Collection: 純正/社外 部品

color plug cap
●Quantity: 1 piece

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

■Material: Brass
JL003-6: 1/8×1/8 pulse 90° (threaded part 10mm: P0.9: outer diameter 7mm)

●A freely bendable bellows hose that connects the bilge pump and the Suruhal.

●Lightweight corrugated hose that does not collapse even when bent when handling.

●Can be easily cut with a cutter.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 100cm
■Hose diameter: 19.0mm

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 500GPH (31.5 liters/min)

●Power supply: DC12V/3.0A

●Compatible with inner diameter 3/4" (19mm) hose

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 1100GPH (69.3 liters/min)

●Power supply: DC12V/5.0A

●Compatible with 1-1/8" (28.5mm) inner diameter hose

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×6×6mm
Inner diameter 4×4×4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter: 6x6x6mm
Inner diameter: 4x4x4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×8×8mm
Inner diameter 4×5×5mm

■Size: Outer diameter 15mm, inner diameter 7mm

Takenoko elbow socket for waterline one-touch coupler

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

[Quantity] 2 pieces
This is a pin blind seal.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

●This is a replacement terminal.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

1/8 x 1/8 x 1/8 outer diameter 4mm inner diameter 1.8mm.

Attach between cooling hoses and use when changing routing or creating a bypass line.

●Ignition coil for SEA-DOO ROTAX 1630 ACE/ROTAX 1500 HO ACE/ROTAX 900 HO ACE.

●Equivalent to genuine parts (420666142)

●Repair parts

Fish Pro 155 1503 2019
GTI 130 Rental 1630 2020
GTI LTD 155 1503 2017
GTI P LTD 155 1503 2018
GTI P SE 130 1503 2018
GTI P SE 155 1503 2018
GTI P SE 90 900 2018
GTI P STD 90 900 2018
GTI SE 1503 2019
GTI SE 130 1503 2017
GTI SE 130 1630 2020-2021
GTI SE 155 1503 2017
GTI SE 170 1630 2020-2021
GTI SE HO 900 2017
GTI SE NA 1503 2019
GTI STD 1503 2019
GTI STD 130 1630 2020-2021
GTI STD 155 1503 2017
GTI STD 90 900 2020-2021
GTI STD HO 900 2017-2019
GTI STD Rental 1503 2019
GTR 230 1630 2020-2021
GTR P STD 230 1503 2018
GTR PX 230 1503 2018
GTR STD 230 1503 2017
GTR STD HO 1503 2019
GTR X 230 1503 2017
GTR X HO 1503 2019
GTS HO ​​900 2017
GTS P STDR 90 900 2018
GTS STDR HO 900 2017
GTX Fish Pro 170 1630 2020-2021
GTX LTD 230 1503 2017
GTX LTD 300 1630 2016-2021
GTX LTD HO 1503 2019
GTX P LTD 230 1503 2018
GTX P STD 155 1503 2018
GTX P STD 230 1503 2018
GTX STD 130 Rental 1630 2021
GTX STD 155 1503 2017
GTX STD 170 1630 2020-2021
GTX STD 230 1630 2020-2021
GTX STD 300 1630 2021
GTX STD HO 1503 2019
GTX STD NA 1503 2019
GTXS LTD 260 1503 2017
GTXS STD 155 1503 2017
RXP PX 300 1630 2018
RXP P XRS 300 1630 2018
RXP X 300 1630 2016-2021
RXP XRS 300 1630 2017-2021
RXT P STD 230 1503 2018
RXT PX 300 1630 2018
RXT P XRS 300 1630 2018
RXT STD HO 1503 2019
RXT X 300 1630 2016-2021
RXT XRS 300 1630 2017-2021
Spark 2Up 900 2015-2021
Spark 2Up HO 900 2015-2020
Spark 3Up HO 900 2015-2020
Spark NA 900 2014
Spark TRIXX 2Up 900 2017-2021
Spark TRIXX 3Up 900 2017-2021
Wake P Pro 230 1503 2018
Wake P STD 155 1503 2019
Wake Pro 230 1503 2017
Wake Pro 230 1630 2020-2021
Wake Pro HO 1503 2019
Wake STD 155 1503 2017
Wake STD 170 1630 2020-2021
Wake STD NA 1503 2019

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.