Collection: mooring equipment

●Type approved product
-Size: 50 x 400mm, set of 2

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●12φ×50m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●12φ×40m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●12φ×30m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●10φ×50m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●10φ×40m

●This anchor rope is made of spun ester, which has excellent weather resistance and strength.

●One end is thimble-finished and has one steel shackle.

●It is a triple-stranded rope.

●10φ×30m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●8φ×40m

●Anchor rope made of spun ester with excellent weather resistance and strength.

●The tip of one side is thimble-processed and comes with one steel shackle.

●It is a three-pronged rope.

●8φ×30m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-way rope.

●20φ×20m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●12φ×27m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●12φ×10m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●10φ×21m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●10φ×10m

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●8φ×18m

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.

[Product Specifications]
■Material: Plastic
■Diameter: 180φ
Hole diameter: 16mm

●It is also possible to set up courses and float rope nets, etc.

[Product specifications]
■Material: Plastic
■Diameter: 360φ
■Hole diameter: 23mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Plastic
■Diameter: 300φ
■Hole diameter: 19mm

●You can also set up courses and float rope nets.

●An eye plate with two-point fixation suitable for installation in places with limited installation space.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 76 x Width 22 x Height 25mm

● Compatible with Hull guard fender, PWC buoy, mark buoy (fender, buoy that uses 97560 nozzle)

●A hand pump for manually inflating air.

●Since the amount of air injected is small, please use it to replenish air when it leaks.

[Set contents] 3-piece set: main body, hose, and nozzle

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

■Material: Stainless steel (SUS316)
■Size
Total length 124 x stop hole ~ stop hole 54 x height 28 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 152 x stop hole ~ stop hole 57 x height 31mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 73 x height 38 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 84 x height 51 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 308 x stop hole ~ stop hole 122 x height 68 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

[Product specifications]
■Material (float): PVC foam
■Float body (per piece)
Size: 141φ×175mm
Hole diameter: 25φ
...

■Rope
Size: 12φ×2m

[Float x 3] + [Rope]
●This is a fender that uses egg-shaped vinyl chloride foam in three rows.
●Float body material: PVC foam

CASTRO
Castro Fender was born in Spain in the early 1970s by founder Carlos Castro.
Castro is now one of the world's largest manufacturers of buoy fender floats.
Our products are sold in over 70 countries around the world and are widely praised for their outstanding quality and innovative design.

■Size: Diameter/Total length/Eye diameter
A-0HD: 200mm / 270mm / 25mm
A-1HD: 290mm / 370mm / 25mm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it extremely durable. ,
●Can also be used as a course buoy if installed upside down.
●You can easily inflate with an air compressor or air gun.

【please note】
*Air injection nozzle not included *Delivered with air removed *As this is an overseas product, specifications may change without notice.

[Product specifications]
■Material: Nylon ■Rope diameter: 1/2 (12.7mm)
■Length: 200ft (60m), 300ft (90m)

An easy-to-handle nylon triple rope with excellent abrasion resistance, strength, and flexibility.

■Material: Stainless steel

■Size: A total length 304 x B stop hole ~ stop hole 100 x C height 70 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 254 x B stop hole ~ stop hole 93 x C height 68 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 203 x B stop hole ~ stop hole 71 x C height 53 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 152 x B stop hole ~ stop hole 75 x C height 45 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 126 x B stop hole ~ stop hole 54 x C height 39 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

●Please use when mooring to a pier or quay.

●It is recommended to use 4 pieces per boat instead of 2 pieces on each side.

●Split structure so that the fender follows the hull.

●Comes with a rubber stopper and rubber coated hook to allow it to be installed in a variety of locations, and a belt cushion to prevent scratches from rubbing between the fender belt and the hull.

●Size: 10.2x31.8cm

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 210 x stop hole ~ stop hole 53 x height 40mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.