Collection: steering parts

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

[Compatible models]
KAWASAKI ULTRA300, 310 (-'21) series (excluding 310R)
*For UNLIMITED adjustable mount [Product number: UL35003-DAJS, UL35003-AJS] only

[Information] Please use [Product number: UL36301] for 310R.

A plate to relocate the cruise control switch installed in the throttle lever case.
By using it when replacing the stock throttle lever with an aftermarket parts lever,
There is no need to remove the cruise control function.
■Material: Stainless steel (mirror finish)

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

★Limited quantity sale★

[Compatible models] KAWASAKI
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S) / 900STS / 800X-2
[Kit contents]
Mount head, mount base Fat bar (bar diameter: 28.6 mm) Clamp cap bolt (M8 x 30 x 30 mm)
Mounting post (70mm)

*For fat bars (28.6mm diameter) only.
*If you are using a 22.4mm handlebar, please prepare a bar spacer separately. (Part number: UL35002)*

◇◆ Limited edition steering mount kit using 70mm steering post. ◇◆
*The standard [UL35003] model is 80mm.

●You can choose the height and bar of your choice.
●The ultimate low-down handlebar mount! Successfully lowers the handlebars by 120mm from the stock mount.
●The handlebar height can be adjusted by replacing the optional post, making it compatible with many KAWASAKI models.
●By making the post base and clamp base components interchangeable, 18 different positions can be selected.

[Information]
This product is for STX series / 900STS / 800X-2, but by replacing it with the optional items below, it will also be compatible with the following variations!
●ULTRA series...Uses optional 160mm mounting post. The most low-down mount!
●For models (ULTRA250/260/260LX/LX) equipped with a handlebar mount cover (product number: UL048-C, UL35005)...please purchase the optional 230mm mount.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

[Compatible models] KAWASAKI
ULTRA series (250 / 260 / 300 / 310* / LX)
*Cannot be used for 2022 new ULTRA310LX, 310LX-S ■Clamp: Standard equipment for standard bar (22.4mm diameter)

UNLIMITED lowdown & direct mount.
It is mounted 80mm lower by directly mounting the lower bridge.
By cutting the aluminum pipe, it can be used not only for 800X-2 but also for STX series.

The width of the variable height is 100mm. Two positions can be selected for the top and under bridges, allowing the front and rear mount positions to be moved up to 30mm.

[Kit contents]
●Standard bar clamp (UL39001)
●Upper bridge ●Lower bridge ●Aluminum pipe ●Pipe cap ●Mounting bolt ●Direct mount base (UL35009)

*Direct mount base can be purchased separately (Product number: UL35009)

Bolt kit for UNLIMTIED handle mount system

[Kit contents]
●For hull installation M8×30: 4 pieces
- Countersunk head for base M6 x 25: 3 pieces
- Pan head M6 x 30 for heads: 3 pieces

[Compatible models] KAWASAKI
ULTRA series (250 / 260 / 300 / 310* / LX)
*Cannot be used for 2022 new ULTRA310LX, 310LX-S.
■Clamp: Standard equipment for standard bar (22.4mm diameter)

From UNLIMITED handle mount series
A steering system exclusively for the ULTRA model is now available!
By connecting the upper and lower bridges with aluminum pipes, it is possible to select a riding position approximately 100mm wide. The bridge mounting position can be selected from two locations, upper and lower, and the position can be moved approximately 30mm from front to back.

[Kit contents]
●Handle mount kit (UL35003)
●Upper bridge ●Lower bridge ●Aluminum pipe ●Cap ●Mounting bolt

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

Clamp for fat bar (28.6mm diameter) and standard (22.4mm diameter) handlebar

[Size] Length 30mm
[Quantity] 4 pieces 1 set
[Material] Made of aluminum

Perfect fit for UNLIMITED fat bar clamp (model number: UL061).
Compatible with fat bar clamps other than UNLIMITED.

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

Spare bolt for aluminum lock ring (UL32003) included with UNLIMITED lock grip
*Cannot be used with grips from other manufacturers such as ODI grips.

[Size] M4 x 12mm
[Material] Stainless steel (SUS)

【please note】
*Cannot be used with grips from other manufacturers such as ODI grips.
*Please be careful not to overtorque when tightening.

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Adaptation]
KAWASAKI ULTRA series & stand-up model
ULTRA250X / ULTRA260X / 260LX
ULTRA300X/300LX
ULTRA310X / 310SE / 310LX (-'21)
ULTRA LX
ULTRA130 ULTRA150
YAMAHA stand up model SJ FX1
*Cannot be used on YAMAHA runabout models.

■Material: Aluminum ■Type: Handle diameter: 22.4mm Standard ■Color: Black

Handlebar compatible with KAWASAKI genuine V-type clamp type.
Based on the ULTRA250/260 genuine handlebar, it has been extended 25mm wider on the left and right, making it the same length as the 300/310 series.
The lever and grip have plenty of room to achieve easy cornering.
Moreover, it is a revolutionary handlebar that allows you to use the genuine handlebar cover!
For stand-up users, the wing-swept handlebars keep the center of gravity low and enable hard cornering.

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
Can be installed on runabout models
Compatible with 28.6mm handle clamp

【type】
Handle diameter: Clamp mounting part 28.6mm,
Grip/lever mounting part 22.4mm

●The clamp part is thick and flexible, making it a wide handle with excellent flexibility and strength.
●Wide handle has sufficient rigidity and is coated with carbon Kevlar.
★Also available in silver without carbon coating (UL049).
*A separate fat bar clamp (UL061 recommended) is required for installation.

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

[Compatible models] KASAWAKI Kawasaki
ULTRA250X/LX/260X/260LX/300X/300LX/310

The mount is now 145mm higher than the previous position and compatible with the ULTRA series.
The 5° offset remains the same, allowing you to ride in the best position.
The STX series can be said to be the best item for enduro endurance races.
A fat bar handle can also be attached with a separate optional clamp (UL061).

-Size: Total height 265mm
*For the ULTRA series, the handle tilt mechanism cannot be used.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

[Compatible models] KAWASAKI ULTRA series (250 / 260 / 300 / 310)

ULTRA250X
ULTRA260X/ULTRA260LX
ULTRA300X/ULTRA300LX
ULTRA310X / ULTRA310LX / ULTRA310X-SE / ULTRA310R

[Compatible models] KAWASAKI ULTRA series (250 / 260)
ULTRA250X
ULTRA260X/ULTRA260LX
Genuine post exchangeable handle mount compatible with Kawasaki ULTRA250/260.
I remade it by tapering it from the bottom to the center. Easy to install, just replace the normal post.
Not only is it easier to operate, but it also makes the area around the handle look cool.

SE-027013 (Suitable for handlebars of common thickness)
SE-027013F (suitable for thick fat bars)
SE-027013BK (Suitable for handlebars of common thickness)
SE-027013BK-F (Suitable for thick fat bars)

[Applicable model] For Kawasaki 800 X-2 (for freestyle)

●For freestyle The height is 10mm higher than the normal one, and can be adjusted backwards within a range of 20 to 30mm.

[Applicable model] For Kawasaki 800 X-2 (for racing)

●For racing (race specification)
Height is 50mm lower than normal and can be adjusted backwards within a range of 15-25mm.

[Compatible models] YAMAHA 2015-FX
2015-2021 YAMAHA FX SVHO
2015-2021 YAMAHA FX LTD SVHO
2015-2021 YAMAHA FX HO (1.8L)
2015-2021 YAMAHA FX CRUISER SVHO
2015-2021 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA FX SHO (1.8L)

Greater strength and stiffness than the original OEM steering system.
Billet stainless steel steering shaft is much stronger than the stock OEM aluminum shaft.
Cutting-edge lace styling. The bar clamp has variable height and tilt adjustment.
All common 7/8" handlebars are available.
Billet steering arm features an adjustable "quick turn" setting.
Holds the throttle steering system.
All aluminum parts are anodized to prevent corrosion.

[Compatible model] YAMAHA GP1800
2019-2020 YAMAHA GP1800R SVHO
2017-2018 YAMAHA GP1800
2015-2019 YAMAHA VXR (1.8L)
2015-2016 YAMAHA VXS (1.8L)

Greater strength and stiffness than the original OEM steering system.
Billet stainless steel steering shaft is much stronger than the stock OEM aluminum shaft.
Cutting-edge lace styling. The bar clamp has variable height and tilt adjustment.
All common 7/8" handlebars are available.
Billet steering arm features an adjustable "quick turn" setting.
Holds the throttle steering system.
All aluminum parts are anodized to prevent corrosion.

[Compatible] For ODI grips only. *Cannot be installed on anything other than ODI.

Set includes 2 lock rings and 2 end caps.
Coordinating it with the hull of the boat or other items will make it look stylish.
*Colors not listed as options are sold out*

[Reason for outlet sale] Long-term inventory. The package has some dirt from storage.
*This is not a used item. It is being offered at a special price due to stock replacement.
*Please note that we cannot accept returns or exchanges due to the special price.
*Please contact us before purchasing if you have any questions.
---------------------------------------------

[Compatible] ODI grip [Contents] 2 pieces in a set

ODI003-2 Black

ODI aluminum grip end.
*For ODI only. We cannot answer questions about compatibility with products of other brands.
Made from aluminium, it is strong and looks stylish.

●Hard type
●With 3/4 flange
-Size: Total length 120 (grip part 95) x 29mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

Fine granular protrusions provide high grip strength.
A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

[Compatible models] KAWASAKI
SX-R1500 NEW SX-R
800SX-R
SXi-Pro/SXI/SX

handle pole spring
By attaching it with a spring that is approximately 70% stronger than the original, the handle pole weight is reduced by 60%, reducing the burden.
This is an essential item when using the genuine handle pole.

[Compatible models] YAMAHA SJ (96-20)

By installing the handle pole spring with a spring that is approximately 70% stronger than the genuine one,
The weight of the handle pole is 40% lighter, reducing the burden.

●This grip has an ergonomic design that allows you to control the machine more easily and aggressively.

●This is a genuine grip adopted by SEA-DOO from 2016.

●Easy to replace the standard grip for Sea-Doo 1999 and later *Excluding '14-'15 SPARK.

[Compatible] Sea-Doo 1999 and later *Excluding '14-'15 SPARK

[Contents] 1 piece on each side *1 piece is required on both sides.

[Installation] Bolts, washers, inserts, and caps are not included, so please use existing ones.

*The first photo is an image of the left and right grips.
*If you need one unit, please order one each for the left and right sides.