Collection: 新商品

■Bolt size AxBxC: 63x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

[Ordered products]

■Roller width: 220mm
■Bracket dimensions: 195x120x168mm (width x height x depth)
■Material: Steel

[Support] From light to small size standards
*When used on a 4-seater PWC, only the hull will be protected.

Protect your precious boat with its trailer.

By completely covering the boat and trailer, it is difficult to tell that it is a boat at first glance.
Also recommended for crime prevention!
A trailer cover with a specially designed logo that is suitable for everything from light standards to small vehicle frames.
Made of Oxford 420D fabric with excellent strength, abrasion resistance, and quick drying.
■Size: Total length 5010mm x height 1400mm

[Disclaimer]
Please note that the design and color may change depending on the arrival time.

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

●For adjustable tower (75x45) ●When moving the trailer, use the carry handle for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when in a low position!

■Material: Steel ■Includes: Reinforcement stay, chain wire & electrode connector holder included.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

●For adjustable tower (75x45)
●When moving the trailer, the carry handle allows for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when sitting in a low position!

■Material: Stainless steel
■Includes: Reinforcement stay, chain wire & electrode connector holder included.

●When moving a trailer, it eliminates the inconvenience of not having a place to hold it or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Stainless steel

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

For W-MAX

●Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Steel
■Can be installed in two directions: front and back

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

■Material: Stainless steel
■Includes: Chain & electrode connector holder included
[Place of use] Attached to the triangular gathering part or coupler part, mainly used for 2-boat loading.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

■Material: Stainless steel ■Attachments: Chain & electrode connector holder included [Usage location] Attached to the triangular gathering part or coupler part, mainly used for 2-boat installations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

TIGHTJAPAN Chubby Air Pump

Related products [Product number: 0715-92] Chubby body + pump set [Product number: 0715-91] Chubby body only

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

It is a must-have item for touring, as it can be used as a marker when floating, or as an airbag when placed in a box.
By eliminating space in the storage box, damage to the inside of the storage box is reduced.
You can also use it as a floating marker to see your anchoring point at a glance.

*Also available for sale individually.
[Product number: 0715-91] Chubby body [Product number: 0715-93] Pump

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

●Chubby body only

It is a must-have item for touring, as it can be used as a marker when floating, or as an airbag when placed in a box.
By eliminating space in the storage box, damage to the inside of the storage box is reduced.
You can also use it as a floating marker to see your anchoring point at a glance.

*Value sets are also available.
[Product number: 0715-92] Main unit + pump set [Product number: 0715-93] Pump only

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

A mega-sized duck-shaped floating marker.

Just by attaching it, you can see the anchoring position at a glance, and it also helps prevent the rope from getting entangled.
Please use as a set with rescue anchor rope.
Cute and funny characters are popular.

■Size: Approx. 35 x 35cm

【be careful】
If the rope is not made by TIGHTJAPAN, the marker may not be stable.
*The rope in the image is sold separately.

mooring jet ski PWC personal watercraft ship boat ship anchor rope mooring marker landmark watercraft personal watercraft

For 2 inch coupler, total length 2m

This is an extension coupler for when you cannot go to the water's edge. *You cannot drive with the coupler extend installed. *For Max trailer only.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 45mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 40mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 30mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

[Reservation item]
Out of stock from manufacturer, scheduled to be restocked after April

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 16 mm (within +-3 mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 25mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

This is the most basic form of limescale pumping.

[Product specifications]
■Material: Made of floating polyethylene
■Size: H85 x W140 x D190mm

【please note】
*Please note that the color may differ from the photo depending on the arrival time.

You can easily load and unload the important parts of the trailer, such as the axles and electrical components, without submerging them in water. The newly designed mount part for Lopros uses resin parts to improve operability when sliding, and is lightweight and compact, allowing for a wide variety of customization combinations.

After the rear ladder is stored, the rear part is secured with a pin for safety.

■Common for light and Lopros ■Made of steel ■Designed exclusively for Max trailers

【please note】
■Cannot be installed on 2-boat and regular cars.
■Adjustment may be required for wood rail specifications.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping fee is for each item.

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

●By adding "stop" to "hang" on the hook part, it is possible to prevent the hook from falling when it is fixed, making it easier and more secure to tie down.

●Belt width: 25mm, Fixed side belt length: 300mm, Winding side belt length: 3,200mm

●For fixing in places with no tightening allowance or in narrow places.
●Since there is no hook, lashing around the perimeter is very convenient.

●Width 25mm x length 1,455mm

■Material: Stainless steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items".

■Material: Steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items"

●Loading the beach stand on a trailer reduces dirt and scratches inside the vehicle.

●It is also possible to install the separately sold side storage box (product number: 0704-21, 0704-22) [see image below].

<set content>
Main body, U bolts (4 50x50mm, 2 75x50mm), transom tie down, universal hook

■Size: Height 760 x Width 360 x Depth 315mm

■Material: Stainless steel
■Sales unit: 1 piece

[For small cars with wire brake only]

●Size A:490 B:750 C:985 D:50-150 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●Size A:490 B:680 C:830 D:125 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●A retractable stand bar to prevent falls and damage to the license plate when washing the car without connecting the trailer to the car or maintaining the jet.

●Equipped with rubber that prevents rattling and chattering noises when running, making it extremely quiet.

■Material: Steel plating
■Mounting plate and bolt set included
*Maximum 50cm

■Foldable type
■Material: Steel
■Maximum load: 360kg
■Stroke: 280mm
■Tire diameter: 140mm

Tire & base only *The base part has been changed to black.

■For TIGHTJAPAN stopper jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, stroke amount: 280mm

[The base part has been changed to black]

●Aluminum wheels and handles have grill nipples, so regular lubrication will ensure smooth operation.
●The tires are made of soft rubber and can be moved more quietly.
●Can be removed from the wheel and replaced. [Product number: 0702-01 Replacement tire base]

[Product number: 0702-00]
■Foldable type
■With stopper

■Material: Aluminum
■Maximum load: 360kg
■Stroke: 280mm
■Wheel diameter: 150mm

■Quantity: 1 piece
■Seal inner diameter: 31mm
25φ, 28φ: For light vehicles

■ Quantity: 1 piece
■For shaft Φ35

*Please prepare your vehicle inspection certificate and measure the dimensions of your hub before contacting us. We may use it for the inner or outer hub.
.

*Hub seal is sold separately [part number 0605-10].

■Quantity: 1 piece
■For shaft Φ28

【please】
*Please let us know if you are using it for innerwear or outerwear.
*For hub seals, please prepare your vehicle inspection certificate, etc., and then contact us after measuring the actual product you have.

■1 set for left and right [for one car]
■U bolt and parking brake set

■Quantity: 2 pieces 1 set
■Support: Common for regular cars and light cars