Collection: Best Selling Products

NGK Spark Plug LR4C-E for HONDA BF2DH Outboard Motor

[LR4C-E compatible model] BF2DH (2016-)

NGK Spark Plug LMAR6C-9 for HONDA BF60A, BFP60A Outboard Motors

[LMAR6C-9 compatible models] BF60A, BFP60A

● Sold in single units
*The image is an image for reference only.

FACTORY ZERO Factory Zero Jet Launcher
[Compatible products] J-130S / J-130SX
(1300X for two wheels is a separate product "Product number: JL101X")

Factoryzero Jet Launcher Repair Parts

FACTORYZERO Factory Zero Jet Launcher
[Compatible products] For J-1480, J-1480-4, J-1480-4X
[Size] Width from center to center of pipe is 480mm

The handle pipe has an angle that bends downward, making it easier to lift it out of the water.
Factoryzero Jet Launcher Repair Parts

●“Reinforced axle shaft kit” for heavy boats. 260mm.
●If you are towing with power, we recommend replacing it.

●Adaptation: PWC up to 3 people
●Size: J-345SX 1400x380x450mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

racing beach stand runabout

It has a strong frame design with an extra-thick round pipe joint and a total of 4 W belts on one side to prevent opening, so it can be used safely even on heavy boats. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Applicable: Single boat only
●Size: J-333SX 970x350x300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: J-333SX is equipped with a PVC cover as standard

racing beach stand single

The round pipe joint makes the frame even stronger, so you can use it with confidence on your precious boat.
In addition, the rail part has a PVC cover, so the boat can be easily mounted without getting scratched.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

■For 4-wheel SUV/LRV
■Total length x total width x rail width: 3,360 x 1,160 x 520mm

Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

■4 wheels with strong stainless steel winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

■Standard 4 wheels with winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,200 x 960 x 661mm
■Frame: 70mm square
■Caster diameter: 150Ф

The 4-point support prevents front and back misalignment, making sling belt work easier.
Uses flexible and fixed casters of 150φ, allowing smooth movement over a long period of time.
Also, due to its large diameter, it rolls smoothly.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: J-210 PWC up to 3 people
■Total length x width x height: 1350 x 709 x 275mm (rail width: 440/340mm)
■Frame: 380mm square
■Caster diameter: 100Ф

*"J-209 Maintenance Stand High Grade" is recommended for boats weighing close to 500 kg.

Lowering the rail section improves runabout maintenance work efficiency!
The rail width is adjustable and all casters have stoppers.
Made of aluminum and specially anodized, it is lightweight and will not rust.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,340 x 955 x 410mm (rail width: 580mm)
■Frame: 70mm square
■Caster diameter: 125Ф

Since it uses anodized corrosion-resistant aluminum pipe (high strength pipe with center rib), it can be used with confidence even on lightweight and sturdy 500kg class boats.
Comes with a hook and rope to prevent it from slipping off.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■J-203S Single
■Total length x width x height: 1416 x 590 x 600mm (rail width: 300mm)
■Caster diameter: 100Ф

With a height of 600mm, this stand makes maintenance work on single boats easy.
The beautiful surface finish with special alumite treatment is perfect for display.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Model Number] J-1480X / Jet Launcher 2-wheel rail width 480mm type [Suitable for] Tandem / Runabout models

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 22kg
Frame weight: 10kg

Made of aluminum, it is lightweight and rust-free, and each joint is bolted and welded for excellent durability.
Nylon roller bearing plastic wheels and block pattern tires make it easy and smooth to move around!
It is 30mm wider than the previous 450mm width.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

●DENSO Iridium plug (NGK plug compatible with CR9EKB)
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

●DENSO Iridium plug
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[Compatible models]
KAWASAKI STX DI / ULTRA130 DI

● Compatible with NGK plug PZFR7G-G

[Compatible models] YAMAHA
FX CRUISER HO(2021, 2020, 2019)
FX CRUISER SVHO(2021, 2020, 2019)
FXHO(2021, 2020, 2019)
FX LIMITED SVHO(2021, 2020, 2019)
FXSVHO(2021, 2020, 2019)

This FX stern storage is in addition to the FX's regular storage.
It has enough storage capacity to carry everything you need for long trips on the water.
In addition to its capacity of 50 liters, this is a masterpiece that shines with its excellent design.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): FX cooler bag can be installed

*The hull and product images are used images.
*This product is not waterproof.

NGK Spark Plug DR7EB for HONDA BF40D, BF50D Outboard Motors

[DR7EB compatible models] BF40D, BF50D

● Sold in single units
*The image is an illustrative image.

NGK Spark Plug DR7EA for HONDA Outboard Motors

[DR7EA compatible model]
BF25A/BF25D/BF30A/ BF30D(2003-)/BF35AM/BF40A, BF45AM, BF50A4/BF75A, BF90A

● Sold in single units
*The image is an illustrative image.

NGK spark plug CR4HSB for HONDA BF2D outboard motor

[CR4HSB compatible model]
BF2D(2000-2015)

A camping bucket (14L) is a must-have item for outdoor activities.
This item is especially perfect for eliminating inconveniences around the kitchen.
You can carry all the dishes you have finished eating to the water source, and when you wash them, you can also use them as a sink and as a container for the dishes you have finished washing.
There are also endless ways to use it, such as filling it with ice water to chill drinks, storing and transporting camping accessories and ingredients, etc.
The stylish design with the Chums logo on the bright red body is a great item to have.

[Precautions for use]
・Keep away from fire or high temperature objects.
-Due to the rain, please refrain from storing the product while it is wet or storing it for a long period of time in high temperature and humidity.
・Please be careful not to use items with excessive weight as this may cause damage.
・Please refrain from storing polyester products in close contact as there is a possibility of color migration.

■Size: H 25 x W 28 x D 28cm
■Capacity: 14L
■Material: PVC
Made in CHINA

BR9HS-10

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●A set of 10 pieces is sold in a case.
*Single bottle is also available.
*The image is an image photograph.

BR9ES-10

●For integrated terminal types, the terminal on the head cannot be removed.
Terminal Type:Solid(non separated)

●A set of 10 pieces is sold in a case.
*Single bottle is also available.
*The image is an image photograph.

NGK spark plug BPR5ES for HONDA BF5A outboard motor

[BPR5ES compatible model]
BF5A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

[Compatible models]
KAWASAKI Kawasaki ULTRA300

●This product is designed to adjust the AFR (air fuel ratio/fuel mixture ratio).
This is an IG module to control the unit that controls the fuel injector.
●Adjustable and must be used in conjunction with CMDM.

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

This is a great value kit that can repair FRP and includes the necessary amount.

[Kit contents]
■Resin: 2kg (with paraffin)
■Hardening agent: 50cc
■Polyester putty: 200g
■Glass mat: 2m x 1m
■Wool roller: 75mm x 1
■ Spatula tree: 1 piece
■Cleaning acetone: 1L
■Polypoid: for 10cc

■Mounting frame: up to 76.2 x 127mm
■Material: Steel/galvanized
■Maximum load: 680kg / 1500LBS
■Stroke: 300mm
■Wheel diameter: 6" double / 152.4mm

CASTRO
Castro Fender was born in Spain in the early 1970s by founder Carlos Castro.
Castro is now one of the world's largest manufacturers of buoy fender floats.
Our products are sold in over 70 countries around the world and are widely praised for their outstanding quality and innovative design.

■Size: Diameter/Total length/Eye diameter
A-0HD: 200mm / 270mm / 25mm
A-1HD: 290mm / 370mm / 25mm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it extremely durable. ,
●Can also be used as a course buoy if installed upside down.
●You can easily inflate with an air compressor or air gun.

【please note】
*Air injection nozzle not included *Delivered with air removed *As this is an overseas product, specifications may change without notice.

●A trailer jack made of aluminum with a novel design.

●Flat plate type. Foldable type.

■Mounting frame: up to 76.2 x 101.6mm
■Material: Aluminum
■Maximum load: 900kg
■Plate diameter: 178mm

●A battery switch that supplies two systems from two batteries; the switch position is from battery 1 to connect/cut off power to two devices. Battery 2 → Connect/cut off power to two devices. Battery 1+2 → Connect/cut off power to two devices. All batteries 1+2 are cut off. It has 4 ways.

●The e-series is ideal for boats equipped with small to medium-sized diesel engines.

●Manufactured by BLUE SEA, which boasts a top market share in the United States for electrical wiring parts related to RVs and boats, and is recommended by many builders.

●Continuous withstand current: 350Amp

●Momentary withstand current: 1750Amp (2.5 seconds)

●Maximum voltage: 48V

●Size: 97.8×97.8mm

●Terminal stud: 9.5mm

◆◆◆Main features◆◆◆

●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.

●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.

●You can tell that the knob is firmly in each position by a firm "click" response.

●There are two installation methods. Compatible with wall mounting and stationary mounting methods.

■Volume: 400ml (approximately 20 servings)
Softening effect (milky) / Sweet floral scent Cleansing power (clear) type / Mysterious forest scent

Unlike existing wet shampoos, AROMA WET is an all-in-one type that contains fabric softeners and fragrances in addition to cleaning agents. It contains disinfectant, deodorizing ingredients, and fragrance ingredients.
The foam rinses off easily and the washing and rinsing process can be completed in one go, so you can use it like you are washing your suit while taking a shower.

This is a recommended detergent to extend the life of your expensive wetsuit.
Since you can't use regular detergents, isn't it the case that you usually just wash it with water?
This wet shampoo is a detergent specially developed for neoprene (wetsuits). It removes various types of dirt from wetsuits and prevents aging.

[Staff comments]
Not only does it remove dirt, but it also softens the fabric and makes the smell that was bothering me a lot fresher! I can feel the effects immediately, so I recommend it with confidence.

Surfing, Bodyboarding, Wakeboarding, Wakesurfing, Kiteboarding, Flyboarding, Diving, SUP, Windsurfing, Kayaking, Canoeing, Marine Sports

●This boat dolly is essential for transporting boats.

●The tires are 6 inches in size and are puncture-free tires that do not have to worry about air leaks.

●The angle adjustment pin can be operated with a lever, making it easy to flip up and down with one hand.

●The shaft is made of lightweight aluminum and has been anodized to increase durability.

●The bearing in the rotating part of the tire allows the tire to rotate smoothly.

●With knob screws and special metal fittings, the mounting hardware can be easily removed from the boat. Therefore, the mounting brackets do not get in the way when storing the boat.

●Since the metal fittings are removable, the transom is neat and does not get in the way when stored.

■Tire type: 6 inches ■Total length: 775mm
■Weight (one side): 3.2kg
■Tire load capacity (one side) (kg): 120
■Shaft material: Aluminum (anodized)

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

●BORIKA Clamp Bearer & Mount.

●Rod holders, camera mounts, anchor locks, etc. sold separately can be replaced.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

[Contents] 454g

●Belray Water Resistant Grease is completely water resistant even to salt water, and can be applied to wheel bearings, bushings, and chassis lubrication points to provide the best lubrication and corrosion resistance.

●It can be used for many purposes, and has water resistance, heat resistance, excellent rust and corrosion resistance, load capacity, impact resistance, and abrasion resistance.

●This product is a high-performance general-purpose grease manufactured with an aluminum composite and barium composite structure.

●Meets all bearing lubricant needs for jet, trailer, marine, automobile, motorcycle, snowmobile/ATV applications.

●Can also be used for trailer wheel bearings on boat trailers and caster wheels on snow blowers where salt resistance and water resistance are essential.

●Provides maximum long-term protection from wear, rust, water washout, etc.

●NGL viscosity grade #2

The more you sweat with the evaporative cooling effect, the cooler you feel!
This amphibious arm cover has a curved design that keeps your upper arms neat and the elbows in place even if bent.

It stretches both vertically and horizontally, so it can be used in pools, at the beach, and outdoors, and provides excellent UV protection.

●It is amphibious, so you can use it in the pool or at the sea.

●The finger-opening design allows you to use your fingertips freely, allowing you to do detailed work while wearing it.

-Cool -5℃ due to evaporative cooling effect

*According to our measurement standards, this is the measured value of the temperature on the back side of the product (skin contact surface).
The experience is not guaranteed.

●Inside stretch mesh with good breathability

●UV cut rate 99%

Size: Total length (standing size) 54cm/approx. 46g (twin)

Material: Rayon, nylon, polyurethane

made in china

The more you sweat with the evaporative cooling effect, the cooler you feel!
We provide thorough care at the pool, at the beach, outdoors, and around town.
Provides solid UV protection from your upper arms to your fingertips.

●Amphibious, can be used in the pool or the sea

-Cool -5℃ due to evaporative cooling effect

*This is the measured value of the temperature on the back side of the product (skin contact surface) according to our measurement standards.
The experience is not guaranteed.

●Smartphone compatible thread
You can operate your smartphone while wearing it.
Conductive thread is used for the thumb, index finger, and middle finger, so it works smoothly.

●Inside stretch mesh with good breathability

●UV cut rate 99%

Suitable size: Hand circumference approx. 18-22cm
Product size: Total length (standing size) 31.5cm
Weight: approx. 32g/pair
Material: Rayon, nylon, polyurethane

made in china