Collection: bestseller

Because it is a large item, shipping charges will be charged separately.

TIGHT JAPAN MAX Trailer fender kit that allows you to change the fender for trailers to a fender with steps by bolt-on
*Please enter the trailer model in the notes section to confirm compatibility.

■Sales unit: 1 set (left and right set)

【important point】
・Cannot be bundled with other products ・Cash on delivery is not possible as this item is shipped directly from the manufacturer

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel (chrome plated)

■Pin diameter: 6.4mm

[Product specifications]
■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1500mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

Due to the large size of the item, shipping charges will be incurred.

This is an auxiliary part that offers a wide variety of variations in adjusting and changing the tower position.

■Size: Total length 1,690mm, slant height difference 50m

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

[Product specifications]

■Sold in units of one.
■Total length: 1830mm
■Mounting hole pitch: 1290mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Up to 2 items can be shipped at once.

■It is a mount cap for the hitch member mount socket.

■Fix to the mount cap with a receiver lock (1/2" 12.7mm) pin.

■Material is plastic with chrome plating finish to create a stylish hitch member.

■Compatibility: Class II (Square type, inner diameter 32 x 32 mm compatible)

■Material: Plastic (chrome plated)

This is an essential item for engine setting.
Simply bring it close to the plug cord and the rotational speed will be displayed at 0.5 second intervals.

【Product details】
■Compatible with: 2 stroke 1/2 cylinder, 4 stroke 2/4 cylinder
*Cannot be used with direct ignition type engines.
■Dimensions: L44 x W61 x H12mm
■Body weight: 31g
...
■Accessories: Antenna lead wire, Velcro (for installation)
■Daily waterproof specifications
...
■Measurement method: Pulse count method
■Rotation speed display interval: 0.5 seconds
■Accuracy: ±10rpm (4-stroke 1 cylinder ±20rpm)
■Battery life: Approximately 20,000 hours

This is a failure determination device for gasoline engine ignition system.
You can check the ignition spark by simply connecting the included cord and starting the engine.

A convenient bracket that can neatly fix 50 square pipes.

■Inside: approx. 55mm
■Mounting hole pitch: Approx. 63mm (center to center)

■1 set of 2 pieces
■Made of steel
■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

Due to the large size of the item, the following "area shipping fee" will be charged separately.

[Product specifications]
■For small cars only ■Sales unit: 1 piece ■Total length: 2000mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

This is an essential item for engine setting.
Simply bring it close to the plug cord and the rotational speed will be displayed at 0.5 second intervals.

【Product details】
■Support: 2 stroke 1 to 4 cylinders, 4 stroke 1 to 6, 8 cylinders
*Cannot be used with direct ignition type engines.
■Dimensions: L44 x W61 x H12mm
■Body weight: 31g
...
■Accessories: Antenna lead wire, Velcro (for installation)
■Daily waterproof specifications
...
■Measurement method: Pulse count method
■Rotation speed display interval: 0.5 seconds
■Accuracy: ±10rpm (4-stroke 1 cylinder ±20rpm)
■Battery life: Approximately 20,000 hours

■Material: Stainless steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Product specifications]

■Sold in units of one.
■Total length: 1830mm
■Mounting hole pitch: 1290mm
■Accessories: Mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping charges are for each item.
*Due to large items, shipping charges will be incurred.

Minus bar

Size: 50 x 50 x 1300 (mm)

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

A bank pad is attached to the wood rail.

■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1430mm
■Two bank mounting angles included

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

The height and front and rear positions of the rollers can be adjusted to suit the hull.
Compatible with single boats of each manufacturer.
It is designed to be fixed by co-tightening with the rail and to have the optimal rail width for single boats.

■Size: 80x25mm (diameter x thickness)
■Set of 2

[The photo shows stainless steel]

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■An essential item when mooring your boat! A retractable boat hook that can be fixed in any position.

■Adjusting the length of the handle is very easy, just twist the aluminum pipe part to the desired length, and then twist it the other way.

■Material: Aluminum (body), plastic rubber (handle tip)

■Specifications: 2-stage expansion and contraction

■Stretch width: 124-217cm

■Pipe diameter: 29mm

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

This is a great value kit that can repair FRP and includes the necessary amount.

[Kit contents]
■Resin: 2kg (with paraffin)
■Hardening agent: 50cc
■Polyester putty: 200g
■Glass mat: 2m x 1m
■Wool roller: 75mm x 1
■ Spatula tree: 1 piece
■Cleaning acetone: 1L
■Polypoid: for 10cc

[Product specifications]
■Material: Stainless steel SUS
■ Breaking strength: 800kg

●A safety hook that is resistant to rust and corrosion.
●The hook has a spring mechanism.

●Drilling size: 24φmm
●Flange size: 51×34mm
●Screw screw hole: φ6mm
- Distance between screw centers: approx. 38mm

*Main body only, mounting screws etc. are not included.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 5500kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

●Draining water from boats without power sources, such as canoes and rubber boats,
It can also be used to drain water from pools and cages.

●A cordless pump that can be used with seawater or fresh water and uses batteries.

●Since it uses batteries (3 AA batteries), no wiring is required.

●Maximum discharge rate 12.6L/min
●Pumping height: 100cm
● Can be used continuously for about 5 hours (when using alkaline batteries)
●Dimensions: Height approx. 16.2x Diameter approx. 13.3cm
●Weight: Approximately 900g
●Hose length: 1m

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 15000kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 10300kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

■Length: 1,170mm (excluding hook)
■Hook: 110mm

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Since it uses an L-shaped cylinder, it is easy to attach and detach at the center of the hitch member, which tends to be narrow.

■Pin diameter: 16mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Compatibility: 3/8” hose 8894-7 for Yamaha outboard motors

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Yamaha outboard motors 1/4”NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Product specifications]
■Type: Twin
■Material: Stainless steel
■Current: 6A
■Voltage: 12V
■Output: 109dB
■Basic frequency: H490±20/L440±20HZ
■Size: 210×83×55mm

●This is a horn for ships.
●A compact type made of rust-resistant stainless steel material.
●Since it can be installed anywhere, it is ideal for boats with limited space.
●Since it is a twin type with high and low notes, it produces a more spacious tone compared to a single type.

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan