Collection: bestseller

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

■Boat Power Holder A clamp for holding fast-acting rods.

■If you set it on another rod in advance, you can easily change the rod and it is very convenient.

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

●Genuine SEA-DOO fender that is ready to be attached and detached

●Fluorescent orange body with excellent visibility

●2 pieces/set

●When using this snap-in fender, a special installation kit must be installed on the hull in advance. (*Not required for SPARK.)

※※ Sold separately ※※
[Compatibility]
●SEA-DOO iBR model before 2017 model
Requires Snap-In Fenders Installation Kit (Part number: 295100550)

●RXT, RXT-X, GTX and WAKE Pro (2018)
Requires Snap-In Fenders Installation Kit (Part number: 295100729)

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

-Material: Steel (black paint)

-Mounting hole size: 13-14.8cm x 13-14.8cm

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 25Ф pipe

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 1" x 14 screw threads

●Made of stainless steel

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

●A tool for crimping bands on fuel hoses, engine boots, etc.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●SEA-DOO genuine wear ring 159mm

[Compatible with] SEA-DOO 260/255/215

■Boat base attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Dimensions: 60 x 101 x thickness 22mm

■Material: SUS316

*Mounting bolts are not included

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 1" x 14 screw threads

●Made of stainless steel

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to the left and right to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 123x length 20x height 26x rope opening width 14x mounting hole distance 85mm

●SEA-DOO genuine wear ring 155mm

[Compatible with] SEA-DOO pump diameter 155.5

[Representative model] GTX 4-TEC ('02-'03)/951 model

●Upgrade hardware kit essential for using LinQ bag TUNNEL BAG (product number: 860201740) in seawater.

●LinQ hardware kit includes highly corrosion-resistant stainless steel parts

●Easy and quick installation

*Standard equipment for LinQ Cooler cooler box

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●Can be installed on either flat or side surfaces.

●For 1" x 14 screw threads

●Made of stainless steel

[Adaptation] SEADOO 800/951 engine
●A support tool used when removing flywheel bolts.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1. Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" inside the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

■It is a rail attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Used when installing a boat power holder on a 19-32Ф rail.

■Long arm, sturdy system, and the pinnacle of high-performance rod holders.

■If you set the quick clamp on another rod in advance, it is very convenient as you can easily change the rod.

■A best-selling, sturdy and easy-to-use rod holder that can also be used for outrigger fishing.

■It can be easily installed on the deck with 4 screws, so there is no need to worry about water getting into the boat.

■The angle and direction can be adjusted with the knob.

■Made of stainless steel

■Mounting base: 70×120mm・Pipe inner diameter: 40.4φ

●Genuine parts (OEM) part number: 292002022

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece

●A retractable stand bar to prevent falls and damage to the license plate when washing the car without connecting the trailer to the car or maintaining the jet.

●Equipped with rubber that prevents rattling and chattering noises when running, making it extremely quiet.

■Material: Steel plating
■Mounting plate and bolt set included
*Maximum 50cm

Tire & base only *The base part has been changed to black.

■For TIGHTJAPAN stopper jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, stroke amount: 280mm

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Stainless steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Made of steel★Black painted
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material Tower: Stainless steel Winch: Steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

*If you are looking for stainless steel mounting bolts, please use [Product number: 0908-01 (sold separately)].

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●Tight Japan genuine product.

■Material: Aluminum

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

●Hitch ball diameter: Compatible with 1-7/8", 2", 2-5/16".

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-80
●Total weight: approx. 1.7kg
●Drug amount: 0.8kg
●Protection volume: 4 cubic meters
- Total height: approx. 265 mm, total width: approx. 97 mm, depth: approx. 102 mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 4 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4299
●Validity period: 6 years

*Includes recycling fee.

[Product specifications]
■Material: Plastic resin
■Size: Width 162x Height 42x Depth 65mm

●Resin handle that can also be used as a step.
●Fix to the transom etc. with screws, etc.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-150
●Total weight: approx. 4kg
●Drug amount: 1.5kg
●Protection volume: 8 cubic meters
- Overall height: approx. 475mm, overall width: approx. 110mm, depth: approx. 107mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 6 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport model No. 4142
●Validity period: 6 years

【please note】
*Recycling sticker is not attached.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 575 x Width 355 x Height 330mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

[Product Specifications]
■Ideal for carrying spare fuel! Since it is a plastic tank, there is no need to worry about rust, and it is lightweight and easy to carry.

■The included nozzle has an air intake vent, allowing you to pour fuel smoothly.

■Size: Approx. 265 x 250 x 135 mm
■Aperture: Φ40mm
■Material: HDPE (high density polyethylene)
Capacity: 5 liters

*The product is a hazardous materials transport container that complies with international recommendations (UN standards) regarding the international transportation of hazardous materials.
*Although this product is UN certified, it may not be possible to fill it up at gas stations, including self-service stations.
*This product cannot be refueled and transported in a passenger vehicle for the purpose of using it as automobile fuel. (*1)
*This product cannot be used for refueling for storage purposes (*2).

(*1) Notification prescribing details of technical standards for the control of dangerous goods (Article 68-4), Regulations on the Control of Hazardous Materials (Article 43-2)
(*2) Fueling for storage purposes refers to fueling for stockpiling. This does not apply if the purpose is to use it immediately. There is no clear definition of the time between refueling and use.

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 610 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

●An hour meter that detects the ignition signal of the gasoline engine and measures the cumulative operating time of the engine.
●Measurements can be made by simply wrapping the included antenna lead wire around the spark plug cord.
●With reset function to return the count to 0

【Product details】
*Cannot be used with diesel engines and direct ignition types.
■Dimensions: L30 x W30 x H15mm
■Body weight: 15g
■Accessories: Antenna lead wire (50cm)
■Daily waterproof specifications
■Measurement method: Pulse sensing method
■Measurement time: Maximum 9999 hours 59 minutes
■Battery life: Approximately 5 years
■Using temperature: -10℃～+60℃

[Compatible models] SEA-DOO
GTI (06-10)
GTI SE (06-10 model)
WAKE155(09～10)

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●Displayed prices Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

●Series: CONCORD
●Pitch size: 18/22
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (SLA009)

[Compatible models]
VX / VXsport / Vx deluxe / VX crusier stock engine (normal boat)
V1 / V1sport stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

■Quantity: 1 piece
■For shaft Φ25

*For hub seals, please prepare your vehicle inspection certificate, etc., and then contact us after measuring the actual product you have.
Please let us know if you are using it for innerwear or outerwear.

*Hub seal is sold separately [Part number 0605-01].

■Quantity: 1 piece
■Seal inner diameter: 31mm
25φ, 28φ: For light vehicles

●Width 265mm.
●Material: ABS
■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-06 Air fender 1 wheel