Collection: SPARK

[Applicable model] SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-13S Silver
S-13B black

[Compatible models] SEADOO SPARK

This provides dramatically improved control when cornering and in rough conditions.
It can be installed by bolting onto the original holes.

[Compatible models] Sea-Doo
SEA-DOO 2009 and later models equipped with electronic throttle (iTC) and I-brake (IBR) system
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[Product Name] iTC iBR LEVER KIT iTC iBR LEVER KIT

By making the lever end part flip up, the grip on your fingertips increases and prevents your fingers from slipping out! A sophisticated and stylish lever made from machined aluminum.

By creating a drill hole in the lever part and making the lever end part flip up, the grip on the fingertips increases and prevents fingers from slipping out.
This unique trigger shape pursues racing.
■Machined aluminum

UL33002SL Silver
UL33002RD Red
UL33002YL Yellow

Ride plate for SEA-DOO SPARK

[Compatible models] SEADOO
SPARK

This is the part that serves as the inlet for the water flow that sends water to the pump, and has the effect of improving the grip on the water surface.

intake gate

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

[Applicable model] SEA-DOO
SPARK 2-up(2014-19)
SPARK 2-upTRIXX(2017-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

S-14B black
S-14S Silver

[Compatible models] SEADOO SPARK Spark

[Compatible models] SEA-DOO
SPARK Spark

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

intake gate

[Compatible models]
SEA-DOO SPARK

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

[Compatible models] SEADOO
For SPARK 2UP only *Cannot be installed on SPARK 3UP (separate product for 3UP, part number: RS15130-C )

By avoiding the resonator behind the water box and using rear exhaust,
Improves engine performance.

[Compatible models] SEA-DOO SPARK Spark

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.