Collection: Newest Products

[Contents] 2L
■Estimated peeling process: Approximately 5 square meters for 2L

【how to use】
After washing with water, dry the peeled surface and apply 441 as thickly as possible.
After leaving it for 15 to 20 minutes, use a scaler made of material (such as plastic) that will not damage the gel coat surface.
Remove any floating paint with a remover and finish by wiping this product completely with thinner, etc.

●A stripping agent for cleaning the base of the ship's bottom.
●A neutral type with little irritating odor, it is made of ingredients that are friendly to the human body and the environment, and will not damage the gel coated surface of FRP.

【please note】
When working, avoid closed rooms and do so in a well-ventilated area.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-150
●Total weight: approx. 4kg
●Drug amount: 1.5kg
●Protection volume: 8 cubic meters
- Overall height: approx. 475mm, overall width: approx. 110mm, depth: approx. 107mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 6 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport model No. 4142
●Validity period: 6 years

【please note】
*Recycling sticker is not attached.

This is a high-strength type hinge that uses stainless steel for the entire wall thickness. *This is not a type that is made thicker by bending a stainless steel plate.
We use SUS316 material that is resistant to rust and corrosion and maintains a beautiful shine.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Size: 105 x 27 x thickness 4mm

This is a high-strength type hinge that uses stainless steel for the entire wall thickness. *This is not a type that is made thicker by bending a stainless steel plate.
We use SUS316 material that is resistant to rust and corrosion and maintains a beautiful shine.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Size: 68 x 26 x thickness 4mm

[Product specifications]
■Type: Wall-mounted type
■Material: Stainless steel SUS304
■Size: Height 255 x 48mm
■Holder inner diameter: 40φ
...
■Mounting screws are not included.

There is rubber inside the holder to prevent the rod from being scratched.

[Product specifications]
■Type: Pipe mounting type
■Material: Stainless steel
■Size: Total length 250mm
■Holder inner diameter: 40φ
■Pipe diameter that can be installed: 19 to 27.2φ (mm)
...
Can be fixed in 360 degrees free position

A rod holder that can be easily attached to a pipe.
Has anti-scratch rubber on the inside of the holder.
The holder part is connected to the pipe fixture with a special metal fitting that can be fixed in any position 360 degrees, so it can be fixed in any convenient position.

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●Loop strap for Dutton PWC.
●Winch belt with small hook.
- Comes with a loop strap that is convenient for fixing the PWC without damaging it.

[size]
■Strap width: approx. 5cm, length: approx. 3.6m, stitch width: approx. 9.5cm
■Loop part: approx. 2.54cm, length: approx. 1.22m

● Compatible with Hull guard fender, PWC buoy, mark buoy (fender, buoy that uses 97560 nozzle)

●A hand pump for manually inflating air.

●Since the amount of air injected is small, please use it to replenish air when it leaks.

[Set contents] 3-piece set: main body, hose, and nozzle

■A manual fuel delivery pump that is convenient when starting an outboard engine.

■Compatible with hose inner diameter 3/8 (9.5mm)

[About the product]
Please note that the product color may differ depending on the arrival time.

The sophisticated aerodynamic design allows for efficient and smooth inflation.
It also has a design that makes it easy to hold with one hand, making it easy to handle.

Can be used with household AC100V or cigarette socket DC12V power supply.
It can inflate approximately 450 liters of air per minute. (Varies depending on temperature, usage conditions, etc.)
A floating ring with a diameter of 60cm can be inflated in about 30 seconds.

Three types of nozzles are included, so just set the nozzle according to the valve size.
It can be inflated smoothly.

■Power supply
1.DC12V (cigarette lighter plug) voltage/current DC12V/12A
2.AC100V (outlet plug) Voltage/Current AC100V/1.8A

■Continuous use time: Approximately 5 minutes (requires cooling for 15 minutes or more after use)
■Air flow rate: Approximately 450L/min *Varies depending on temperature, usage conditions, etc.
■Accessories: 3 types of nozzles, instruction manual (Japanese)

[Caution] It is dangerous to use the product in locations exposed to rain or seawater as it may cause electric shock.

●Foldable hanging type radar reflector.

[Product specifications]
■Material: Aluminum
■Dimensions: 300 x 300 x 415mm

●The brass lock (main body: made of brass) prevents theft, making it rust-resistant and durable.

●A set of 5 uses a common key, so you can lock all 5 with one key.

[Product specifications]
■Maximum capacity: 300Amp
■Flange diameter: 58.5mm
■With waterproof cap
*Detailed size is shown in the photo

●A simple toggle switch type battery switch.
●Can be used to supply and cut off battery power.
●The red switch lever can be removed.

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

●This is a spare horn for mini jet horn (product number: 60445).

●It's safe to have one as a spare in case you lose or damage the horn part.

Spare cartridge for mini jet horn (product number: 60445).
■Cartridge capacity: 200ml
■Cartridge diameter: approx. 53mm
■Cartridge part overall height: approx. 135mm
■Products not subject to fluorocarbon gas regulations

【please note】
This product does not include a horn.

●This is an air horn that makes a loud sound of about 108 decibels just by pressing it.

-A set of 1 bugle part and 2 cartridges. We also sell cartridges only (product number: 60446, ¥1,785), so they can be used repeatedly.

●Cartridge capacity: 200ml/1 bottle

●Intermittent pronunciation time: Approximately 20 minutes
*Intermittent sounding time is the total time it takes for the cartridge to empty after the sound is played several times. Please use this as a guideline as it will vary depending on usage conditions such as external temperature.

*The continuous sounding time is approximately 1/4 of the intermittent sounding time. This is because the temperature inside the cartridge decreases due to sound production, and once the cartridge returns to room temperature, it can be used again.

●The continuous sound time is approximately 1/4 of the intermittent sound time. This is because the temperature inside the cartridge decreases when the cartridge is sounded, and when the cartridge returns to room temperature, it can be used again.

●Products not subject to fluorocarbon gas regulations

●Sound pressure: Approximately 108 decibels

●Basic frequency: 500Hz(+-)30

●Cartridge diameter: approx. 53mm

-Cartridge part overall height: approx. 135mm

●Horn diameter: approx. 60mm

-Horn part total length: approx. 150mm

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 11mm
■Chain inner diameter: 43 x 14mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 8mm
■Chain inner diameter: 38 x 13mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 6mm
■Chain inner diameter: 30 x 10mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

■This is a fuel hose that comes with a pump (primer pump) for manually dispensing fuel, which is convenient when starting an outboard engine.

■Used to connect between the fuel tank and engine.

■Total length: 1.9m

■Hose inner diameter: 3/8 (9.5mm)

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

-Material: Steel (black paint)

-Mounting hole size: 13-14.8cm x 13-14.8cm

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

[Product size]
■Total length (A): 283.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 245.0mm
*Accessories: End cap

[Product size]
■Total length (A): 235.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 194.0mm
*Accessories: End cap

[Product size]
■Total length (A): 136.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 99.0mm
*Accessories: End cap

■Slide width (A): 126.0mm
■Inner width (B): 306.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 255.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 206.0mm
■Depth (C): 163.0mm

■Slide width (A): 127.0mm
■Inner width (B): 128.0mm
■Depth (C): 103.0mm

This is the bracket required to secure the keel roller and attach it to the trailer.

■Slide width (A): 65.0mm
■Inner width (B): 112.0mm
■Depth (C): 103.0mm

■Roller diameter (A): 89.0mm
■Width (B): 194.0mm
■Shaft diameter (C): 16.0mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.

■Material: Steel plated
*The grip part is narrower type.

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

[Product specifications]
Outer diameter: 203mm
Opening diameter: 152mm
Hole diameter: 159mm

Working by putting your hands inside the double structure,
This is an opening hole for working in areas that are hard to reach.
Apply silicone adhesive, etc., and then install and fix it.

【please note】
*Cannot be installed on the floor where you will step on it.

[Product specifications]
Outer diameter: 146mm
Opening diameter: 101mm
Hole diameter: 114mm

Working by putting your hands inside the double structure,
This is an opening hole for working in areas that are hard to reach.
Apply silicone adhesive, etc., and then install and fix it.

【please note】
*Cannot be installed on the floor where you will step on it.

[Product specifications]
■Set of 1 each of plus (red) and minus (blue)
■Can be used up to 800 amperes.

[Applicable] The tip of the terminal (the thinnest part of the terminal)
Suitable for φ17.4mm positive type and φ15.8mm negative type.
■Can also be installed on types with bolts attached to the battery terminal.
■For D terminal
*Not available for positive type φ12.7mm and negative type φ11.1mm

A connector that can be connected to and removed from the battery terminal with a single touch.
Lift up the blue or red cap to loosen the terminal.
You can easily remove the wires from the battery. Attaching is the reverse operation.

■Material: Stainless steel (SUS316)
■Size
Total length 124 x stop hole ~ stop hole 54 x height 28 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 152 x stop hole ~ stop hole 57 x height 31mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 73 x height 38 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 84 x height 51 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).