Collection: bestseller

Float goods that attach to the hat size strap ■Size 50mmx30mmx20mm

[Disclaimer]
As this is an American standard product, there may be distortions, dents, or misaligned stitches.
Please note that these are product specifications.

Not only can you use the ringtone, but you can also have conversations while keeping it in the case!
The back part also has a "clear visibility panel" that is compatible with cameras, so you can take pictures with the camera while it is in the Aqua Pack.

AQUAPAC is a British-made waterproof case that is sold in more than 50 countries around the world, and is a trusted brand chosen by professionals, including the Coast Guard and NATO forces overseas, as well as the Japan Coast Guard and prefectural police in Japan.
Completely sealed with patented lever [Aquaclip]. It is waterproof to a depth of 5m, so you can use it safely without worrying about it getting splashed with water or falling into water.

[No gusset] Comes with a strap for hanging around the neck

■Waterproof performance IPX8 [※1]
■Materials Case body: Polyurethane Clip part: ABS resin [*1] Water will not leak inside even if continuously submerged in water (5m/30 minutes).

Even if you gently submerge the case in 5 meters of water with no current and leave it for 30 minutes, no water will get in.
However, this value does not guarantee the waterproof performance of the devices themselves, such as mobile phones, cameras, radios, etc.
Also, it does not mean that you can use the equipment freely for 30 minutes at a depth of 5 meters.
Some equipment may be damaged by water pressure or may not operate properly if brought underwater. Also, please note that even if the water is 10cm deep, water may seep into the case if it is strongly pulled or subjected to impact.

[Precautions for use]
The manufacturer guarantees the Aqua Pack itself against defects such as water leakage, but does not guarantee the contents. Please be sure to check for water leaks before use. Also, when closing the Aqua Pack, please do so carefully and slowly.
*Please note that under no circumstances will we be able to compensate for direct damages such as malfunctions of mobile phones or various devices placed in the case, or indirect damages associated with such damages.

This item has a slightly tight body silhouette and a long length that provides excellent cold protection.
It is highly functional as riding wear and can be freely coordinated with bottoms.
It can be worn alone or paired with long johns or long pants.
Since it is sold as a series, you can freely match the colors to your liking.
This marine wear is made of 2.5mm fabric and can be used in all three seasons: spring, autumn and winter.

Unlimited -Comfort-
This is an UNLIMITED clothing series that caters to users who want to enjoy marine sports more easily and freely. This marine wear combines design and functionality.

【Features】
It has a tighter body line than conventional tour coats.
The length, designed to provide protection from the cold, expands the possibilities of a marine coat.
The Velcro closure at the wrist does not interfere with accelerator work and the sleeve length can be adjusted, giving a smart impression.

・2.5mm chloroprene
- High stand collar keeps wind out from the neck
- The smart hood and integrated collar are wreath-style, providing even better protection against the cold.
- Wrist cuff closure (Velcro type) for length adjustment
- The length is just right to cover your waist when sitting down and not feel bulky.
- Media pocket with flat zipper on the chest
- Seamless pockets with reflective print on both sides
-The inside of the long zip guard is red, a hidden detail.

■Size: S to XXL
[A. Total length / B. Chest width / C. Hem width / D. Sleeve length / E. Sleeve width] *All measurements in cm laid flat
S: A.72 /B.55 /C.52 /D.67 /E.11
M: A.74 /B.57 /C.54 /D.68.5 /E.11.5
L: A.76 /B.59 /C.56 /D.70 /E.12
XL: A.78 /B.61 /C.58 /D.71.5 /E.12.5
XXL: A.80 /B.63 /C.60 /D.73 /E.13

[Freely combine] Separately sold setup products
・RUSH WETSUITS JHON - Wetsuit John (product number UWJ2210)
・RUSH WET PANTS - Wet pants (product number UWP2220)
・RUSH WET JACKET-Wet jacket (product number UWA2230BK)

Based on the impressions of our professional riders, we thoroughly analyzed the rider's movements and repeatedly tested the optimal cut pattern. This is the ideal wetsuit that effectively uses highly elastic materials. You will surely be able to experience the highest quality and high potential of UNLIMITED.
-UNLIMITED RUSH-
Aiming for higher performance, the design is focused on specifications that maximize the power, speed, and stability of PWCs, under the supervision of UNLIMITED's exclusive professional riders. The ultimate wear that allows riders to embody a smart look that is in line with the times.

【Features】
2.5mm flex chloroprene YKK zipper Body fitting cut out panels Unisex design

[Freely combine] Separately sold set-up products: RUSH WETSUITS JHON - Wetsuit John (product number UWJ2210)
・RUSH WET PANTS - Wet pants (product number UWP2220)
・EXPEDITION COAT-Marine Coat-(Part number UWC2240)

■ Applicable size chart (all cm)
[A. Length/B. Chest width/C. Waist width/D. Hem width/E. Sleeve length/F. Wrist width]
S: A.56/ B.40/ C.35.5/ D.36.5/ E.62/ F.7.5
M: A.58/ B.42/ C.37.5/ D.38.5/ E.64/ F.7.5
MW: A.58/ B.44/ C.39.5/ D.40.5/ E.64/ F.7.5
L: A.60/ B.44/ C.39.5/ D.40.5/ E.66/ F.7.5
LW: A.60/ B.46/ C.41.5/ D.42.5/ E.66/ F.7.5
XL: A.62/ B.46/ C.41.5/ D.42.5/ E.68/ F.8
XLW: A.62/ B.48/ C.41.5/ D.42.5/ E.68/ F.8

*Each size has an additional 5cm of stretch to accommodate different lengths*MW, LW, and XLW are made wider while maintaining the same length as the M, L, and XL sizes.

These inner socks will improve the fit of your shoes.

■The inside of the ankle is made of Sliceskin.
The stretchy, snug material prevents it from slipping.
At the same time, it also prevents water from entering, so it is also excellent at keeping body temperature.
(It is not completely waterproof.)
■These socks have a soft feel that makes them comfortable to wear, excellent stretch performance, and excellent heat retention.
■The bottom is printed with a honeycomb pattern rubber, which acts as a non-slip surface. It prevents the shoes from slipping and reduces power loss when you push down.

■MATERIAL / 2.0mm chloroprene ■Suitable size S: 24.0-25.0cm
M: 25.0-26.0cm
L: 26.0-27.0cm
XL: 27.0-28.0cm

A super classic item that can be used for all marine sports.
The comfort and hold you feel when you put them on is completely different, so please give them a try.
Made from neoprene, it feels soft against the skin and provides a comfortable fit.

Personal Watercraft PWC Personal Watercraft Boat Watercraft Jet Ski Marine Jet Marine Shoes Marine Boots Jet Boots Lace-up Shoes
Riding Shoes

This top has a loose-fitting silhouette while still maintaining its quick-drying properties, making it suitable for a wide range of outdoor activities, including marine sports, pools, and fields.

It prevents chafing of the skin against the life jacket and also protects the skin from UV rays.
The sleeves have thumb holes, so UV protection is almost perfect.
It also has a front zipper, making it easy to put on and take off.

■ Suitable chest size S size: 85-90cm
M size: 90-95cm
Large size: 95-100cm
XL size: 100-105cm
XXL size: 105-110cm

Personal watercraft PWC UV care Just the right size water bike Water motorcycle Water repellency Surfing SUP Kawasaki Jet ski Marine sports Wakeboard YAMAHA Marine jet Marine wear Kayak Canoe Beach Outdoor Men's

An evolved glove that has all the elements needed for riding. A hard glove for riding that combines the ideal protection function and durability that riders desire, as well as free throttle work.

The back of the hand is a triple-layered double protector.
It reduces stress when gripping and absorbs shock.

The tops of the fingers are equipped with molded protectors, and Lycra fabric is used on the joints and sides of the fingers to allow for smoother finger movement when gripping the glove tightly, making the glove a design that prioritizes accelerator work.
It features fine fabric changes from the fingertips to the instep and wrist.
In particular, the back of the hand has a "three-layer structure" of glove fabric and two protectors, providing the highest level of protection and comfort.

In addition, wrist tape, which was previously located on the handlebars and prone to coming off, has been attached to the top of the wrist, preventing the gloves from slipping off while riding.

The palm is reinforced with durable Kevlar and Clarino synthetic leather, and triple stitching is used in key grip areas to provide added strength without compromising grip feel.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Rock Grip Splash
[Compatible] External handlebar
[Size] 130 x 29mm
[Lock ring] Red
[Included] Plastic end

The diamond pattern prevents blisters from forming on your hands, and has sharp teardrop-like cuts that make it easy for your fingertips to get caught and prevent slipping. The lock part is made of aluminum to prevent the grip from coming off.
No adhesive required!

*You can enjoy your favorite color coordination with optional items sold separately.
[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003)
●End cap 2 pieces (product number UL32004)

UL32002BK Black
UL32002WH White

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Lock Grip Ergo
[Size] 130 x 30mm
[Lock ring] Black
[Included] Plastic end

The ergonomic structure is designed to fit in the palm of your hand for comfort while riding. The wide design disperses localized pressure on the palm, reducing strain on the hands and arms.
The grip part is made of soft rubber, and the outer periphery is made of grooved non-slip rubber to improve grip.
This ergonomic grip has a fit that sticks to your palm and a soft grip.
The lock ring is made of aluminum, and by tightening the screw, it prevents the grip from coming off the handlebar.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!

[Precautions when installing] Apply grease to the lock ring tightening bolt to prevent it from sticking, and be careful not to overtorque when tightening the bolt.

【option】
By attaching the optional color grip ring and end cap (sold separately), you can create an even more stylish look around the handle.
●Lock ring 2 pieces (product number UL32003-all 6 colors)
●End cap 2 pieces (product number UL32004-all 6 colors)

UL32008BL Black/Blue
UL32008GR Black/Green
UL32008GY Black/Gray
UL32008RD Black/Red

UNLIMITED lock-on grip series
*ODI grip cannot be installed on other manufacturers.

[Product name] LOCK RING

[Material] Made of aluminum
[Quantity] 2 pieces 1 set

Optional lock ring for UNLIMITED lock grip.
You can dress it up by matching the color of the throttle lever and handlebar.
The lock part is made of aluminum to prevent the grip from slipping out.

UL32003SL Silver
UL32003BK Black
UL32003GR Green
UL32003OR Orange
UL32003BL Blue
UL32003RD Red

JETPILOT roll type waterproof bag

It is a waterproof bag that can be carried over one shoulder and can also be worn cross-body. Wrap the opening of the top about twice and fasten the left and right buckles at the top.

Since the roll part is looped, it can also be used as a hand-held waterproof bag.

■Material Waterproof coat tarpaulin ■Capacity approximately 5 liters ■Accessories Shoulder strap

jet ski watercraft watercraft watercraft
Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Snorkeling Marine Sports

■Jet ski/motocross/off-road/trial/enduro goggles

■Model: O Frame 2.0 PRO MX O Frame Pro
■Lens: LexanR
■Lens color: light gray

■Accessories: Microfiber storage bag

- Dual switch locking mechanism to securely secure the lens to the frame
- Contoured frame structure maintains comfort
- Prism lenses to maximize visual contrast
- Anti-scratch/anti-fog/impact Plutonite lens

[Compatible models]
RXT/RXT-X/GTX/WAKE Pro (2018~) No suspension model

*WAKE Pro (2010-2017) part number: 295100720
※WAKE (2011-2017) is part number: 295100724

295100697

Designed to fit perfectly with the SEA-DOO genuine PWC cover and made from fabric with excellent UV resistance.

●When selecting a product, please be sure to check the following items before placing your order.
Please carefully check 1. the manufacturer, 2. the model name (common name), 3. the year of manufacture, etc. before purchasing.
●Prices and specifications regarding the displayed prices are subject to change without notice.
If the listed price differs from the selling price due to manufacturer part numbers, price changes, etc., we will ship the item after receiving your consent.

[Information regarding genuine products]
※This is a made-to-order product※
*This product is a genuine product and cannot be cancelled or returned after ordering*

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and protect the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

[Compatible models] KAWASAKI
STX160 series
STX series
800X-2
ULTRA series (※)
*2022 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

■Handlebar clamp: Compatible with standard handlebars (diameter 22+-0.2mm, 7/8")

An innovative steering mount kit with a built-in spring in the steering mount.
The moderate spring repulsive force absorbs shock during riding and reduces rider fatigue.

The stroke amount is a 7mm stroke that has a movable range that does not easily affect riding.
To achieve smooth movement, lubrication is possible from the grease nipple on the top of the steering mount.
The internal components are made of stainless steel, and the steering mount body is made of aluminum billet using a precision machining center.

[Information] There are optional items sold separately.
[UL061] Fat bar clamp
[UL062] Offset clamp

【please note】
2022 ULTRA 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

[Compatible models] YAMAHA Marine Jet 760/1100/1200/1300/4 stroke (700 not available)

The hose outlet is a one-touch joint connector type.
General-purpose one-touch connectors can be used.

When flushing the engine using salt remove fluid,
When connecting the hull and mixer, use this product and wash with water.

■Pattern: Diamond ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

Note: Adhesive is required for attachment.

[Manufacturer] SUBARU
[Car model] Forester
[Compatible car models] 5BA-SK9, 5AA-SKE 4BA-SK5
[Year] H30.7~R3.7
[Compatible grades] 5BA-SK9: Touring, Premium, X-BREAK 5AA-SKE: Advance 4BA-SK5: SPORT [Supplement] Removal of towing hook and heat shield plate (processing required)

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-3
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] MAZDA
[Vehicle type] MPV
[Compatible car model] LY3P
[Year] H18.2-H20.1
[Compatible grades] 23C-Sporty Package, 23T, 23C [Supplement] For both 2WD/4WD

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-1/3
[Drilling] 2
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Stylish design with steps on the front and back for convenient maintenance!

■Sales unit: 1 piece (2 pieces required when replacing left and right) Common shape for left and right ●Accessories: None

[Requests and notes when ordering]
*Please let us know the trailer model when ordering. It may not be possible to install depending on the model of trailer.
The following information is required for compatibility confirmation and product arrangement.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

★Cannot be installed (example): 2019 TWINJETSW cannot be installed

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

[Applicable] SEA-DOO 4-stroke pump diameter 161mm (for 300/230 horsepower)

● BRP genuine part number 267000917

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

[Compatibility] KAWASAKI ULTRA310/300/260/250/LX/STX-15F/12F/SX-R
SEA-DOO 2010 and later models ALL (RXT as 260 RS 2012 and later models excluded)

●945ml of stock solution + mixer + hose adapter

[Application]
Preventing salt damage such as corrosion and rust due to the influence of salt
For flushing marine engines, cleaning hulls, drives, cars, and trailer undercarriages.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc., protecting tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.

●Not only marine products but also various items used in coastal areas,
They suffer from problems such as corrosion and rust due to the effects of salt.
Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be effectively washed with water.

[Compatible models]
YAMHA 4 stroke model (FX-SHO/FZR/FZS)
For other models, please use "Q5W-MIT-001-088".

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Adaptation] SEADOO
300 horsepower /
2018 models below 260 horsepower
(*Excluding Spark/GTI90)

【Guidance】
*Models before 2017 other than those listed above → Product number: OIL-SD1503-S

■Set contents
[1] Synthetic blend oil 946ml [Product number: 779133A] x 3
[2] Aftermarket oil filter (with O-ring) [Product number: JL009-300] x 1
[3] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Tank capacity 5.0L
*Usually the amount required for oil change is 2.7 to 3L. Depending on the content of the work, more may be removed.
In that case, please prepare Synstick Blend Oil [Product Number: 779133A] separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

A multi-hanger that can dry and drain the internal water at the same time.
Easily dry clothing with shoes that are difficult to dry, such as waders, Ayu Tavi, and Iso shoes!
Comes with a rotating grip that can be used as both a clothesline and a rope, and can also be used as a hook. Since the shoes are turned upside down, the water from washing them will easily fall down and there will be better ventilation.

It will definitely make it easier to wash shoes and waders that are not only difficult to dry, but also difficult to figure out the correct way to dry! Only with a special product can you dry your shoes in an ideal way by hanging them in the air and turning them inside out.

■Suitable for footwear with foot sizes from 20cm to 28cm

■Load capacity is 5kg

■Body material polypropylene ■Hook ABS

Precautions for Use This product is a hanger specifically for boots, waders, etc., so please do not use it for any other purpose.
If you leave it on for a long time, it may cause a chemical change in the anti-slip properties of this product, which may cause the surface of boots etc. to change or deteriorate.
Do not use near fire.
Please store indoors when not in use.
Depending on the shape, it may not be possible to use certain types of shoes, such as mountain climbing shoes or shoes with special soles.

Jet ski Watercraft Watercraft Watercraft SUP Snorkeling Scuba diving Surfing Marine sports Beach Pool Trekking
River play Fishing Boat Kayak Canoe Marine shoes Marine boots

[PWC compatible models]

◆YAMAHA For Yamaha Marine Jet (*Genuine product number: 94702-00435)
FX SVHO (2014-)
FZR SVHO (2016)
FZS SVHO (2014-2016)
GP1800 (2017-)

●Single item sales
●YAMAHA genuine product number: 94702-00435

*Image is an image photo

First landing in Japan! Jet ski cleaning item series born in America
Anti-fog is now available from JET RENU!
The cool, American-style package design that you don't often see on Japanese products is eye-catching. It is a popular brand in the United States for its cleaning items specializing in water motorsports.

Maintain clear vision during activities.
Please use it to prevent fogging of windshields, face visors such as helmets, goggles, sunglasses, etc.

[Contents] 118ml
[How to use] Spray on areas where you want to prevent fogging, such as goggle lenses, windshields, and helmet face visors, blend well with hands, and then wipe with a soft cloth.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

When attached to the bank of a trailer, it can be easily slid to load and unload jets and boats.

■Material: Polyethylene ■Total length: 13300mm
■Full width: 29mm

■Set contents Blue rail 133cm x 4 pieces

[Notes about the product]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
●Please note that small scratches occur during the manufacturing process and are not eligible for return or exchange.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Suitable for] 2-stroke stand-up single-cylinder boats only. *Please use the "J-150" series for the 1500SX-R. *

[Model Number] J-130SX / Jet Launcher Compact for 2-wheel single ■ Size (total length x total width x rail width): 1920 x 850 x 300 mm
Total weight: 20kg
Frame weight: 9kg
■Material: Aluminum ■Notes: Sliding rails and hooks are standard equipment
If you are looking for only the handle pipe, the separately sold part number "JS201" is the corresponding part number.

Compared to the conventional J-1300, the frame can be easily disassembled and made compact because it is assembled with only pins. The handle pipe is angled downwards, making it easy to lift up! This item is rust-resistant, lightweight and compact.

[About payment and packaging]
This is a product shipped directly from the manufacturer. Only prepayment is available (cash on delivery is not available)
●Cannot be bundled

[Capacity] 1L steel can

It has excellent oxidation stability and reduces viscosity changes due to oxidative deterioration, ensuring stable output characteristics.
High cleaning dispersibility keeps the engine interior clean.
Suitable for general driving to sports driving.

KAWASAKI Kawasaki 4 cycle engine oil

Tie-downs are essential for fixing boats, jets, etc. at the transom.

●Material: Steel (metal fittings part)
●1 set of 2 pieces
●Belt width 50mm x length 1.2m

≪Set contents≫ Anchor, rescue anchor rope, bag

【anchor】
Effective for use in sandy areas, it is held in place by the weight of the anchor rather than hooked onto the ocean floor (river bottom).
This anchor is easy to handle and has a PVC coating on its surface to prevent scratches and rust on the hull.
■Weight: 5kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ18cm x body height approximately 21cm (excluding shackle)

*Please check the tightness of the shackle before each use.
*If it is loose, it may come off, so be sure to tighten it before use.

[Rescue anchor rope]
Unlike regular ropes, it is stretchy so there is no chance of it getting caught in the pump case.
The specially processed rubber absorbs strong impacts, allowing smooth towing, and even if you throw it into the water, it will float because it comes with a float.
■Comes with a mesh bag for convenient storage.
■Rope length: 2800mm when shortened to approximately 6000mm at maximum

[Original bag]
The highly stain-resistant and waterproof fabric is convenient for storing small items in outdoor situations.
There is a cushion pad all over the bottom, so it can also be used as an anchor bag.
It is okay to use a 6kg anchor.
The mouth opens wide, making it stress-free to put in and take out small items.
There is also a top button to prevent things from falling out.
■Product size: Bottom diameter 19cm x height 34cm

【please note】
*As this product is manufactured overseas, there may be unevenness in the PVC coating.
*Please check the tightness of the shackle before each use.
*If it is loose, please be sure to tighten it before use as it may cause it to come off. *The color and shape of the rope and float may vary depending on when they arrive.
*Photography accessories such as fenders are not included in the set.

[Information regarding delivery]
-Due to the shape of the product, some products cannot be bundled together.

Effective for use in sandy areas, it is held in place by the weight of the anchor rather than hooked onto the ocean floor (river bottom).
This anchor is easy to handle and has a PVC coating on its surface to prevent scratches and rust on the hull.

[Product specifications]
■Weight: 5kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ18cm x body height approximately 21cm (including shackle)

*Please check the tightness of the shackle before each use.
*If it is loose, it may come off, so be sure to tighten it before use.

[Please note] As this is an overseas product, the PVC coating may vary depending on the product.
[About delivery] Due to the shape of the product, some products cannot be shipped together.

It is effective for use in sandy areas, and is held in place by the weight of the anchor itself rather than being hooked to the ocean floor (river bottom).
The surface is coated with PVC, making it an easy-to-handle anchor that prevents scratches and rust on the hull.

[Product specifications]
■Weight: 3kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ15cm x body height approximately 17cm (excluding shackle)

【please note】
*Please check the tightness of the shackle before each use.
*If it is loose, please be sure to tighten it before use as it may cause it to come off. *As this is an overseas manufactured item, there may be unevenness in the PVC coating.

[Shipping information] Combining other products is not possible.

[Compatible models]
KAWASAKI Kawasaki ULTRA all models

●As this is a genuine part, the price may change without prior notice.

Old product number: 92072-3809

[In 2018, the white base has been changed to a black base. ]

■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

■Bolt size AxBxC: 80x63xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

[Support] From light to small size standards
*When used on a 4-seater PWC, only the hull will be protected.

Protect your precious boat with its trailer.

By completely covering the boat and trailer, it is difficult to tell that it is a boat at first glance.
Also recommended for crime prevention!
A trailer cover with a specially designed logo that is suitable for everything from light standards to small vehicle frames.
Made of Oxford 420D fabric with excellent strength, abrasion resistance, and quick drying.
■Size: Total length 5010mm x height 1400mm

[Disclaimer]
Please note that the design and color may change depending on the arrival time.

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●8φ×10m

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●By keeping the rope in a high position, you can tow easier and more easily.

●A spotter handle is built-in.

●Easy to store.

●Innovative LinQ system allows easy attachment and detachment.

●2018- Standard equipment on WAKE Pro model

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

This is a classic and popular glasses type model.
You can tow in two ways: vertically and horizontally, so you can enjoy it twice as much.
Since it is a compact two-person model, it has little air volume and storage space is also small.

■Size: 211×137cm
■Maximum capacity: 2 people ■2 towing points ■PVC tube & nylon full cover

[JSPTOKAI original square clear bag]
56L large capacity bag that can store 4 life jackets at once
The top can be opened wide with a U-shaped zipper to store marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
■Size: 50x45x25cm
■Fabric: Clear PVC black mesh