Collection: Boating Supplies

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
Red is a limescale remover. Cleans stubborn water stains caused by hard water from seawater, lakes, and rivers that have accumulated on the surface.

[Application] Water scale removal
[Contents] 473ml
[How to use] First, rinse the surface with water to remove any rough dirt.
Spray a generous amount onto the surface and rub in a circular motion for 20-60 seconds.
Then rinse with water. We recommend using it twice for stubborn water stains.
*Never use on aluminum or alumite processed products. It will damage the paint.
*Do not leave it unattended with it applied to the surface.
*Please be sure to test on an inconspicuous area before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! A cleaning item series born in California.
Different colors have different uses, making daily cleaning fun.

This product "CLEAR" is a glass cleaner. It is effective against oil stains and can easily and evenly wipe off dull stains such as hand marks on glass surfaces. It can also be effectively used on plastics, enamel, etc.

[Contents] 473ml
[How to use] Spray on the area you want to clean and wipe with a soft cloth such as microfiber.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it gets on your skin, wash it off.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! This is a cleaning item made specifically for jet skis and boats that was born in California. Different colors have different uses to keep the hull beautiful.

Yellow is an oil cleaner that is ideal for areas with heavy oil stains.
Made with a special surfactant and alkaline builder that does not harm engine metal parts, it can easily and quickly clean oil and grease from solvent tanks, etc.
Also available for wheels, rims, and inboard/outboard motors.

[Contents] 473ml
[How to use] Spray directly on the area you want to clean and leave for 60 seconds.
Then wash it off with a high-pressure washer.
If a high-pressure washer is not available, use a soft brush, etc. to scrub and rinse.
*Do not use on aluminum parts or anodized parts. It will damage the paint.
*Do not leave it on the surface or allow it to dry. It will damage the paint.
*Be sure to test it in an inconspicuous place before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

■Material: T bolt, nylon nut all made of stainless steel

[Product specifications]
■Tightening range/clamp width/quantity

JL52-635714: 63.5~71.4mm / 19.0mm / 1 piece
JL52-826905: 82.6~90.5mm / 19.0mm / 1 piece
JL52-11431222: 114.3~122.2mm / 19.0mm / 2 pieces
JL52-15241651: 152.4~165.1mm / 19.0mm / 1 piece

Definitely recommended for models with a supercharger.
Traditional hose clamps will collapse if you tighten them too much, and fall out if you don't tighten them too much...
There was such a problem, but the tightening torque can now be managed.

With heavy duty high torque clamp,
Boasts torque performance more than three times that of normal worm gear clamps.
It is mainly used in exhaust and intake areas where vibration is likely to occur.
Tighten the T-bolt with a lock nut, so you don't have to worry about it coming loose.
It also has a structure that tightens the hose evenly, so you can grip the hose firmly.

The bolts and nuts are also made of rust-resistant SUS.
The nut uses a stainless steel nylon nut that is hard to loosen.
Adopts a ROLLED-EDGE design (R processing on both ends of the band makes it difficult for the hose to get wedged).

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

The small body makes it convenient for use in narrow spaces.

[Material]
■Body part: Zinc
■Bolt part: Steel
[Size] Approx. 55 x 40 x 13 (mm) ■Clamp size: 20 (φmm)
[Contents] 1 pair (2 pieces)

[Application] Used to stop hose lines.

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

[Applicable] Hose inner diameter 16 to 18φ
[Size] Inner diameter 14mm Threaded part outer diameter 26mm

The models below can be easily connected to a water hose with a hose adapter.
SEADOO
●Models equipped with 951 engine (RX, XP, GTX, etc.)
●GTX4-TEC ~RXT

*This is the same product as the conventional GES0616 gray.

[Applications] A highly versatile puller that can be used for pulling out steering wheels, flywheels, motorcycle crankcases, gears, etc.

[Usage range] 38-96(mm)

[Tools used] 14mm wrench (*not included)

[set content]
・1 puller body
・1 center screw
・3 center screw adapters
・3/8” (24TPI) x 1-1/2” puller bolts 3 pieces
・3/8” (16TPI) x 2” puller bolts 3 pieces
・3/8” (16TPI) x 3” puller bolts 3 pieces
・2 3/8” (16TPI) x 4-1/2” puller bolts
・2 5/16” (18TPI) x 6” puller bolts
・3 5/16” (18TPI) x 3-1/2” puller bolts
・2 5/16” (24TPI) x 3” puller bolts
・3 5/16” washers
・2 1/4” (28TPI) x 2-1/2” puller bolts
・2 1/4” washers
・M10 (P1.5) x 35mm puller bolt 3 pieces
・3 10mm washers
・M8 (P1.25) x 45mm puller bolt 3 pieces
・M8 (P1.25) x 65mm puller bolt 2 pieces
・M8 (P1.25) x 90mm puller bolt 2 pieces
・3 8mm washers

NGK Spark Plug DR7EB for HONDA BF40D, BF50D Outboard Motors

[DR7EB compatible models] BF40D, BF50D

● Sold in single units
*The image is an illustrative image.

NGK Spark Plug DR7EA for HONDA Outboard Motors

[DR7EA compatible model]
BF25A/BF25D/BF30A/ BF30D(2003-)/BF35AM/BF40A, BF45AM, BF50A4/BF75A, BF90A

● Sold in single units
*The image is an illustrative image.

NGK spark plugs for outboard motors

[DCPR6E compatible models]
SUZUKI DF9.9/15 ('98-'03)
DF25/30 (3-cylinder)
DF40/50
DF40A/50A/60A
DF70A/80A/90A

● Sold in single units

SUZUKI DF2

NGK spark plug for outboard motors

[CR6HSA compatible model]
SUZUKI DF2

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug for outboard motors

[CR6E compatible model]
DF8A/9.9A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK Spark Plug CR5EH-9 for HONDA BF8D, BF9.9D, BF15D, BF20D (2000-) Outboard Motors

[Compatible with CR5EH-9]
BF8D, BF9.9D,BF15D, BF20D(2000-)

● Sold in single units
*The image is an illustrative image.

NGK spark plug CR4HSB for HONDA BF2D outboard motor

[CR4HSB compatible model]
BF2D(2000-2015)

NGK spark plugs for outboard motors

[CPR6EA-9 compatible model]
SUZUKI DF5 ('11-)
DF5A/6A
DF9.9/15 ('11~)
DF9.9/15A/20A
DF25A/30A

● Sold in single units
*The image is an illustrative image.

●Movable type with 360° angle adjustment
●Fix the bracket to the pipe or wall, and tighten the bolt that fixes the rod holder and bracket at any position to fix the rod holder at the most convenient angle.

[Product specifications]
■Type: Pipe mounting type
■Material: Plastic
■Size: Total length approximately 210mm
■Holder inner diameter: 45φ
■Pipe diameter that can be installed: 21 to 25φ (mm)
■Can be fixed at any 360 degree angle

This is a fitting that is attached to the outboard motor fuel tank to take out the fuel.

■Compatibility: For Suzuki outboard motors (75hp or less)
■Tank part screw size: 1/4”NPT
■Caliber: 11mm

[Product specifications]
■Material: PVC
■Size:
Diameter: 140mm
Length: 510mm
Rope hole diameter: 12.7mm

■Applicable boat size guide: 10-20f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

[Product specifications]
■Material: PVC
■Size:
Diameter: 180mm
Length: 660mm
Rope hole diameter: 19.1mm

■Applicable boat size guide: 20-30f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

●Size
External dimensions: L420 x W230 x H290
Inner dimensions: L340 x W190 x H225

●Can be used for M24MF/M27MF class battery sizes.

NGK spark plug for outboard motors

[BPR6ES]
SUZUKI Suzuki outboard motor compatible models: DF5 (~'10 MODEL)/DF60/DF70

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug BPR5ES for HONDA BF5A outboard motor

[BPR5ES compatible model]
BF5A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug for outboard motors

[BKR6E compatible model]
DF90・115・140・175・200・225・250
DF9.9/15 ('04-'10 MODEL)
DF25 (V2)
DF90/100/115/140/100A/115A/140A
DF150/175/150TG/175TG
DF200/225/250

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

●BORIKA Clamp Bearer & Mount.

●Rod holders, camera mounts, anchor locks, etc. sold separately can be replaced.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

[Product specifications]
◆Material: SUS304

◆Length: 30m

◆Size: 6 d=6 L=43 B=21 Weight 20.1kg Reference working load=270Kg

◆It is a stainless steel anchor chain that is resistant to rust.

[Product specifications]
◆Material: SUS304

◆Weight=88g

*The price is for one piece.

[Product specifications]
◆Material: SCS13 (equivalent to SUS304)

◆Size: d=11.5 d1=5.8 L=120 L1=50 B=13.5 S=47.5 D=72 Weight=142g

*The price is for one piece.