Collection: PWC Parts & Supplies

【Applicable Models】YAMAHA
FX (up to 2011 models), FZS (up to 2012 models)
FX140 / FX160 / HO (06-11) / SHO (08-11) / Cruiser / FZS (-16)
*For FX 2012 models and later, part number Y-12 is compatible.

【Material】Polyester
The interior uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover produced domestically, from fabric to sewing.

1.【Tape】Colored tape is used to make it easier to identify the front when putting on the cover.
2.【Reinforcement】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3.【Handle】The handle area is also reinforced with double-layered fabric.
4.【Buckle】Securely fastens to the hull with a single touch.

【Disclaimer】
*The colors of the stitching, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】YAMAHA EX Series

【Material】Polyester
The interior is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. 【Tape】Colored tape is used to easily identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as a backing for the mirror area to prevent chafing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the production lot.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after an order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
1 [S-2B(S-3B)]: RX/RX D.I/HX
2 [S-XPB(S-6B)]: XP (97-)/XP-L
3 [S-RXP-B(S-2B)]: RXP/RXP-X 255 (*)
*RXP-X 260 RS 2012 models and later are not compatible.

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts.
From fabric to sewing, domestically produced in Japan, high quality.

Special Features
1. 【Tape】Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as reinforcement in the mirror area to prevent rubbing.
3. 【Handle】The handle area is reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please Note】
*The color of the stitching, tape, and bands may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after your order has been placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible models】SEA-DOO
1【S-2B(S-3B)】 ：RX/RX D.I/HX
2【S-XPB(S-6B)】 ：XP（97-）/XP-L
3【S-RXP-B(S-2B)】：RXP/RXP-X 255(※)
*RXP-X 260 RS from 2012 onwards is not compatible

【Material】Polyester
The inside uses long-fiber non-woven fabric to protect the body and the fiber parts.
From fabric to sewing, all made in Japan, high quality

Features
1. 【Tape】The front is marked with a colored tape to make it easy to identify when putting on the cover.
2. 【Reinforcement】Non-woven fabric is used as a reinforcement on the mirror parts to prevent chafing.
3. 【Handle】The handle part is also reinforced with double fabric.
4. 【Buckle】Securely fastens the hull with one-touch buckle

【Please note】
*The color of stitches, tape, and bands may vary depending on the time of arrival.
*As this is a build-to-order product, returns, exchanges, or cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies depending on the season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
1 [S-2B (S-3B)]: RX/RX D.I/HX
2 [S-XPB (S-6B)]: XP (97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)
* Not compatible with RXP-X 260 RS 2012 and later

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
High-quality, domestically produced fabric and stitching.

Features
1. [Tape] The tape is colored to make it easy to identify the front when putting on the cover.
2. [Backing] Non-woven fabric is used as backing in the mirror area to prevent chafing.
3. [Handle] The handle area is reinforced with a double layer of fabric.
4. [Buckle] Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the production lot.
* As this is a made-to-order product, returns, exchanges, and cancellations are not accepted after the order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible Models】SEA-DOO
RXP-X 300 (2016-2019)
RXP-X 260 (2012-2015)

【Material】Polyester
The inside is made of long-fiber non-woven fabric to protect the body and the fiber parts.
Fabric and sewing are made in Japan, high quality

Features
1. 【Tape】 Colored tape is used to easily identify the front when putting on the cover.
2. 【Reinforcement】 Non-woven fabric is used as reinforcement for the mirror area to prevent chafing.
3. 【Handle】 The fabric on the handle area is doubled for reinforcement.
4. 【Buckle】 Securely fastens the hull with a single touch

【Please Note】
* The color of stitches, tape, and bands may vary depending on the time of arrival.
* Due to made-to-order production, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so please inquire in advance if you are in a hurry.

S-11B Black

【Compatible Models】KAWASAKI STX
1200STX-R
STX12F / STX15F
STX1100DI / 900STX
STX-160 (2020)

【Material】Polyester material
The interior is made of long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, domestically produced from fabric to stitching.

1. 【Tape】 Colored tape is used to make it easy to identify the front when putting on the cover.
2. 【Backing】 Non-woven fabric is used as backing on the mirror parts to prevent chafing.
3. 【Handle】 The handle area is reinforced with a double layer of fabric.
4. 【Buckle】 Securely fastens the hull with a single touch.

【Please Note】
* The color of the stitching, tape, and bands may vary depending on the time of arrival.
* As this is a made-to-order product, returns, exchanges, and cancellations are not accepted after an order is placed.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

【Compatible models】KAWASAKI
For 4-stroke 1500SX-R (2017~) models only

【Material】Polyester material
The inside uses long-fiber non-woven fabric to protect the body, safeguarding the fiber parts of the hull.
This is a high-quality cover, with domestic production from fabric to sewing.

1. 【Tape】The tape is colored to make it easy to identify the front when putting on the cover.
2. 【Backing】Non-woven fabric is used as backing for the mirror part to prevent chafing.
3. 【Handle】The handle part is also reinforced with double-layered fabric.
4. 【Buckle】Securely fastens the hull with a single touch.

【Please note】
*The colors of the stitching, tape, and bands may vary depending on the arrival time.
*As this is a build-to-order product, returns, exchanges, and cancellations are not possible after ordering.
Production lead time is 2 weeks to 1 month. It varies by season, so if you are in a hurry, please inquire in advance.

K-12B Black

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

【Compatible models】KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035W-GR Green
SE-101035W-RD Red

・NEW-WIDE (The base is 8mm wider than conventional models, improving running stability!)
・The angle of the side fins can be adjusted steplessly from 0 to -12 degrees relative to the lower edge of the sponson plate.
・The protrusion amount of the side fins is 25mm from the sponson plate surface.
・The sponson plate with side fins has its rear end cut, reducing the protrusion amount.
・The mounting position of the sponson plate can be selected from 4 positions: up to 24mm in the front-back direction and up to 11mm in the up-down direction, similar to conventional models.
・The flap at the rear end of the base plate can also be adjusted steplessly from 0 to -14 degrees, similar to conventional models.
Guide lines are engraved, making it easy to align the angles on both sides.

【Compatible models】 YAMAHA FZR / FZS

【1】SE-027020 For STD standard handlebars (STD bar Φ22.4)
【2】SE-027020F For FAT fat handlebars (FAT bar Φ28.6)

● Developed in collaboration with Krismackle Gauge!
● The handlebar position is set as low as possible to suit racing conditions.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRT1008: Outer diameter 8 x 10 x 10mm / Inner diameter 5 x 7 x 7mm
NHRT1210: Outer diameter 10 x 12 x 12mm / Inner diameter 7 x 8 x 8mm
NHRT1412: Outer diameter 12 x 14 x 14mm / Inner diameter 8 x 10 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select a size.
NHRE0806: Outer diameter 6 x 8mm / Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm / Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm / Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14mm / Inner diameter 8 x 10mm

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Select a size
NHRC0806: Outer diameter 6x8mm / Inner diameter 4x5mm
NHRC1008: Outer diameter 8x10mm / Inner diameter 5x7mm
NHRC1210: Outer diameter 10x12mm / Inner diameter 7x8mm
NHRC1412: Outer diameter 12x14mm / Inner diameter 8x10mm

[1: 97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2: 97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3: 97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4: 97-4339] 3/8×1/2×1/2 Outer diameter 11mm・14mm Inner diameter 6mm・8.5mm.

Shape: T-shape
Used when changing the routing by installing it between cooling hoses, or when establishing a bypass line.

Parts PWC personal watercraft engine parts jetski jet ski

Colored Plug Cap
●Quantity: 1 piece

■Please use compatible main jets and slow jets for CV and CDCV carburetors.
■WSM products
*Some products may not have the number stamped on them.
*Due to the material, some discoloration that does not affect use may be observed.

006-7080

006-7110　110
006-7115　115
006-7120　120
006-7125　125
006-7128　128
006-7130　130
006-7132　132
006-7135　135
006-7138　138
006-7140　140
006-7142　142
006-7145　145
006-7148　148
006-7150　150
006-7152　152
006-7155　155
006-7158　158
006-7160　160
006-7162　162
006-7165　165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fittings used when removing the carburetor choke shaft.

[For KEIHIN]
006-538 Primer Inlet
006-539 Blind Cap

This is a cap to be installed when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

【Compatibility】 MIKUNI SBN Carburetor
006-438 for SBN38mm
006-444 for SBN44mm
006-446 for SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetors.
●Kit includes: shaft, butterfly, E-clip, seal, bushing, nylon washer

Better value than genuine parts!!

Sea-Doo Driveshaft Carbon Ring
【003-110-01】For 22mm driveshaft
●Genuine part number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., S.C., Wake

-------------
【003-110-02】For 27mm driveshaft
●Genuine part number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

【Compatible models】 KAWASAKI

Very convenient, as it floats even if dropped in water.
Please use according to your wrist size.

【Float Color】×【Lanyard Color】
A2126 Black × Silver
A2148 Red × Black
A2151 Blue × Silver
A2149 Green × Black

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.