Collection: Best Selling Products

A cotton hoodie with an upgraded feel made of felt-like fabric.
In addition to the switching design, there is also a simple kangaroo pocket and the JTPLT logo embroidered on the chest.

■Material: 80% cotton, 20% polyester, brushed lining

[Chest measurement size/actual size when laid flat]
M: 115cm
L:：120cm
XL: 124cm
*Please note that there may be errors due to measurements taken by our staff.

The Rompa Slash with a back zipper is available only in baby sizes.
Protects your small body from cold and abrasions.

This is an essential sun protection product that protects children's skin, which has less melanin than adults and is vulnerable to harmful UV rays.
Stitched with soft threads that won't rub or hurt even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

■[Applicable size]
80cm: 70-90cm
90cm: 80-100cm
100cm: 90-110cm

*We cannot accept returns or exchanges for special price items.

[Compatible models]
YAMAHA / SEA-DOO PWC (excluding 4-stroke models)

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.

*We recommend supplementary charging after purchase.
When replenishing battery fluid, be sure to use distilled water or a special replenisher, as tap water may cause problems.

Tether for YAMAHA

The Romper Slash with back zipper is available only in baby sizes.
Protects your little one's body from cold and scratches.

This is an essential item for sun protection, as children have less melanin pigment than adults and are therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

*Returns and exchanges are not accepted for special price items.

■【Applicable size】
80cm : 70-90cm
90cm : 80-100cm
100cm: 90-110cm

●YAMAHA genuine parts

●Waterproof battery switch set for MJ FX, VX, EX series

●Set contents: Parts necessary for installation such as battery switch body, power cable, screws, etc.

【 specification 】
Rated voltage: DC12V Rated current: Maximum 60A

●A waterproof battery switch set that allows you to easily turn on/off the battery power of your marine jet.

●Eliminates the hassle of removing the cable from the battery terminal when the marine jet is not in use.

●In addition to the switch, all the parts necessary for installation such as power cables and screws are included.

[Capacity] 1L x 1 bottle

■Class 4 petroleum, danger level 3
■Viscosity: 10W-30
■API classification: SL

Based on automotive oil,
This oil was developed for harsh marine usage conditions (high oil temperature, high rotation, salt water, etc.).
It exhibits excellent performance in terms of washability, abrasion resistance, high temperature oxidation stability, and shearing properties.

*Case sales are also available. Please order product number: [90790-71513C].

[Compatible models]
YAMAHA GP800R(01-02)/GP1200(00-)R/GP1300R(03-08)/800XL(00-01)/800XLT(02-03)/1200XLT(01-04)/1200XL-L(99-00 )/1200SUV(00-02)/FX SHO(09-)/FX ALL(02-03)/VX ALL(05-)

*Please use [003-522] 155mm replacement wear ring.

●YAMAHA pump housing system significantly reduces maintenance costs compared to genuine parts.
●Wearing of the case can be dealt with by replacing the wear ring.

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

It is the same shape as the AURHEAD marble series, and can be pulled from either the front or the back, making it twice the fun!
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

[This series is available in 2-seater, 3-seater, and 4-seater versions]

■Size: 220×203×124cm
■Maximum capacity: 2 people ■PVC tube
■Nylon full cover *Body only, pump and rope not included.

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

It's the same shape as AIRHEAD's marble series, and can be pulled from either the front or the back, making it twice as fun!
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

■Size: 190×185×114cm
■Maximum capacity: 3 people
■PVC tube
■Nylon full cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

This is an inflatable towing tube that is pulled by a personal watercraft or boat.
It is a simple shape of a standard deck type.
You can enjoy top class thrills as your line of sight is close to the water surface when towing.

■Size: 144×144×35cm
■Capacity: 2 people ■PVC tube ■1 towing point

[This series is available in 2-seater and 3-seater versions]

*Main unit only, pump and rope not included.

●SEA-DOO 900 / 1503 13-21 compatible
*Equivalent to genuine part number 277001887
(Equivalent to product number 44 in the second image. [Example] '16 RXT-X300)

GTI 15032015
GTI 130 2013-2016
GTI 130 Rental 2020
GTI DTF 2016
GTI LTD 155 2013-2017
GTI P LTD 155 2018
GTI P SE 130 2018
GTI P SE 155 2018
GTI P SE 90 2018
GTI P STD 90 2018
GTI SE 2019
GTI SE 130 2013-2017
GTI SE 155 2013-2017
GTI SE HO 2017
GTI SE NA 2019
GTI STD 2019
GTI STD HO 2019
GTI STD HO 2017-2019
GTI STD Rental 2019
GTR 215 2013-2016
GTR P STD 230 2018
GTR STD 230 2017
GTR STD HO 2019
GTR X 230 2017
GTR X HO 12019
GTS 2015
GTS 130 2013-2014,2016
GTS HO ​​2017
GTS P STDR 90 2018
GTS Rental 2013
GTS STDR HO 2017
GTX 155 2013-2017
GTX LTD 215 2014-2016
DooGTX LTD 230 2017
DooGTX LTD 300 2016-2017
DooGTX LTD IS 260 2013-2017
DooGTX LTD SCIC 2014-2016
GTX SCIC 150 2013
GTX STD 155 2017
GTX Wake Pro 215 2013-2016
GTXS LTD 260 12017
GTXS STD 155 2017
RXP X 260 2013-2015
RXP X 300 2016-2017
RXP XRS 300 2017
RXT 260 2013-2016
RXT STD 260 2017
RXT STDRS 260 2017
RXT X 260 2013-2017
RXT X 300 2016-2017
RXT X AS 260 2013-2016
RXT XRS 300 2017
Spark 2Up 2015-2021
Spark 2UpHO/3UpHO 2015-2020
Spark DT/NA 2014
Spark TRIXX 2Up/3Up 2017-2021
Wake 155 2013-2016
Wake P STD 155 2019
Wake Pro 215 2013-2016
Wake Pro 230 2017
Wake STD 155 2017
Wake STD NA 2019

●Bolt diameter size: M10

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

Billet oil cap is
Simply replace the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It installs in minutes and is a great-looking, practical upgrade.
You can easily dress up your engine room.

■With O-ring
■Made of durable 6061 billet

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

■Size: 24cm(10")

A cap with a large "LOOK FAST and GO FAST" logo.

■The front panel of the hat features a custom embroidered logo.
The thick embroidery gives it an outstanding sense of luxury. The back style has gold brand embroidery.
■The wide and straight brim type, which is widely popular in street style, is extremely fashionable.
The arched brim blocks more sunlight from hitting your face, but it also reduces your visibility.
The UNLIMITED cap has a wide brim that blocks sunlight while ensuring visibility.
■One size fits all The size can be adjusted with a snapback closure (adjuster) at the rear.
■The inside of the brim is colored red to emphasize the design.

■For everyday wear such as sweatshirts, printed T-shirts and board shorts,
Add a cap for a street look...a popular casual style.

■Can be worn backwards with a collared shirt or polo
The UNLIMITED cap also has a logo on the back style, giving it a shrewd look.

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models]
KAWASAKI ULTRA300, 310 (-'21) series (excluding 310R)
*For UNLIMITED adjustable mount [Product number: UL35003-DAJS, UL35003-AJS] only

[Information] Please use [Product number: UL36301] for 310R.

A plate to relocate the cruise control switch installed in the throttle lever case.
By using it when replacing the stock throttle lever with an aftermarket parts lever,
There is no need to remove the cruise control function.
■Material: Stainless steel (mirror finish)

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Compatible models] KAWASAKI 750/800

[Kit contents]
★Digital CDI power unit (product number: UL21001)
★Lightweight duralumin flywheel (product number: JL-K8P-F)

Digital CDI-R power unit and flywheel kit

Suitable for a wide range of users, including Sunday users, race users, and freestyle users. The engine speeds up smoothly from low rotation to high rotation.
The 800g lightweight flywheel promises quick response and can be expected to increase the high rotation range.

Digitally controls ignition timing using a high-performance 8-bit microcontroller
Built-in different ignition timings for MAP1 to 4. It can be changed with a switch.
Since this is a race-specific model, the limiter has been cut.
It has a compact design that fits neatly into an electrical box, and has unparalleled high durability.
In order to cope with the high engine speed due to the use of a lightweight flywheel, the line has been strengthened to ensure that the input signal from the pickup coil is received.
An ignition map that increases torque characteristics at high rpm to avoid torque loss in the high rpm range when using a lightweight flywheel.

■CDI: Made in Japan

■Compatible models: KAWASAKI 750/800

Digital CDI-R power unit.

Suitable for a wide range of users, including Sunday users, race users, and freestyle users.

Ignition timing is digitally controlled using a high-performance 8-bit microcontroller.
It is possible to switch between different ignition timings for MAP 1 to 4 using the built-in switch.
Since this is a race-specific model, the limiter has been cut.
The input line has been strengthened to accommodate high rotation speeds. In addition, the torque characteristics have been increased to high rotation speeds.
Compact design that fits neatly into the electrical box.
We have achieved unparalleled high durability.
■CDI: Made in Japan

【Guidance】
By using the optional lightweight duralumin flywheel (product number: JL-K8P-F), you can expect even more response and improved high rotation range.
(Set part number: UL21001-KF Total Loss Digital System Kit)

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

This is a hanger specifically designed for wetsuits made by Surflogic.

Shoes, gloves, etc. can be inserted into the top part, so they can be dried easily.
The lower part is 40mm wide and thick, so you can hang wet suits stably.

■You can choose from two styles: round hook and carabiner strap.
■Size: Main body W450mm/H430mm Thickness 40mm Hook length 37mm
■Weight: Hook specification approx. 500g Carabiner specification approx. 570g
■Color: Blue

【please note】
*When removing, be careful not to pinch your fingers.
*Please do not use it for purposes other than wet suits.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

●Can be installed on tongue frames up to 75 x 75 mm.
●Galvanized finish.
●Inner dimensions: Length 520 x Width 300 x Height 71mm.

*Please contact us regarding delivery dates for back-ordered items.

NGK spark plugs for outboard motors

[LKR6E compatible model] DF200A/200AP

● Sold in single units
*The image is an illustrative image.

carry

[Compatible car model] DA16T

[Traction force] A (40kg or less)

*Drilling process

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

You can easily load and unload the important parts of the trailer, such as the axles and electrical components, without submerging them in water. The newly designed mount part for Lopros uses resin parts to improve operability when sliding, and is lightweight and compact, allowing for a wide variety of customization combinations.

After the rear ladder is stored, the rear part is secured with a pin for safety.

■Common for light and Lopros ■Made of steel ■Designed exclusively for Max trailers

【please note】
■Cannot be installed on 2-boat and regular cars.
■Adjustment may be required for wood rail specifications.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping fee is for each item.

Resin pin for absorber

●2 pieces set
●Material: ABS + stainless steel (core)
●TIGHT JAPAN genuine

ADEL It is designed exclusively for ADEL trailers, so it cannot be installed on other vehicle models.

■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-60 Galfender 1 wheel *Stays, bolts, etc. are not included.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

■Made of stainless steel ■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.