Collection: PWC Parts & Supplies

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI UNLITED head plate (model number: UL35007) only
(*Product used: UL35003-ULD)

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.
UNLIMITED Handle Mount ULTRA Low Down Mount Kit (UL35003-ULD)
This is a special kit for the head plate used.
■Material: Stainless steel

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

Bolt kit for UNLIMTIED handle mount system

[Kit contents]
●For hull installation M8×30: 4 pieces
- Countersunk head for base M6 x 25: 3 pieces
- Pan head M6 x 30 for heads: 3 pieces

[Compatible models] KAWASAKI
ULTRA series (250 / 260 / 300 / 310* / LX)
*Cannot be used for 2022 new ULTRA310LX, 310LX-S.
■Clamp: Standard equipment for standard bar (22.4mm diameter)

From UNLIMITED handle mount series
A steering system exclusively for the ULTRA model is now available!
By connecting the upper and lower bridges with aluminum pipes, it is possible to select a riding position approximately 100mm wide. The bridge mounting position can be selected from two locations, upper and lower, and the position can be moved approximately 30mm from front to back.

[Kit contents]
●Handle mount kit (UL35003)
●Upper bridge ●Lower bridge ●Aluminum pipe ●Cap ●Mounting bolt

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

Spare bolt for aluminum lock ring (UL32003) included with UNLIMITED lock grip
*Cannot be used with grips from other manufacturers such as ODI grips.

[Size] M4 x 12mm
[Material] Stainless steel (SUS)

【please note】
*Cannot be used with grips from other manufacturers such as ODI grips.
*Please be careful not to overtorque when tightening.

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

[Compatible models] YAMAHA 700SJ ('96~)
*For RULE bilge pump only

[Accessories] 8 rivets

[01689]:500[97033]:800[01608]1100 Stay when installing bilge pump.
Two bilge pumps can be installed.
Bilge pump holder [12-1116] can be installed in 45 degree increments.

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

[Applicable models] KAWASAKI 750 / 800SX-R / 800X-2

Unique angle (3.2 degrees) increases intake efficiency,
The one-piece structure also enhances the sense of unity between the carburetor and intake manifold.

[Compatible models]
Yamaha GP1800/VXR/VXS models from 2011 onwards

■Material (pipe): Aluminum

located between the water vehicle's water box and the hull exit.
Replace your restrictive sound suppression system.
Improves engine performance by reducing back pressure and harmful detonation.
Mandrel-bent aluminum tubing, powder coated to prevent corrosion
A replacement coupler made of high temperature silicone is included.

[Compatible models] Yamaha FX models from 2012 onwards

■Material (pipe): Aluminum

Replaces the restrictive sound suppression system between the water vehicle's water box and the hull exit.
Improves engine performance by reducing back pressure and harmful detonation.
Mandrel-bent aluminum tubing, powder coated to prevent corrosion
A replacement coupler made of high temperature silicone is included.

[Compatible models]
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)

■Material (pipe): Aluminum

It replaces restrictive sound suppression systems located between the water vehicle's water box and the hull outlet.
It reduces back pressure and harmful detonation, improving engine performance.
Mandrel bent aluminum tubing that is powder coated to prevent corrosion,
Replacement couplers made from high temperature silicone are included.

*For models from 2023 onwards, the Siphon Break Delete Kit ( RS10123-SBD ) is required separately.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.