belt holds the seat firmly. ・With foot pockets!
The 12cm high pocket, which is neither too deep nor too shallow, is very convenient for storing drinks, parking tickets, cleaning sheets, etc.
You can keep the inside of your car neat and tidy with discreet storage under your feet.

■Protects your car seat from wear and tear caused by sweat, dirt, and pets after Mt. Umikawa or various field sports. Perfect for outdoor activities such as camping and swimming!
■3 colors: black, gray, and khaki to suit various car models ■For independent seats such as driver's seat and passenger seat ■Quantity: 1 piece

■Material■
Surface: Chloroprene Back: Slice skin

■Product details■
Product total length: 152cm
Main body (excluding headrest): Width approx. 64cm x length 132cm
Headrest part: width 24cm x height 20cm x gusset 10cm
Pocket: height 12cm x width 21cm (3 pockets in total)
Back rubber belt: Width 3cm x length 33cm (each side)
Product top logo: width 7cm x height 32cm
Pocket bottom left logo: width 10cm x height 2cm
*Due to the characteristics of the fabric, there may be an error of approximately 1cm.

■The popular UNLIMITED car seat cover has been upgraded.
■Equipped with three pockets on the feet and a back belt, making it much easier to use.
■The pockets at the feet can be used to store parking tickets, drinks, sunglasses, cleaning supplies, disinfectant wipes, etc., and are convenient for going out when your luggage is bulky! It can be stored in an inconspicuous place under your feet, which helps keep the inside of your car tidy.
■The bag belt is made of elastic rubber. The belt is 33cm long on one side, and the Velcro has a secure movable width of 30cm, so it can be easily adjusted. ■Made of chloroprene fabric used for wet suits, etc., so even if the surface gets wet. Water will not penetrate to the back side. It is safe to have when going outdoors such as marine sports or camping, or when going out with children or pets ■When the car seat cover is not in use, it can be folded compactly and stored in the headrest.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, do not use a washing machine, dryer, or bleach.
- When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
- There may be creases when opening the package, but this is not a product defect.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

To install, just hang it on the rear seat top.
It's made from chloroprene fabric, which is used in wetsuits, so even if the surface gets wet, water won't seep through to the back. It's safe to have when going outdoors such as marine sports or camping, or when going out with children or pets.
Even if you ride in a wetsuit, the seat will not get wet.
The back side is made of skin material, so it's not only waterproof, but also stays in place even when you get in a car in a hurry.

Also, if you hang it from the trunk space side, it can also be used as a dirt-proof cover for the back space, which is very convenient.
Since it can be rolled up and stored, it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for the trunk room, a flat sheet for outdoor use, and a cold-proof sheet.
It has the best texture and is not too thick.

Not only marine wear, but also sweat and dirt after various field sports, wear and tear caused by pets, etc., are all you need to protect your car seats.

■Surface: Chloroprene ■Back: Slice skin ■Size: W125xH130cm

*Due to the elastic material, there may be an error of ±1 to 2 cm during the manufacturing process.
*The image of all seats is for illustrative purposes only.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
・There may be creases when opening the package, but this is not a product defect.

A cap with a large "LOOK FAST and GO FAST" logo.

■The front panel of the hat features a custom embroidered logo.
The thick embroidery gives it an outstanding sense of luxury. The back style has gold brand embroidery.
■The wide and straight brim type, which is widely popular in street style, is extremely fashionable.
The arched brim blocks more sunlight from hitting your face, but it also reduces your visibility.
The UNLIMITED cap has a wide brim that blocks sunlight while ensuring visibility.
■One size fits all The size can be adjusted with a snapback closure (adjuster) at the rear.
■The inside of the brim is colored red to emphasize the design.

■For everyday wear such as sweatshirts, printed T-shirts and board shorts,
Add a cap for a street look...a popular casual style.

■Can be worn backwards with a collared shirt or polo
The UNLIMITED cap also has a logo on the back style, giving it a shrewd look.

■Capacity: 500ml
■Size Diameter: 73×189mm
Body weight: Approx. 83g
Caliber: approx. 26mm

■Material Body/Hook: Aluminum Cap: Polypropylene/Silicone rubber

New collaboration item with bright red bottle color and double names “UNLIMITED” and “OUTDOOR” now on sale!

Perfect for both the office and outdoors!
It is strong and has no seams because it is molded using pressure from a high-purity aluminum plate.

Stainless steel is heavy and plastic is prone to deterioration.
Aluminum bottles are lightweight and do not deform, covering these weaknesses.
Sports drinks OK! The special stock processing on the inside keeps the taste of your drink.
It also prevents lingering odors, so you can use it without worrying about the last drink you put in it.

■UNLIMITED logo color 2 colors: “black” and “white” (OUTDOOR logo is white only)

*Suitable for ages 6 and up *Please do not add boiling water, dry ice, or carbonated water.
*Other precautions for use are listed on the product box. Please be sure to check before use.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*The company's adjustable handle mount
[UL35003] For [UL35003-ULD] (UL35007 head plate only)

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For the company's UL35300 shockless handle mount

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

[Compatible models] KAWASAKI
STX160 series
STX series
800X-2
ULTRA series (※)
*2022 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

■Handlebar clamp: Compatible with standard handlebars (diameter 22+-0.2mm, 7/8")

An innovative steering mount kit with a built-in spring in the steering mount.
The moderate spring repulsive force absorbs shock during riding and reduces rider fatigue.

The stroke amount is a 7mm stroke that has a movable range that does not easily affect riding.
To achieve smooth movement, lubrication is possible from the grease nipple on the top of the steering mount.
The internal components are made of stainless steel, and the steering mount body is made of aluminum billet using a precision machining center.

[Information] There are optional items sold separately.
[UL061] Fat bar clamp
[UL062] Offset clamp

【please note】
2022 ULTRA 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

Bolt kit for UNLIMTIED handle mount system

[Kit contents]
●For hull installation M8×30: 4 pieces
- Countersunk head for base M6 x 25: 3 pieces
- Pan head M6 x 30 for heads: 3 pieces

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image