Collection: New products

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 430 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

[Product Specifications]
■Material: Plastic
■Diameter: 180φ
Hole diameter: 16mm

●It is also possible to set up courses and float rope nets, etc.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Compatible with: For fishing boats up to 28FT (FB boats not available)
■Size: Diameter 90 x total length 140cm
■Weight: Approximately 1.8kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope with a diameter of 10 to 12 mm x 1.5 times the total length of the boat.

[Product specifications]
■Material: Plastic
■Diameter: 360φ
■Hole diameter: 23mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Plastic
■Diameter: 300φ
■Hole diameter: 19mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30cm.

【please note】
*Suruharu in the photo is not included.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 19mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

【please note】
*Suruharu in the photo is not included.

The 4FT rail has 10 rollers, allowing you to smoothly load and unload the boat.

●1 set of 2 pieces
●Size: Total length 1,220mm x width 101.6mm
●Roller diameter: 57mm
●Maximum loading weight: 1,135kg

【please note】
*The rollers may stop moving if you load a boat that is at the limit of its load capacity. Please use a moderate weight.
*To install 1 set of rails, 4 27269 mounting brackets (sold separately) are required (2 for each rail).

●By attaching this support before putting on the boat cover, you can make it easier to put on the cover.
Furthermore, the cover can be stretched while applying tension, which prevents rainwater from collecting on the cover.
●The cover support pole comes with three types of tip shapes: button, rubber holder, and thin rod shape, so it is a cover support pole that can be fixed in a variety of ways.

[Product specifications]
■Material: Aluminum
■Pole length: 91cm to 162cm
■Included: 3 types of adapters are standard equipment

●An eye plate with two-point fixation suitable for installation in places with limited installation space.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 76 x Width 22 x Height 25mm

●A navigation light mast made of rust-resistant stainless steel.

●The base part can be easily collapsed by loosening the knob, making it convenient for storing or passing under bridges.

-Pedestal dimensions: 57mmX95mm

- Total height: 450mm

●Pipe used: diameter 25φ stainless steel pipe

*The main body and navigation light installation screws are not included.

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: L552 x W375 x H267mm (*Height is up to the cap surface)
■Gauge is included with the main unit

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●A foldable, hanging type radar reflector.

[Product specifications]
■Material: Aluminum
■Dimensions: 215 x 215 x 280mm

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Support: Japanese boats up to 25FT, center console boats
■Size: Diameter 60 x total length 120cm
■Weight: Approximately 1.3kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope that is 8 to 10 mm in diameter x 1.5 times the total length of the boat.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-80
●Total weight: approx. 1.7kg
●Drug amount: 0.8kg
●Protection volume: 4 cubic meters
- Total height: approx. 265 mm, total width: approx. 97 mm, depth: approx. 102 mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 4 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4299
●Validity period: 6 years

*Includes recycling fee.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Since it is a powder ABC type with a pressure gauge, maintenance is easy!

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Total weight: approx. 1.1kg
●Drug amount: 0.3kg
- Total height: approx. 300mm x total width: approx. 78mm x depth: approx. 91mm
●Protection volume: 2 cubic meters
●Nominal sensing temperature: 95℃
●Emission time: Approximately 2 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4298
●Validity period: 6 years

*Includes recycling fee.

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

[Product specifications]
■Type: Wall-mounted type
■Body material: Plastic
■Size:
Length 345 x height 65 x depth 33mm
...
■Set of 2

● Gently secure the handle and tip of the rod with foam.
●The soft foam protects the rod from vibrations from the boat and prevents damage to the rod.
●Fix using the hole on the side of the plastic frame.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 610 x Width 450 x Height 255mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 575 x Width 355 x Height 330mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

■Size: Total length 180mm x 80mm
■Shaft diameter: Ф16.0mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

[Contents] 473ml
[Included] Hardening agent 22cc

●Used to fill in the traces of rounded parts of fiberglass.
●Contains fine glass fibers, so it is strong.
●It is characterized by fast drying, good workability, and strong resistance to water penetration.

[Contents] 946ml
[Included] Hardening agent 22cc
[Applications] Surface filling and leveling agent for wood, aluminum, iron, hulls, decks, etc.

●Can be used as a surface filling and leveling agent for FRP, wood, aluminum and iron at the top and bottom of the water line.
●Dries quickly and can be polished in about 30 minutes.
●Contains very fine spherical glass, making it easy to polish and level the surface.
●Can also be used for hulls, decks, and other parts.

[Contents] 510g
It can remove stubborn stains from aluminum, restore fading caused by oxidation, and polish at the same time.

●Removes rust, oxidation products, and corrosion products from metal surfaces such as stainless steel, brass, copper, chrome plating, and aluminum, restoring their shine.

●Capacity: 510g

[Contents] 3790ml
[Application] For stubborn stains (contains a compound with excellent cutting properties and polishing wax)

A compound-containing wax that is ideal for removing stubborn stains.
Contains a compound with excellent cutting properties and polishing wax to remove dirt, stains, rust, and faded areas on gel coated and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Inner capacity] 473m
[Application] For stubborn stains (contains a compound with excellent cutting properties and polishing wax)

A compound-containing wax that is ideal for removing stubborn stains.
Contains a compound with excellent cutting properties and polishing wax to remove dirt, stains, rust, and faded areas on gel coated and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 3790ml
[How to use] Depending on the dirt, use the undiluted solution or dilute it with water to a ratio of about 5:1.
[Application] For removing general to light stains (contains a compound with low machinability and polishing wax)
*Please use it on areas that cannot be removed with boat soap.

A compound-containing wax that is ideal for removing general to light stains.
Contains a low-cutting compound and polishing wax that removes dirt, stains, rust, and fading from gelcoat and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 473ml
[How to use] Depending on the dirt, use the undiluted solution or dilute it with water to a ratio of about 5:1.
[Application] For removing general to light stains (contains a compound with low machinability and polishing wax)
*Please use it on areas that cannot be removed with boat soap.

A compound-containing wax that is ideal for removing general to light stains.
Contains a low-cutting compound and polishing wax that removes dirt, stains, rust, and fading from gelcoat and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 2L
■Estimated peeling process: Approximately 5 square meters for 2L

【how to use】
After washing with water, dry the peeled surface and apply 441 as thickly as possible.
After leaving it for 15 to 20 minutes, use a scaler made of material (such as plastic) that will not damage the gel coat surface.
Remove any floating paint with a remover and finish by wiping this product completely with thinner, etc.

●A stripping agent for cleaning the base of the ship's bottom.
●A neutral type with little irritating odor, it is made of ingredients that are friendly to the human body and the environment, and will not damage the gel coated surface of FRP.

【please note】
When working, avoid closed rooms and do so in a well-ventilated area.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-150
●Total weight: approx. 4kg
●Drug amount: 1.5kg
●Protection volume: 8 cubic meters
- Overall height: approx. 475mm, overall width: approx. 110mm, depth: approx. 107mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 6 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport model No. 4142
●Validity period: 6 years

【please note】
*Recycling sticker is not attached.

This is a high-strength type hinge that uses stainless steel for the entire wall thickness. *This is not a type that is made thicker by bending a stainless steel plate.
We use SUS316 material that is resistant to rust and corrosion and maintains a beautiful shine.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Size: 105 x 27 x thickness 4mm

This is a high-strength type hinge that uses stainless steel for the entire wall thickness. *This is not a type that is made thicker by bending a stainless steel plate.
We use SUS316 material that is resistant to rust and corrosion and maintains a beautiful shine.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Size: 68 x 26 x thickness 4mm

[Product specifications]
■Type: Wall-mounted type
■Material: Stainless steel SUS304
■Size: Height 255 x 48mm
■Holder inner diameter: 40φ
...
■Mounting screws are not included.

There is rubber inside the holder to prevent the rod from being scratched.

[Product specifications]
■Type: Pipe mounting type
■Material: Stainless steel
■Size: Total length 250mm
■Holder inner diameter: 40φ
■Pipe diameter that can be installed: 19 to 27.2φ (mm)
...
Can be fixed in 360 degrees free position

A rod holder that can be easily attached to a pipe.
Has anti-scratch rubber on the inside of the holder.
The holder part is connected to the pipe fixture with a special metal fitting that can be fixed in any position 360 degrees, so it can be fixed in any convenient position.

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●Loop strap for Dutton PWC.
●Winch belt with small hook.
- Comes with a loop strap that is convenient for fixing the PWC without damaging it.

[size]
■Strap width: approx. 5cm, length: approx. 3.6m, stitch width: approx. 9.5cm
■Loop part: approx. 2.54cm, length: approx. 1.22m

● Compatible with Hull guard fender, PWC buoy, mark buoy (fender, buoy that uses 97560 nozzle)

●A hand pump for manually inflating air.

●Since the amount of air injected is small, please use it to replenish air when it leaks.

[Set contents] 3-piece set: main body, hose, and nozzle

■A manual fuel delivery pump that is convenient when starting an outboard engine.

■Compatible with hose inner diameter 3/8 (9.5mm)

[About the product]
Please note that the product color may differ depending on the arrival time.

The sophisticated aerodynamic design allows for efficient and smooth inflation.
It also has a design that makes it easy to hold with one hand, making it easy to handle.

Can be used with household AC100V or cigarette socket DC12V power supply.
It can inflate approximately 450 liters of air per minute. (Varies depending on temperature, usage conditions, etc.)
A floating ring with a diameter of 60cm can be inflated in about 30 seconds.

Three types of nozzles are included, so just set the nozzle according to the valve size.
It can be inflated smoothly.

■Power supply
1.DC12V (cigarette lighter plug) voltage/current DC12V/12A
2.AC100V (outlet plug) Voltage/Current AC100V/1.8A

■Continuous use time: Approximately 5 minutes (requires cooling for 15 minutes or more after use)
■Air flow rate: Approximately 450L/min *Varies depending on temperature, usage conditions, etc.
■Accessories: 3 types of nozzles, instruction manual (Japanese)

[Caution] It is dangerous to use the product in locations exposed to rain or seawater as it may cause electric shock.

●Foldable hanging type radar reflector.

[Product specifications]
■Material: Aluminum
■Dimensions: 300 x 300 x 415mm

●The brass lock (main body: made of brass) prevents theft, making it rust-resistant and durable.

●A set of 5 uses a common key, so you can lock all 5 with one key.

[Product specifications]
■Maximum capacity: 300Amp
■Flange diameter: 58.5mm
■With waterproof cap
*Detailed size is shown in the photo

●A simple toggle switch type battery switch.
●Can be used to supply and cut off battery power.
●The red switch lever can be removed.

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

●This is a spare horn for mini jet horn (product number: 60445).

●It's safe to have one as a spare in case you lose or damage the horn part.

Spare cartridge for mini jet horn (product number: 60445).
■Cartridge capacity: 200ml
■Cartridge diameter: approx. 53mm
■Cartridge part overall height: approx. 135mm
■Products not subject to fluorocarbon gas regulations

【please note】
This product does not include a horn.

●This is an air horn that makes a loud sound of about 108 decibels just by pressing it.

-A set of 1 bugle part and 2 cartridges. We also sell cartridges only (product number: 60446, ¥1,785), so they can be used repeatedly.

●Cartridge capacity: 200ml/1 bottle

●Intermittent pronunciation time: Approximately 20 minutes
*Intermittent sounding time is the total time it takes for the cartridge to empty after the sound is played several times. Please use this as a guideline as it will vary depending on usage conditions such as external temperature.

*The continuous sounding time is approximately 1/4 of the intermittent sounding time. This is because the temperature inside the cartridge decreases due to sound production, and once the cartridge returns to room temperature, it can be used again.

●The continuous sound time is approximately 1/4 of the intermittent sound time. This is because the temperature inside the cartridge decreases when the cartridge is sounded, and when the cartridge returns to room temperature, it can be used again.

●Products not subject to fluorocarbon gas regulations

●Sound pressure: Approximately 108 decibels

●Basic frequency: 500Hz(+-)30

●Cartridge diameter: approx. 53mm

-Cartridge part overall height: approx. 135mm

●Horn diameter: approx. 60mm

-Horn part total length: approx. 150mm

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.