Collection: Tools/Others

[Applications] A highly versatile puller that can be used for pulling out steering wheels, flywheels, motorcycle crankcases, gears, etc.

[Usage range] 38-96(mm)

[Tools used] 14mm wrench (*not included)

[set content]
・1 puller body
・1 center screw
・3 center screw adapters
・3/8” (24TPI) x 1-1/2” puller bolts 3 pieces
・3/8” (16TPI) x 2” puller bolts 3 pieces
・3/8” (16TPI) x 3” puller bolts 3 pieces
・2 3/8” (16TPI) x 4-1/2” puller bolts
・2 5/16” (18TPI) x 6” puller bolts
・3 5/16” (18TPI) x 3-1/2” puller bolts
・2 5/16” (24TPI) x 3” puller bolts
・3 5/16” washers
・2 1/4” (28TPI) x 2-1/2” puller bolts
・2 1/4” washers
・M10 (P1.5) x 35mm puller bolt 3 pieces
・3 10mm washers
・M8 (P1.25) x 45mm puller bolt 3 pieces
・M8 (P1.25) x 65mm puller bolt 2 pieces
・M8 (P1.25) x 90mm puller bolt 2 pieces
・3 8mm washers

■Total length: 497mm
●This is a driver exclusively for adjusting the pilot screw of the carburetor.
*Cannot be used for high torque tightening or loosening.

[Set contents] 1 piece each
■Body ■Auxiliary handle
■Bit: +35mm, +58mm, -23mm, -28mm, -35mm, -58mm, -95mm

[Application] Used for angle tightening during 4-stroke engine assembly.

【how to use】
1. Use a torque wrench to tighten to the specified torque before use.
2. Set the gauge to 0 and fix the main body with an L-shaped arm so that it does not move.
3. Then check the angle indicated by the gauge and tighten to the determined angle.

【detail】
Torque angle socket drive gauge: 1/2 inch
Torque angle readout range gauge: 0-360 degrees
Torque angle gauge reading increment: 2 degrees

[Compatible models] YAMAHA Yamaha SHO (4 strokes)
[Application] Used to remove the engine drive shaft coupler.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] YAMAHA XLT/XL-L/800/1200/1300GPR/FX series (4 strokes)
[Application] Used to remove the engine drive shaft coupler.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → The 2007 model hull identification number (HIN number) is written on the plate affixed to the side or rear of the hull or on the ship inspection notebook ("Subject" on the inside of the back cover). Masu
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2.The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] YAMAHA Yamaha
-------------------------------------------------- -----
[1] 90890-06518: 700SJ/800TZ/760-1200GP/760/1200XL
-------------------------------------------------- -----
[2] 90890-06519: 800/1200GPR/800XL/1200XL-L/XLT
-------------------------------------------------- -----

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Application] Ideal for locking 2 to wire
An indispensable item for installing seals, grips, etc.

[Application] A SPECIAL-TOOL for easily removing piston pins.
●Indispensable during overhaul.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible with] KAWASAKI 550/650
[Application] Flywheel removal tool
[Information] Please use as a set with flywheel puller (product number: 003-317).

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Correspondence] KAWASAKI 12F/15F
[Application] A tool to compress the valve spring in order to remove and install the valve.
[Note] Please use in combination with adapter (product number: 57001-1202).

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible with] KAWASAKI STX-15F
●A tool for fixing the impeller shaft when removing the impeller.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
Year: The year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] KAWASAKI Kawasaki 12F/15F
●The crankshaft can be rotated while the engine is mounted on the hull.
●Please use it when replacing the camshaft.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI ULTRA Ultra series
●A tool for fixing the impeller shaft when removing the impeller.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI 1100-1200/4 stroke
[Application] Tool for holding couplings

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible with] KAWASAKI 1100
●A tool for fixing the impeller shaft when removing the impeller.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer http://133.242.80.206/cargo/a_itm1-list.php
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] KAWASAKI Kawasaki 750
●Support tool when removing flywheel bolts

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI 4-stroke ALL model

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI 550-900 engine
[Application] Tool for holding couplings

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI Kawasaki 750/800
●Flywheel removal tool

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●Special adapter for piston pin puller (product number: 57001-910).
*Please note that the image is an image (the main body of the puller)*

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] KAWASAKI Kawasaki 12F/15F
●φ22

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Application] A tool used when press-fitting bearings and oil seals.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI All models
●A tool that tightens the piston ring when inserting the piston into the cylinder.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●A tool for removing oil seals and bearings from the pump case.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

Press the tip of the puller against the hose and pipe you want to remove,
The hose can be easily removed by squeezing the handle.

■Can be used for pipes with hose size 4 to 13 mm
■Total length: 20cm

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

● Band width: 38mm
●Diameter: Can be used with pistons from 54 to 127 mm.

The band that tightens the ring is a quick release type that can be easily removed and attached by removing the clip.

[Application] A tool to measure the pop pressure of the valve seat.

●Used for carburetor setting and tuning.

[Compatible] SEADOO 3 hole 8mm bolt
[Application] Flywheel removal tool

[Compatible with] SEADOO 800/951
[Application] Flywheel removal tool

GSX 800(1996-1997)
GSX RFI 800(1999-2000)
GTI LE RFI 800(2003)
GTX 800(1996-1997)
GTX RFI 800(1998-2002)
SPX 800(1997-1999)
XP 800(1995-1997)
GSX LTD 951(1997-1999)
GTX DI 951(2000-2003)
GTX LTD 951(1998-1999)
LRV 951(2000-2001)
LRV-DI 951(2002-2003)
RX 951(2000-2002)
RX-DI 951(2000-2003)
RX-X 951(2001)
XP 951(2000-2002)
XP-DI 951(2003)
XP-LTD 951(1998-1999)
GTX 1503(2002-2006)
GTX-LTD SuperCharged185 1503(2003-2004)
GTX SuperCharged185 1503(2003-2006)
RXP SuperCharged215 1503(2004)

[Adaptation] KAWASAKI 440-650 engine
[Application] Flywheel removal tool

●3 hole 8mm bolt

【Guidance】
If you are using it on a boat equipped with a 750/800 engine, please purchase "003-317".

[Applicable models] KAWASAKI Kawasaki 900/1100
[Application] Flywheel removal tool

STS 900(2001-2002)
STX 900(1997-2006)
ZXi 900(1995-1997)
STX 1100(1997-1999)
STX-DI 1100(2000-2003)
Ultra130-DI 1100(2001-2004)
ZXi 1100(1996-2003)

[Application] Flywheel removal tool
[Applicable models] KAWASAKI 750 to 800 engine

【Guidance】
If you are using it on a boat equipped with a 440-650 engine, please purchase "003-319".

Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki ST 750 1994-1995
Kawasaki STS 750 1995-1997
Kawasaki STX 750 1998
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki XiR 750 1994
Kawasaki ZXi 750 1995-1997
Kawasaki SX-R 800 2003-2011

[Compatible model]
SEA-DOO 300/260/255/215

Cheaper than genuine parts! !

●SEA-DOO 300/260/255/215 Impeller Nose Boots

*Equivalent to genuine part number 267000929

[Adaptation] SEADOO 800/951 engine
●A support tool used when removing flywheel bolts.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1. Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" inside the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●A tool for crimping bands on fuel hoses, engine boots, etc.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●Size: 480mm

●0.50L/1 stroke

●With hose

●Bilge can be discharged by moving the lever up and down with a manual bilge pump. It is very convenient to have one on the ship.

●Since it does not require electricity, it can be used anywhere.

●It is also effective for replacing water in aquariums such as tropical fish.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mm

The lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.