Collection: consumables

[Fits] YAMAHA
GP1800
FX SVHO / FX CRUISER SVHO
FZR SVHO / FZS SVHO
FX SHO
FX CRUISER SHO

[Set contents]
[1] YAMALUBE 4W (10W-40) genuine oil 4L x 1 bottle [2] Aftermarket oil element (part number: JL012)
[3] JETRENU PURPLE (JR-1001) 473ml×1

■ Class 4 petroleum, danger level 3
■API grade: SJ grade SAE10W-40
It has high viscosity characteristics and is better than YAMALUBE-SL oil.
This is a high-quality oil that has high oil film retention at high revolutions and low evaporation loss.

■JR-1001 JETRENU PURPLE Detailed Cleaning & Waxing. A small amount produces an amazingly rich lather, removing dirt from boats and trailers, achieving a glossy finish and providing long-lasting UV protection.
We recommend that you start with the 473ml size, which is just the right amount to use up in one season.

[Uses] Jet skis, cars, boats, motorcycles [Uses/Effects] Cleaning & waxing. Provides a glossy finish and lasting UV protection. [Contents] 473ml (enough for approx. 15 jet ski washes/30ml each time). (When used)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water and polish the hull with a sponge or soft brush. If using a foam gun, dilute it to your desired ratio.

[Notes]
1.Keep out of reach of children.
2. Please protect your body with gloves, mask, goggles, etc. when using the product.
3. If swallowed, drink a glass of water and seek medical attention.
4. If the product gets into your eyes, rinse immediately with plenty of water.
5. If it gets on your skin, wash it off immediately.

[Disclaimer]
*Package design may change without notice.

[Compatible] KAWASAKI
ULTRA 310 (14-)
ULTRA 300 (11-13)

■Set contents [1] Kawasaki genuine R4 oil (J0148-0002-1) 4L x 1
[2] Kawasaki Genuine R4 Oil (J0148-0001) 1L x 1
[3] Aftermarket oil filter (JL013) x 1 (equivalent to 16097-0007)

Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work being done, more than 5L may be lost.
In that case, please prepare Kawasaki R4 SG10W-40 oil separately.

[Adaptation] SEADOO
300 horsepower /
2018 models below 260 horsepower
(*Excluding Spark/GTI90)

【Guidance】
*Models before 2017 other than those listed above → Product number: OIL-SD1503-S

■Set contents
[1] Synthetic blend oil 946ml [Product number: 779133A] x 3
[2] Aftermarket oil filter (with O-ring) [Product number: JL009-300] x 1
[3] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Tank capacity 5.0L
*Usually the amount required for oil change is 2.7 to 3L. Depending on the content of the work, more may be removed.
In that case, please prepare Synstick Blend Oil [Product Number: 779133A] separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
BRP SEADOO 4-stroke model (2018 or later) / SPARK(※)
*Not compatible with all '18 -'20 RXP-X / '18: GTI, GTR / '16-'17 SD models.
*Please use 30 for 4-stroke models up to 2015.

【set content】
1.MOTOBATT battery (MBTX20U)
2.Battery charger (MBPDCWB)

【compatibility】
■Yuasa:
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB, YB16BCX,
GT16L-BS, GT16BS, CTX19-BS CTX19L-BS , GYZ20H, GYZ20L, GYZ20HL,YTX20L-BS,YB16CL-B
■DEKA: ETX16, ETX16L, ETX20, ETX20L
■ODYSSEY: PC535, PC625

【Product Specifications】
MBTX20U
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 310 A
■Capacity (10HR) 21 Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[Compatible] KAWASAKI
ULTRA 310 (14-)
ULTRA 300 (11-13)

■Set contents [1] Kawasaki genuine S4 oil (J0146-0012-1) 4L x 1
[2] Kawasaki Genuine S4 Oil (J0146-0011) 1L x 1
[3] Aftermarket oil filter (JL013) x 1 (equivalent to 16097-0007)

Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work being done, more than 5L may be lost.
In that case, please prepare Kawasaki S4 SG10W-40 oil separately.

■Additive for storing fuel in a marine jet for long periods of time, such as during the winter.
■Prevents gasoline deterioration and keeps the fuel system clean and suppresses corrosion.
■A must-have item for 4-stroke and catalyst models!
■Made in the USA
■Capacity 355ml (12oz)

■Category 4, 2nd petroleum, danger level 2
■Flash point: 11.0℃, boiling point 82.2℃

[How to use]
Add 3 ml of this agent to 1 liter of gasoline.
If stored for more than 2 months,
Add 8 ml of this agent to 1 liter of fuel, fill up the tank, start the engine, and circulate combustion through the fuel system.

[Correspondence] KAWASAKI
ULTRA310(14-)
ULTRA300(11-13)
ULTRA LX(12-)
1500SX-R(17-)
STX15F(14-)

■Set contents
[1] Kawasaki genuine S4 oil (J0146-0012-1) 4L x 1
[2] Kawasaki genuine S4 oil (J0146-0011) 1L x 1
[3] External oil filter (JL013) x 1
[4] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work involved, more than 5L may come out.
In that case, please prepare Kawasaki S4 SG10W-40 oil separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Correspondence] KAWASAKI
ULTRA310(14-)
ULTRA300(11-13)
ULTRA LX(12-)
1500SX-R(17-)
STX15F(14-)

■Set contents
[1] Kawasaki genuine R4 oil (J0148-0002-1) 4L x 1
[2] Kawasaki genuine R4 oil (J0148-0001) 1L x 1
[3] External oil filter (JL013) x 1
[4] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work involved, more than 5L may come out.
In that case, please prepare Kawasaki R4 SG10W-40 oil separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Contents] 454g

●Belray Water Resistant Grease is completely water resistant even to salt water, and can be applied to wheel bearings, bushings, and chassis lubrication points to provide the best lubrication and corrosion resistance.

●It can be used for many purposes, and has water resistance, heat resistance, excellent rust and corrosion resistance, load capacity, impact resistance, and abrasion resistance.

●This product is a high-performance general-purpose grease manufactured with an aluminum composite and barium composite structure.

●Meets all bearing lubricant needs for jet, trailer, marine, automobile, motorcycle, snowmobile/ATV applications.

●Can also be used for trailer wheel bearings on boat trailers and caster wheels on snow blowers where salt resistance and water resistance are essential.

●Provides maximum long-term protection from wear, rust, water washout, etc.

●NGL viscosity grade #2

It is highly corrosion resistant and protects exposed metal parts against salt water.
This is an anti-corrosion grease with particularly excellent adhesion properties that is mainly composed of a special polymer.
The special polymer forms a strong lubricating film that prevents softening even when water or seawater gets mixed in.

[Contents] 50g
[Grade] Consistency No.0 (355-385)/Softer than Grease A
[Application] Lubrication of propeller joints of outboard motors

All-purpose grease using urea-based thickener. (Improved heat resistance)
Excellent high temperature, durability and rust prevention (water separation properties).
Improved salt water resistance for marine use.

[Contents] 200g Water resistant
[Grade] Consistency No.2 (265-295) Dropping point 250℃
[Applications] Outboard motors that are penetrated by water/seawater, etc., and those that require water sealing properties.
For rotating and sliding parts of machines such as motor drive shafts.

●Anti-corrosion penetrating lubricant for ships (grease type)

●A grease with excellent water resistance developed for marine use.

●We promise to improve the rust prevention and lubrication functions of sliding parts over a long period of time. Also, since it is a spray type, you can easily grease the details without getting your hands dirty.

●Applications: Various blocks of equipment - Sliding parts of shackles, etc. - Rotating and sliding parts of winches, etc. - Rotating shafts of hand starters for outboard motors - Crap screw parts, etc. - Other sliding parts that may be exposed to seawater. For rust prevention and lubrication of parts, etc.

●Capacity: 280ml

●Ingredients: Mineral oil, petroleum solvent, rust inhibitor

●Third petroleum type 140ml/Danger class III

■Newly adopted 2WAY nozzle! It can be used in two ways: diffusion and spot nozzle.
■With excellent water displacement properties, it can penetrate under seawater and form a waterproof film with just one spray.
■Excellent performance as a moisture barrier, penetrant, and lubricant.

■Capacity: 480ml

A product developed for FRP.
This is an innovative polish that contains high-grade silicone wax and an ultra-fine particle compound that does not affect the material.
Deterioration of gel coat color, stains due to adhesion of marine organisms, etc.
It cleans off raindrops, water scale, etc. that adhere to the hull, and then applies a wax effect on top of it.

■Capacity: 500ml

Developed for FRP and specially formulated with ultraviolet absorber to protect against ultraviolet rays.
It is most effective for boats that are submerged in seawater and constantly exposed to sunlight, wind and rain.

[Application] Polishing the bottom of a ship, hull, etc. For rust prevention and polishing of various fittings and metal parts.

■Contains ultra-fine particle compound
■Capacity: 300g

Gear oil ideal for stand drive gears that transmit high power.
Demonstrates excellent effectiveness in suppressing pitching that occurs in gear parts when used for long periods of time.
Enables longer gear life.

■Grade: GL-5 #90
■Danger class 3, class 4 petroleum

■Capacity: 800ml

X-ALL Grease

● Contents: 220g

[Applications] Multi-purpose rust inhibitor for corrosion prevention and rust prevention.
[Contents] 400g

A multi-purpose rust inhibitor that penetrates quickly and prevents rust and corrosion.
Suitable for use in seawater and humid environments.
Highly recommended for maintenance inside the engine after using PWC.

SEADOO genuine product

A multi-purpose grease containing Teflon that is highly waterproof and difficult to dissolve in water.

● Contents: 400g

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

Spray solvent to clean the outside of the engine.
Used to remove dirt such as grease and oil.

Contents: 400g

[Application] For corrosion prevention and rust prevention
[Contents] 350g

Effective in preventing corrosion and rust of engine parts during storage.
This is especially effective when storing for long periods of time.

SEADOO genuine product

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

[Capacity] 946ml x 12 bottles (case)

●Synthetic blend oil for ROTAX 4-TEC engines
●Developed to maximize the clutch performance of superchargers,
●Provides reliable engine durability even when the slot is fully open and under harsh conditions.

*Please be sure to use this oil for supercharger (SC) models.

[Inner capacity] 473m
[Application] For stubborn stains (contains a compound with excellent cutting properties and polishing wax)

A compound-containing wax that is ideal for removing stubborn stains.
Contains a compound with excellent cutting properties and polishing wax to remove dirt, stains, rust, and faded areas on gel coated and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 473ml
[How to use] Depending on the dirt, use the undiluted solution or dilute it with water to a ratio of about 5:1.
[Application] For removing general to light stains (contains a compound with low machinability and polishing wax)
*Please use it on areas that cannot be removed with boat soap.

A compound-containing wax that is ideal for removing general to light stains.
Contains a low-cutting compound and polishing wax that removes dirt, stains, rust, and fading from gelcoat and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

A coating agent containing fluorine-modified silicone.
For protecting and polishing gel coat surfaces of boats and PWCs!
For reproducing black color and polishing resin moldings and gunwales!

■Construction guideline
Aerosol 420ml, application area: approximately 3 to 5.24 feet 2 bottles for ships, 1 bottle for PWC
■Construction method
1. Remove dirt and debris from the area to be applied with a cleaning agent and dry.
2.Apply Marine Glass Coat and spread it over the entire surface using a cloth such as a microfiber cloth.
3. Let it dry at room temperature for about 3 to 8 hours.

●Marine Glass Coat is a coating agent for ship hulls that contains fluorine-modified silicone.
●By forming a glass-like film on the gel coat or painted surface, it creates a glossy luster, and
The water repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It cures easily at room temperature, so you can easily apply the coating yourself.
It can be used for FRP, so it can be used not only for boat hulls but also for camper shells etc.

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual