Collection: 純正/社外 部品

【適合機種】
SEA-DOO
 RXT-X300 (2018~)
 GTX-LTD 300 (2018~)
 WAKE PRO 230
 GTX 230 / 170 / 155 (2018〜)
 GTR230 (2020~)

●ボルトオンで穴あけなど加工は不要です。
●SEA-DOO純正品 水上オートバイ用ガソリン携行タンクです

BELLOW

SEA-DOO genuine part number (OEM): 268000186 etc. IBR boots for SEA-DOO
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.
*The location used is number 50 in the third photo.

Equivalent to genuine parts (OEM part numbers: #295501204 #295501198)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models]
SEA-DOO 300 horsepower model & 2018 and later models *Excluding SPARK
[Information] Please select and use a compatible product. --
●300 horsepower model & 2018 and later models *Excluding SPARK...Product number: 420956744★
●260/255/230/215/185/155/130 horsepower model ~ until 2017...Product number: 420956741
●SPARK...Product number: 420956123

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

This is a genuine supercharger overhaul kit for SEA-DOO 255/215 horsepower (16Tooth).

OEM #: 420881102

[Compatible models]
MakeModelCC/HPYear
Sea-DooGTR 21515032012-2016
Sea-DooGTX LTD Super Charged 21515032006-2016
Sea-DooGTX LTD Super Charged 25515032009
Sea-DooGTX LTD Super Charged 26015032010-2016
Sea-DooGTX Super Charged 21515032008-2013
Sea-Doo GTX Wake Pro 21515032009-2016
Sea-DooGTX Wake Super Charged 21515032007-2008
Sea-DooRXP Super Charged 21515032006-2009
Sea-DooRXP X 25515032008-2011
Sea-DooRXP X 26015032012-2015
Sea-DooRXT is 25515032009
Sea-DooRXT is 26015032010-2012
Sea-DooRXT Super Charged 21515032006-2010
Sea-DooRXT X 25515032008-2009
Sea-DooRXT X 26015032010-2016

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

SEA-DOO RXT/GTX 02-09)

Cheaper than genuine parts! !

●SEA-DOO RXT/GTX 02-09) Reverse cable

*Equivalent to genuine part number 268000030

Tether for YAMAHA

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Applicable] Hose inner diameter 16 to 18φ
[Size] Inner diameter 14mm Threaded part outer diameter 26mm

The models below can be easily connected to a water hose with a hose adapter.
SEADOO
●Models equipped with 951 engine (RX, XP, GTX, etc.)
●GTX4-TEC ~RXT

*This is the same product as the conventional GES0616 gray.

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

●YAMAHA genuine parts

●Waterproof battery switch set for MJ FX, VX, EX series

●Set contents: Parts necessary for installation such as battery switch body, power cable, screws, etc.

【 specification 】
Rated voltage: DC12V Rated current: Maximum 60A

●A waterproof battery switch set that allows you to easily turn on/off the battery power of your marine jet.

●Eliminates the hassle of removing the cable from the battery terminal when the marine jet is not in use.

●In addition to the switch, all the parts necessary for installation such as power cables and screws are included.

[Compatible models] YAMAHA
Yamaha 4-stroke FX (excluding FX-SHO/FZR/FZS)/VX
(※)Cannot be used for FX- SHO / FXR /FXS

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] YAMAHA
FX140/160/VX(09～)
Compatible with vessels with a displacement of 1800cc or less

[About oil filters]
Inside the engine, there is sludge generated from impurities in the fuel and oil,
Metal powder and other particles are generated due to friction between the cylinder and piston rings.
Engine oil washes away any oil that is produced, allowing the engine to continue functioning normally.
However, repeated use over a long period of time can cause engine oil to become dirty and deteriorate.
It cleans through a filter and prevents dirt from re-adhering and deterioration.
The role of the oil filter is to maintain the oil's life cycle for a long period of time.

[Notice] When removing, please use the separately sold tool "Part number: Q5W-MIT-001-088".

[Compatible with] SEA-DOO pump diameter 159mm 260/255/215

●WSM stainless steel wear ring 159mm
●OEM #267000372

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.

Cheaper than genuine parts! !

●SEA-DOO end fitting

*Equivalent to genuine part number 269501717

●Easy to purchase and economical, essential for improving engine durability.

[Compatible models] KAWASAKI 800 / 750 (excluding 92-99Zxi) / 650 (86-96)
Kawasaki SC 650 1991-1995
Kawasaki SX 650 1987-1993
Kawasaki TS 650 1989-1996
Kawasaki X2 650 1986-1995
Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki SX-R 800 2003-2011

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
KAWASAKI Kawasaki Ultra150/1200STX-R Front
*Ultra150/1200STX-R requires 1 piece for the front (product number: 011-102) and 2 pieces for the rear (product number: 011-103).

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●SEA-DOO oil filter cover
●External O-RING

Genuine product number #420850500 compatible

●Compatible models: KAWASAKI
800SX-R/800X-2
SX-R 800 2003-2011
X-2 800 2005-2006

top end gasket kit
Required during engine overhaul
■Head gasket,
■Base gasket,
■Intake gasket,
■This is an exhaust gasket KIT.

[Compatible model] YAMAHA 1200ALL(65U)

Yamaha GP1200 1997-1999
Yamaha SUV1200 2000-2002
Yamaha XL1200 1999

[Quantity] 1 piece
[Applicable models] Kawasaki 1200 / 1500 03-18
Kawasaki STX-12F 1200 2003.2004.2005.2006.2007
Kawasaki STX-15F 1500 2004-2007
(2004.2005.2006.2007.2008.2009.2010.2011.2012.2013.2014.2015.2016.2017)

Kawasaki Ultra 250X 1500 2007-2008
Kawasaki Ultra 260LX 1500 2009-2010
Kawasaki Ultra 260X 1500 2009-2010
Kawasaki Ultra LX 1500 2007-2017

OEM#11061-0813

PUSH BUTTON RED

SEA-DOO genuine part number (OEM): 277002327 etc.

●Stop/start button for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 190 in the second photo.

Compatible with SEADOO 1503, 1630cc 2009-2022 models (*Excluding 2009RXP-X255, 2009RXT-X255, SPARK)

●Genuine product number (OEM): 420892592 etc.

●SGS Throttle Body●This is an inexpensive aftermarket part for repair with performance equivalent to genuine parts.

●Genuine part number (OEM): 269501984 (old part number: 267000917)

●SGS end fitting●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

●SEA-DOO Pump Repair Kit

The genuine SEA-DOO part number (OEM) is as follows: ① 267000900 Angle bearing
② 293300086 O-ring Quantity: 2
③ 271002071 Seal
④ 293370038 Circlip
⑤ 293200089 Oil seal Quantity 2
⑥ 293300090 O-ring

For SEA-DOO 4-stroke 155mm pump (for 185/155/130 horsepower)
[Compatible] SEA-DOO pump diameter 155mm
[Representative models] GTX155('04-) / GTX SC 185 / WAKE155 / GTI155 / GTI130

●Genuine part number (OEM): 267000419 (old part number: 267000104)

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

SENSOR PRESSURE AND TEMPERATURE AIR
●Genuine parts (OEM: 515178563)

●SGS Pressure and Temp Sensor ●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4 stroke temperature sensor
LIQUID SENSOR

●Genuine product number (OEM): 278002895 etc.

●SGS Tempture Sensor LIQUID SENSOR
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.