Collection: New products

[Application] For corrosion prevention and rust prevention
[Contents] 350g

Effective in preventing corrosion and rust of engine parts during storage.
This is especially effective when storing for long periods of time.

SEADOO genuine product

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

[Capacity] 946ml x 12 bottles (case)

●Synthetic blend oil for ROTAX 4-TEC engines
●Developed to maximize the clutch performance of superchargers,
●Provides reliable engine durability even when the slot is fully open and under harsh conditions.

*Please be sure to use this oil for supercharger (SC) models.

The belt wound inside the housing can be stretched to the desired length, hooked onto the transom handle (eye) of the boat, etc., and wound and secured with a ratchet.
Unlike regular tie-down belts, there is no need to take the time to attach and detach them from the trailer every time.
Secure it to the rear of the trailer using the mounting brackets.

●Material: Stainless steel (metal parts)
●Contents: 2 pieces in 1 set ●Belt width: 48mm x length ~900mm
Load capacity: 3000LBS (1360kg)/2 pieces

[Note]
*The hooks in the image do not come with mounting brackets (sold separately). Example of using a multi-hook from another company (SRX-143L, SRX-143R)

A cost-effective vest with a combination of soft neoprene material and a zipper on the front side that emphasizes the fit.
The neoprene material on both sides prevents chafing and is comfortable to wear.
It has a simple design that is easy to put on and take off.

OK as a marine sports vest for towing play such as wakeboarding, SUP, and banana boats!
Free one size

■Applicable chest size: Approximately 90-100cm

■Material: Chloroprene fabric PE foam, polyester, polyurethane

[Caution] This product is not applicable for ship inspections and is intended to assist with buoyancy during leisure activities in Shinagawa or the sea.
This is not a marine rescue life jacket approved by the Ministry of Land, Infrastructure, Transport and Tourism.

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports Vest Impact Vest Segment

Made of PU (polyurethane) material, it is soft to the touch.
Protects from accidents such as shin guards.
hitch ball cover

■Material: PU material
■Correspondence:
Ball size 1-7/8 inch / 2 inch common

Can also be used for SOREX, TIGHTJAPAN, and blast trailers!

●Applications: license plate lights, side markers, backlights, etc.
●Mounting screws are not included. Please prepare separately.
●Equipped with 4 LED lights
-Size: 52 x 101 x 27mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■As it is made of stainless steel, it is a rust-resistant item. (Brass steel inside the cylinder)

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

■It is attached to the mount socket of the hitch member, and the ball mount can be attached with the cap attached.

■Openable cover cap.

■Compatible with: Class III (50×50mm square type)

■Material: Made of ABS

■In addition to fixing the jet handle pole, you can also freely adjust the length with the stopper part.

■Length: 100cm

●You can add hooks to trailers and trucks that do not have side hooks and hang fixed hooks such as tie-down belts.

●Clamp width up to 45mm.

●Steel PVC coating

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-24
■Current consumption: 24V/2.5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-12
■Current consumption: 12V/5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 525 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

■Compatibility: 3/8” hose 8902-7 (17660-ZV5A00) for Honda outboard motors
■Compatible with 9.5mm inner diameter hose

Fitting for outboard motor fuel tank hose
Secures to a 9.5mm inner diameter hose with an optional clamp.
It can be attached and removed with one touch to the tank side fitting.

*The fitting for the outboard motor side is part number: 99522.

■Compatibility: 1/4” NPT 8901-7 (16977-ZV5A00) for Honda outboard motors
■Tank part screw size: 1/4 inch outer diameter 13mm

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Compatibility: For Honda outboard motors (from 2001) 3/8” hose 8900-7 (17650-ZW9-003)
■Compatible with 9.5mm inner diameter hose

By installing this fitting, the connection to the fuel tank can be installed and removed with one touch.
It is used by securing it to a hose with an inner diameter of 9.5 mm using a clamp.

*The fitting for the tank side hose is part number: 99524.

【please note】
Can only be used with square hole type outboard motors.
Please note that some Honda outboard motors manufactured before or around 2001 have round holes instead of the square holes shown.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Suzuki outboard motors (75hp or more) 1/4” NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Type: Hose side fitting (for diameter: Φ13mm)

■Compatibility: For Suzuki outboard motors (75 HP or more) 3/8” hose

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

●Anchor for trolling from rubber boats to small boats.
●You can adjust the size of the outlet and the binding part of the opening, so you can easily adjust the effectiveness. A stainless steel thimble is used to remove the twist.

■If it is too effective: Tie the eyelet between the hanging ropes at the opening. Narrowing the opening reduces effectiveness.
■When the effect is weak: Please tie the drain eyelet. Closing the drain will make it more effective.

【Product Specifications】
●Support: 16-20 Fort Boat
●Size: Maximum opening diameter 75φ x total length 150cm

【please note】
*The rope that connects the sea anchor and the boat (towing rope) is not included.
*Please prepare in advance before use.

●Anchor for trolling from rubber boats to small boats.
●You can adjust the size of the outlet and the binding part of the opening, so you can easily adjust the effectiveness. A stainless steel thimble is used to remove the twist.

■If it is too effective: Tie the eyelet between the hanging ropes at the opening. Narrowing the opening reduces effectiveness.
■When the effect is weak: Please tie the drain eyelet. Closing the drain will make it more effective.

【Product Specifications】
●Compatible with: Rubber boats to 16-foot boats
●Size: Maximum opening diameter 45φ x total length 100cm

【please note】
*The rope that connects the sea anchor and the boat (towing rope) is not included.
*Please prepare in advance before use.

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 3780ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

Gear cases, pumps, heat exchangers, compressor engines, etc.
A liquid sealant that can be used as a molded gasket for all types of metal flanges.
It can seal leaks caused by surface scratches, damage, small distortions, etc.
Solved the problem of molded gaskets sagging, eliminating the need for retightening.
Improves the rigidity of the flange joint.

●Contents: 50ml
●Operating temperature (℃): -55 to 150

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

medium strength 243

●Contents: 50ml (liquid type)
●Recommended screw diameter: M6 to M20
●Breakdown/Escape Torque (N・m): 20/7
●Temperature range (℃): -55 to 150
●Color: Blue

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 33mm
■Total length: 76mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 32mm
■Total length: 84mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Material: Plastic resin
■Size: Width 162x Height 42x Depth 65mm

●Resin handle that can also be used as a step.
●Fix to the transom etc. with screws, etc.

[Contents] 16L
●Thinner exclusively for ship bottom paint SEAJET 033, 034, and 035.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 61mm
■Maximum thickness when inserting flange: 43mm
■Effective length of hose insertion part: 37mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 200mm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel (galvanized finish)
■Maximum load: 679kg
■Stroke: 250mm
■Wheel diameter: Approximately 20cm
■Material of tire part: Made of resin