Collection: STX-15F (-'19)

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] KAWASAKI Kawasaki
STX15F
STX15S
STX12F
STX-R

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

[Applicable model] KAWASAKI KAWASAKI STX
STX12F/STX15F
1200STX-R
STX1100DI/900STX
STX-160(2020)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models] KAWASAKI ULTRA series (250 / 260)
ULTRA250X
ULTRA260X/ULTRA260LX
Genuine post exchangeable handle mount compatible with Kawasaki ULTRA250/260.
I remade it by tapering it from the bottom to the center. Easy to install, just replace the normal post.
Not only is it easier to operate, but it also makes the area around the handle look cool.

SE-027013 (Suitable for handlebars of common thickness)
SE-027013F (suitable for thick fat bars)
SE-027013BK (Suitable for handlebars of common thickness)
SE-027013BK-F (Suitable for thick fat bars)

[Compatible models]
KAWASAKI STX-15F/15S/12F

●By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved and top speed is also increased.

● Directly mounted on the throttle body to increase intake efficiency.

■With water repellent pre-filter
■Included: Small filter for blizzer x 2

●Series: CONCORD
●Pitch size: 16/22
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R stock engine recommended (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F/15S Stock engine recommended (normal boat) / Limited engine recommended
STX-12F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

■Series: CONCORD
■Pitch size: 13/19
■3 blades
■Applicable pump diameter: 148mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
STX-12F stock engine recommended (normal boat)
1100STX DI stock engine recommended (normal boat)
1100STX stock engine recommended (normal boat)
1100ZXI stock engine recommended (normal boat)
900STX 01-06 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] KAWASAKI
900STX(01-05)/
1100STX(00-)/
STX-Di/
STX-R/12F/15F(-19)/15S

[Color] Two-tone diamond pattern black x orange
[Number of pieces] 7 pieces
[Back side] 3M adhesive tape included

Due to the grooves uniquely carved in HydroTurf,
Riders can get excellent grip and control.
Thick, high-density foam