Collection: bestseller

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

[Applicable models] KAWASAKI 750 / 800SX-R / 800X-2

Unique angle (3.2 degrees) increases intake efficiency,
The one-piece structure also enhances the sense of unity between the carburetor and intake manifold.

[Compatible models]
KAWASAKI Kawasaki 4st ALL
Compatible plug cord: Φ7~9mm

*Delivery time is approximately 2 weeks after ordering.
[Kit contents]
- 4 types of conductive spiral tubes (approximately 340, 500, 600, 700mm),
-Earth cord 180mm x 4,
●Cord clamp x 4,
-Screw M4-12, nut M4, spacer x 4 each
- Cable ties x 8

Conductive spiral tube with special plating.
By installing it, the spark plug voltage of CDI ignition model will increase by about 20%!
It is possible to boost the discharge voltage of the spark plug by wrapping it around the plug cord and grounding it.

When the engine is running, the plug cord constantly generates noise as a reaction to the flow of electricity.
By organizing the noise (magnetic field), the reaction is reduced and a more powerful spark is created.
It brings absolute effects to everything from normal engines to racing engines.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

[Compatible models] Yamaha FX models from 2012 onwards

■Material (pipe): Made of titanium

located between the water vehicle's water box and the hull exit.
Replace your restrictive sound suppression system.
Improves engine performance by reducing back pressure and harmful detonation.
Full titanium tube that is resistant to corrosion and lightweight.
A replacement coupler made of high temperature silicone is included.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Compatible models]
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)

■Material (pipe): Titanium

Between the water vehicle's water box and the hull outlet,
Replaces restrictive sound suppression systems.
It reduces back pressure and harmful detonation, improving engine performance.
The tubes are made entirely of titanium, which is both corrosion-resistant and lightweight.
Replacement couplers made from high temperature silicone are included.

*For models from 2023 onwards, the Siphon Break Delete Kit ( RS10123-SBD ) is required separately.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

[Compatible models]
Yamaha GP1800/VXR/VXS models from 2011 onwards

■Material (pipe): Made of titanium

located between the water vehicle's water box and the hull exit.
Replace your restrictive sound suppression system.
Improves engine performance by reducing back pressure and harmful detonation.
Full titanium tube that is resistant to corrosion and lightweight.
A replacement coupler made of high temperature silicone is included.

[Compatible models]
Yamaha GP1800/VXR/VXS models from 2011 onwards

■Material (pipe): Aluminum

located between the water vehicle's water box and the hull exit.
Replace your restrictive sound suppression system.
Improves engine performance by reducing back pressure and harmful detonation.
Mandrel-bent aluminum tubing, powder coated to prevent corrosion
A replacement coupler made of high temperature silicone is included.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Compatible models] Yamaha FX models from 2012 onwards

■Material (pipe): Aluminum

Replaces the restrictive sound suppression system between the water vehicle's water box and the hull exit.
Improves engine performance by reducing back pressure and harmful detonation.
Mandrel-bent aluminum tubing, powder coated to prevent corrosion
A replacement coupler made of high temperature silicone is included.

[Compatible models]
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)

■Material (pipe): Aluminum

It replaces restrictive sound suppression systems located between the water vehicle's water box and the hull outlet.
It reduces back pressure and harmful detonation, improving engine performance.
Mandrel bent aluminum tubing that is powder coated to prevent corrosion,
Replacement couplers made from high temperature silicone are included.

*For models from 2023 onwards, the Siphon Break Delete Kit ( RS10123-SBD ) is required separately.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO ('07-)GTX4-TEC/SC/RXT/RXP/RXT-X/RXP-X/GTR215
*2016 suspension model
*300 series cannot be used

●Removing the genuine exhaust resonator reduces weight, smoothes the flow of exhaust, improves performance at medium and high speeds, and allows you to enjoy changes in volume.

●The end of the pipe is textured to prevent the hose from coming off.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

■Quantity: 1 piece
■Size: 8×35mm

Used when linking MIKUNI carburetor.
Compared to other linkages, it has less trouble and is more durable.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

【correspondence】
Can be installed on runabout models
Compatible with 28.6mm handle clamp

【type】
Handle diameter: Clamp mounting part 28.6mm,
Grip/lever mounting part 22.4mm

●The clamp part is thick and flexible, making it a wide handle with excellent flexibility and strength.
●Wide handle has sufficient rigidity and is coated with carbon Kevlar.
★Also available in silver without carbon coating (UL049).
*A separate fat bar clamp (UL061 recommended) is required for installation.

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

[Compatible models] Kawasaki Kawasaki
ULTRA250X('08-)
ULTRA260X/260LX
ULTRA300X / 300LX(※)
(*) When installing the ULTRA300 series... 1 silicone coupler [Product number: UL14105] is required separately.

By replacing the back of the water box outlet with aluminum, ventilation efficiency will be increased.
Radiant heat from the exhaust pipe is reduced, contributing to weight reduction, and the billet exhaust end creates a stylish rear view of the hull. The joint uses silicone hose [UL14101], which has high heat resistance, pressure resistance, ozone resistance, and resistance to deterioration.
Also, if you use the T-bolt clamp [JL0288/JL0250] together, you won't have to worry about it coming off.

[About installation] No processing required, bolt-on OK
(Bolts are not included, so please use genuine ones.)

【set content】
- End pipe x 1,
-Joint pipe x 1,
●Joint hose Φ70×70mm×1,
●Silicone hose variant Φ50-Φ70×100mm×1,
●Hose band x 2

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm

[Manufacturer] VOLVO
[Car model] Volvo V90 Cross Country
[Compatible car model] DBA-PB420
[Year] H29.2~
[Compatible grade] T5AWD

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] K-2
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

Kawasaki 800SX-R

Compared to genuine products, they are lighter, stronger, and cheaper.
When worn, it creates a streamlined and lacy impression.

[Material] FRP
[Quantity] 2 pieces 1 set
[Installation] Bolt-on

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

[Manufacturer] LAND ROVER
[Car model] Discovery
[Compatible car model] LT56A/94A
[Year] H11.6-H17.4
[Compatible grade] XS Plus

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] R-1
[Processing] K-1
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] JEEP
[Car model] Grand Cherokee
[Compatible car model] WH47/57
[Year] H17.7-H23.3
[Compatible grades] WH47: Laredo, WH57: OVERAND [Supplement] Notes on processing the inside of the bumper and when installing and removing the bumper

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] R-1
[Processing] D-2/3
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] DAIHATSU
[Car model] Hijet Cargo
[Compatible car model] LE-S330V EBD-S321V/EBD-S331V EBD-S331W 3BD-S331V
[Year] H16.12~
[Compatible grades] Cruise Turbo, Deck Van (EBD-S331W), Deluxe SAIII (3BD-S331V) [Supplement] Depending on individual vehicle differences, hole enlargement of the vehicle bracket may be required. Atrai wagon cannot be installed

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-1
[Processing] T-4
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Jumbo (4WD), air conditioner/power steering special (4WD/2WD)
[Compatible car model] EBD-S211P/EBD-S201P
[First year registration] H19.12 - H22.7

Jumbo, Standard [Compatible vehicle models] EBD-S500P (2WD)/EBD-S510P (4WD)
[First year registration] H26.12~

[STANDARD (made of steel)]
Chic black finish.

[Traction force] A (less than 500kg)
[Estimated installation time] Approximately 3.5 hours

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5 m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped by the shipping company's office *Delivery to corporations/companies and limited delivery to some private homes We cannot accept the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

[Manufacturer] SUZUKI
[Car model] Carry
[Compatible car model] DA63T
[Year] H17.8~H25.8
[Compatible grade] KC

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-2
[Processing] K-1
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

■Size (hose spigot): Outer diameter 15mm, inner diameter 7mm

Straight socket for waterline one-touch coupler

[Manufacturer] SUZUKI
[Car model] Crosby
[Compatible car model] DAA-MN71S
[Year] H29.12~
[Compatible grade] HYBRID MZ, HYBRID MX [Supplement] 4WD only

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-1
【processing】-
[Drilling] 2
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] SUZUKI
[Car model] Hustler
[Compatible car model] DBA-MR31S
[Year] H26.1-H29.5
[Compatible grades] A, G, G Turbo, X, X Turbo [Supplement] 2WD installation not confirmed

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-1
[Processing] D-3
[Drilling] 2
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] JEEP
[Car model] Cherokee
[Compatible car model] 7MX
[Year] H2.12-H11.12
[Compatible grades] Sports, Laredo, Limited

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] LTDⅡ
[Processing] T-4
[Drilling]-
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] SUZUKI
[Car model] Jimny
[Compatible car model] GF/GH/TA/ABA-JB23W
[Year] H10.10~
[Compatible grades] XA, XL, XC, XG, J2, L (can be installed up to 6 types/660cc only), Land Venture (7 types), XG (8 types)

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-1
【processing】-
[Drilling] 2
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.