Collection: Best Selling Products

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

[Applicable] MIKUNI SBN carburetor
006-438 For SBN38mm
006-444 For SBN44mm
006-446 For SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetor.
●KIT contents: Shaft, butterfly, E-clip, seal, bushing, nylon washer

For PWC/black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

for boat MB

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[set content]
Bow tower, winch stand, bow roller, end cap, bolt, nut

For boat black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

For boats and galvanizers

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Ordered products]

■Adaptation: For wooden banks
■Size: 60×45×45

[Compatible models] 1000 / 1100 4-STROKE FX140 FX-C FX160 FX160-C

High torque starter motor built to exceed OEM stock torque.
OEM #:60E-81800-00

●This is a replacement terminal.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

[Compatible models] SEA-DOO GTX-L300('18)/GTX155 ('18)/WAKE PRO 230('18)

[Color] Black diamond pattern
[Number of pieces] 10 pieces
[Back side] 3M adhesive tape included

HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

*SEA-DOO GTX-L300('19-'20)/GTX155 ('19-'20)/WAKE PRO 230('19-'20) is HT-8931DBKP.

[Applicable model] SEA-DOO SPARK 2-seater

■Color: Black x Green

HydroTurf's uniquely carved grooves provide riders with excellent grip and
You can gain control. Thick, high-density foam
[Back side] 3M adhesive tape included

[Applicable model] KAWASAKI SX-R1500 (4 stroke)

[Color] 2-tone diamond pattern black x lime green
[Number of pieces] 4
[Back side] 3M adhesive tape included
HydroTurf's uniquely carved grooves give riders excellent grip and control. Thick, high-density foam

[Disclaimer]
Other colors are manufactured to order, so delivery will take approximately 2-3 months from the time of order.
Please note that we cannot accept cancellations of ordered items after the order has been placed.

●Size
External dimensions: L420 x W230 x H290
Inner dimensions: L340 x W190 x H225

●Can be used for M24MF/M27MF class battery sizes.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

[Correspondence] KAWASAKI 12F/15F
[Application] A tool to compress the valve spring in order to remove and install the valve.
[Note] Please use in combination with adapter (product number: 57001-1202).

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] KAWASAKI Kawasaki 12F/15F
●φ22

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Applicable: 46F or higher
■Para anchor diameter: 6.6m
■Towing rope: Φ10×20m
■Retrieval rope: Φ7×30m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 41-45F
■Para anchor diameter: 5.5m
■Towing rope: Φ10×20m
■ Salvage rope (PP rope): Φ7×30m
■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope

●It is a full-fledged parachute type sea anchor.

●Simply put it in the water to stabilize the boat heading upwind.

●Please use it when fishing, diving, or when your boat or engine breaks down.

[Product specifications]
■Application: 36-40F
■Para anchor diameter: 5.0m
■Towing rope: Φ10×20m
■Retrieval rope: Φ7×30m

■Rope material
→Towing: Nylon cloth
→ Salvage: PP rope