Collection: Best Selling Products

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

[Applicable model] KAWASAKI SX-R1500 (4 stroke)

[Color] 2-tone diamond pattern black x lime green
[Number of pieces] 4
[Back side] 3M adhesive tape included
HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

[Disclaimer]
Other colors are manufactured to order, so delivery will take approximately 2-3 months from the time of order.
Please note that we cannot accept cancellations of ordered items after the order has been placed.

●Size
External dimensions: L420 x W230 x H290
Inner dimensions: L340 x W190 x H225

●Can be used for M24MF/M27MF class battery sizes.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

[Correspondence] KAWASAKI 12F/15F
[Application] A tool to compress the valve spring in order to remove and install the valve.
[Note] Please use in combination with adapter (product number: 57001-1202).

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] KAWASAKI Kawasaki 12F/15F
●φ22

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Applicable: 46F or higher
■Para anchor diameter: 6.6m
■Towing rope: Φ10×20m
■Retrieval rope: Φ7×30m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 41-45F
■Para anchor diameter: 5.5m
■Towing rope: Φ10×20m
■ Salvage rope (PP rope): Φ7×30m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 36-40F
■Para anchor diameter: 5.0m
■Towing rope: Φ10×20m
■Retrieval rope: Φ7×30m

■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 31-35F
■Para anchor diameter: 3.6m
■Towing rope: Φ10×15m
■ Salvage rope (PP rope): Φ7×25m

■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●This is a full-fledged parachute-type sea anchor.

●Simply drop it into the water and the boat will stabilize upwind.

Use when fishing, diving or when your boat or engine breaks down.

[Product Specifications]
■ Application: 25 to 30F
■Para anchor diameter: 3m
■ Towing rope: Φ10×15m
■ Lifting rope: Φ7×22m

■ Rope material
→Towing: Nylon cloth
→ Pulling up: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 20-24F
■Para anchor diameter: 2.4m
■Towing rope: Φ8×15m
■Retrieval rope: Φ7×22m

■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Applicable: 17-19F
■Para anchor diameter: 1.8m
■Towing rope: Φ8×10m
■Retrieval rope: Φ7×15m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Applicable: Boats below 16F
■Para anchor diameter: 1.2m
■Towing rope: Φ8×10m
■Retrieval rope: Φ7×15m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

[Product specifications]
■Maximum capacity: 300Amp
■Flange diameter: 58.5mm
■With waterproof cap
*Detailed size is shown in the photo

●A simple toggle switch type battery switch.
●Can be used to supply and cut off battery power.
●The red switch lever can be removed.

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

[Contents] 2L
[How to use] For removing red rust, blue rust on the hull, removing stains from the wood of the deck, and cleaning light oily substances.

It does not cause corrosion damage to painted surfaces or metal surfaces of the hull, and the luster of the hull does not disappear.

▼How to use▼
Wet the area to be cleaned with water before use.
For normal use, dilute it 3 times and adjust the concentration depending on the degree of dirt.
Using rubber gloves, thoroughly soak a brush, sponge, or cloth in detergent and scrub depending on the degree of dirt.
Be sure to rinse thoroughly with plenty of tap water within 2 minutes to ensure that no Hytrail ingredients remain.
Wipe off moisture with a dry cloth.

*Please try it in an inconspicuous place before use.
*Do not leave it on for more than 2 minutes as it may change color.

Notes
・Never use a spray bottle.
・Do not use on glass surfaces such as automobiles or aluminum parts of vehicles.
・Please do not use the product under the blazing sun or when the product is hot, as stains and uneven color may occur and will be difficult to wipe off.
・Please do not use coatings (mirror finishing, etc.) or painted areas as they will peel off.

●An hour meter that detects the ignition signal of the gasoline engine and measures the cumulative operating time of the engine.
●Measurements can be made by simply wrapping the included antenna lead wire around the spark plug cord.
●With reset function to return the count to 0

【Product details】
*Cannot be used with diesel engines and direct ignition types.
■Dimensions: L30 x W30 x H15mm
■Body weight: 15g
■Accessories: Antenna lead wire (50cm)
■Daily waterproof specifications
■Measurement method: Pulse sensing method
■Measurement time: Maximum 9999 hours 59 minutes
■Battery life: Approximately 5 years
■Using temperature: -10℃～+60℃

[Product specifications]
●Voltage: 12V
●Current: 3.4A
-External dimensions: 74 x 64 x height 111mm (dimensions in image)
●Drainage volume 50 liters/min
●Compatible with hose diameter 19.0mm
[Adaptation] Ideal for PWC (personal watercraft) and small boats

●Since it is a completely waterproof submersible pump, it is a convenient product for circulating and draining water while on board or during maintenance.
●When wiring, insert a 7.5A fuse (*) on the + cord side.
(*Fuse is not included with this product and must be purchased separately)

[Product specifications]
●12V power can be easily extracted from the cigarette lighter socket and terminal.

●Compatible with taking out electric power! This is a new type of battery BOX whose main terminal has a 60A circuit breaker.

●In accordance with modern needs, it is also equipped with a USB charger socket.

●Equipped with a battery level gauge, so you can conveniently check the remaining battery level with the touch of a button without having to open the lid.

●Socket type: Cigarette lighter (1 burner), USB (2 burners)
●USB socket specifications: Output voltage (DC5V)/Output current (2.1A)
●Built-in breaker: 10A (cigar socket)/60A (main terminal)
●Breaker type: manual reset
●Compatible battery: For 105A or less
-External dimensions: W420 x D230 x H335mm
-Inner dimensions: W340 x D190 x H225mm
(There is a protrusion on the back of the lid to hold the battery in place.)

*If more than the specified current flows, the breaker will operate and shut down the current.
After tripping the breaker, wait a sufficient amount of time before pressing the reset button.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Uses a removable key type that is effective in preventing tampering. Prevents mischief and malfunction.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating to ensure reliable wiring!
●The ring sticker that indicates the switch position uses a luminescent label. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

■The MINI battery switch is ideal for outboard boats and boats equipped with small diesel engines.
■Battery switch that supplies two systems from two batteries. [Switch position] The following four positions are available.
1. Battery 1 → Connect/cut off the power to the two devices.
2. Battery 2 → Connect/cut off the power to the two devices.
3. Battery 1 + 2 → Connect/cut off the power to the two devices.
4. Shut off all batteries 1+2.

[Product use]
●Continuous withstand current: 300Amp
●Momentary withstand current: 1500Amp (2.5 seconds)
●Maximum voltage: 48V
●Size: 68.9x68.9mm
●Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●Highly conductive copper is used for the connection terminal, and the corrosion-resistant tin plating coating ensures reliable wiring!
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.