Collection: bestseller

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

●This is a replacement terminal.

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

JL15001SL Silver
JL15001GD Gold
JL15001R Red
JL15001OR Orange
JL15001LG Lime Green

●Outer diameter: approx. 8mm
●Inner diameter: approx. 5mm
●Length: Approximately 100cm

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

FACTORYZERO Factory Zero Jet Launcher
[Compatible products] For J-1480, J-1480-4, J-1480-4X
[Size] Width from center to center of pipe is 480mm

The handle pipe has an angle that bends downward, making it easier to lift it out of the water.
Factoryzero Jet Launcher Repair Parts

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

FACTORYZERO Optional item for jet bank manufacturers. Stronger than regular products by welding.

*Sold starting from 1 piece.
*If you are ordering one, please specify "left or right" when looking at the jet bank from behind.

[Product information]
●Cannot be bundled...In order to prevent scratches and damage, items cannot be shipped together (combined) with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (bundling)" is not possible.

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

●“Reinforced axle shaft kit” for heavy boats. 260mm.
●If you are towing with power, we recommend replacing it.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

■Contents: 420ml spray can

Dirt removal and shine wax.
Contains ultra-fine particle compound.
It removes dirt and repairs even minute scratches without adversely affecting dark painted surfaces.
It also maintains a strong gloss with high quality silicone wax.

■Contents: 420ml spray can

Excellent rust prevention properties for metals

For loosening rusted bolts and nuts.
Excellent water displacement performance, suitable for maintenance after riding in the rain on motocross cars and general cars.
Please use it for lubrication and rust prevention of various moving parts during vehicle delivery.
It can also be used as a moisture barrier for battery terminals, spark plugs, starter motors, etc.

■For 4-wheel SUV/LRV
■Total length x total width x rail width: 3,360 x 1,160 x 520mm

Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

■Standard 4 wheels with winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

Trailer slope rail, compatible with rail width 350 mm (rail center to center)

By installing a trailer slope rail, the JET can be raised and lowered smoothly, and the tail lamp, hose, etc. are not submerged in water, which prevents damage to the trailer and makes it last longer.
When not in use, it can be stored between the trailer and the PWC body.
To install, simply attach the rail guide (included) to the trailer body.

●By installing a trailer slope rail, you can smoothly raise and lower the boat, and the tail light, axle, etc., will not be submerged in water, preventing damage to the trailer and extending its life.
●Made of durable steel (iron galvanized) and 50 x 50 square pipe, so you don't have to worry about pulling it up with a winch.
(Please have 2 to 3 people support you when pulling it up. If you force it up using only the winch, it may cause damage to the winch.)
●When not in use, it can be easily stored between the trailer and the PWC body.
(Please note that depending on the boat or trailer, it may not be possible to store it, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle.
●For processing on the trailer side, simply attach the rail guide to the rear frame of the trailer using U bolts. (There is an installation confirmation at the end of the page)
*Please note that if the frame on the trailer side to be installed is low, the rear end of the slope rail will be close to the ground, which is dangerous.

Q. Is it possible for the "Rail Guide Section" to fit between the trailer's bank rails and be attached to the rear end frame?
The rail guide part size is 420 mm in total horizontal length.
The U bolt size for installation is 112 mm effective width and 76 mm depth.
Especially if the R shape is quite deep on the rear end frame, the U bolt may not fit.
In that case, it is possible if you prepare a larger U-bolt etc. separately.
*If installed on a frame with a tight radius, the bottom of the boat may hit the rail guide.
In that case, raise the bank rail and adjust. We recommend that you check the size of the rail guide parts using a dummy in advance.
*If there is a license plate etc. on the mounting part, it is necessary to move the plate etc. (Other than public roads)
*Depending on the compatibility of the boat and trailer, it may not be possible to store the rail.
The space for the rail to pass through after installation requires a gap of approximately 85 mm in height and 71 mm in width.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment (bank transfer) only. (Cash on delivery not available)
●Cannot be bundled

●Adaptation: Kawasaki 1500SX-R
●Size 1400×360×300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

The extra-thick round pipe joint and strong frame design allow for safe use. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
It can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Adaptation: PWC up to 3 people
●Size: J-345SX 1400x380x450mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

racing beach stand runabout

It has a strong frame design with an extra-thick round pipe joint and a total of 4 W belts on one side to prevent opening, so it can be used safely even on heavy boats. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Applicable: Single boat only
●Size: J-333SX 970x350x300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: J-333SX is equipped with a PVC cover as standard

racing beach stand single

The round pipe joint makes the frame even stronger, so you can use it with confidence on your precious boat.
In addition, the rail part has a PVC cover, so the boat can be easily mounted without getting scratched.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Model Number] J-1480X / Jet Launcher 2-wheel rail width 480mm type [Suitable for] Tandem / Runabout models

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 22kg
Frame weight: 10kg

Made of aluminum, it is lightweight and rust-free, and each joint is bolted and welded for excellent durability.
Nylon roller bearing plastic wheels and block pattern tires make it easy and smooth to move around!
It is 30mm wider than the previous 450mm width.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

■4 wheels with strong stainless steel winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,200 x 960 x 661mm
■Frame: 70mm square
■Caster diameter: 150Ф

The 4-point support prevents front and back misalignment, making sling belt work easier.
Uses flexible and fixed casters of 150φ, allowing smooth movement over a long period of time.
Also, due to its large diameter, it rolls smoothly.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: J-210 PWC up to 3 people
■Total length x width x height: 1350 x 709 x 275mm (rail width: 440/340mm)
■Frame: 380mm square
■Caster diameter: 100Ф

*"J-209 Maintenance Stand High Grade" is recommended for boats weighing close to 500 kg.

Lowering the rail section improves runabout maintenance work efficiency!
The rail width is adjustable and all casters have stoppers.
Made of aluminum and specially anodized, it is lightweight and will not rust.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,340 x 955 x 410mm (rail width: 580mm)
■Frame: 70mm square
■Caster diameter: 125Ф

Since it uses anodized corrosion-resistant aluminum pipe (high strength pipe with center rib), it can be used with confidence even on lightweight and sturdy 500kg class boats.
Comes with a hook and rope to prevent it from slipping off.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■J-203S Single
■Total length x width x height: 1416 x 590 x 600mm (rail width: 300mm)
■Caster diameter: 100Ф

With a height of 600mm, this stand makes maintenance work on single boats easy.
The beautiful surface finish with special alumite treatment is perfect for display.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Compatible] Kawasaki SX-R (2017-)/SEADOO Spark, etc.
[Model Number] J-150S / Jet Launcher 2-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
Total weight: 23.5kg
Frame weight: 12.5kg
■Material: Aluminum

[About payment and packaging]
Manufacturer direct delivery products
●Payment only (cash on delivery not available)
●Cannot be bundled

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

big horn

[Compatible models] UBS69, 25GW, 55FW, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This is a stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Odyssey

[Compatible model] RC1

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Step Wagon *The rear hatch cannot be opened or closed without removing the ball mount, and the wiring socket cover may interfere depending on individual differences.

[Compatible models] RP3/4/5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Requires drilling Rear hatch cannot be opened or closed without removing ball mount, wiring socket lid may interfere due to individual differences
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.