Collection: merchandise

The Romper Slash with back zipper is available only in baby sizes.
Protects your little one's body from cold and scratches.

This is an essential item for sun protection, as children have less melanin pigment than adults and are therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

*Returns and exchanges are not accepted for special price items.

■【Applicable size】
80cm : 70-90cm
90cm : 80-100cm
100cm: 90-110cm

This is a 2-piece set that includes a zip lash top and lash pants.

Made of material that blocks more than 99% of harmful UV rays, the slightly thin fabric is soft and stretchy, and fits snugly to your body for maximum comfort.
A rash guard is an essential item that not only protects your child from harmful UV rays, but also protects your child's skin from scratches and jellyfish.
You can also create a complete coordination with the hats and shoes sold in the series.

■Rash guard Has a front zipper so it can be put on quickly and even children can easily put it on and take it off by themselves.
The inside is lined with padded fabric, so you can wear it directly against your bare skin.

■Rush Pants Made of stretchy body-fitting material, these pants don't get stiff and have excellent athletic performance.
Recommended for water play such as pools, beach bathing, and baby swimming.
The fabric is slightly thicker (80 ounces) than the top's rash guard for increased durability.
The inner front and inseam areas are made of soft, fine-grained inner mesh that prevents chafing.The long length prevents sunburn on the thighs.

[Material] 88% nylon, 12% polyurethane

[Size] 100cm.120cm.140cm.150cm

*Accessories worn by child models for image shooting are not included.

This is a special price for clearing stock.
This life jacket is made from the same material as a wetsuit, so it is gentle on delicate skin.

■2mm Chloroprene

■ Suitable height size
S:110-130cm
M:120-140cm

●This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

This is a marking buoy that is ideal for setting up courses for marine sports.
It can also be used as an anchor marker.

■Diameter: Approx. 20-25cm

[Note] Air injection nozzle is not included.

*Please purchase the air injection nozzle (part number: 97560) separately.
*The product will be shipped deflated.

JETPILOT brand CAP
The brim is arched and has a logo patch on the front.
You can also adjust the size with the strap on the back.
The simple and natural design goes well with any outfit.

■Free size

Board shorts made of stretch material with accent piping and a simple logo patch finish.

Chris O'Shea's signature model.

1. Tech washer tie closure ■Waist size 28 inches (74-78cm)
2. Taped and scalloped block on dual front pockets
3. Sublimated body
4. Back zipper pocket
5. High stitch count patch
6. Lycra fly
7.Triple stitch crotch panel■Length is 19 inches (48.3cm)

30 inches (78-82cm)
32 inches (82-86cm)
34 inches (86-90cm)
36 inches (92-96cm)
*Please note that the applicable size varies depending on the waist design and specifications.

[Please note] As this is a special price item, we cannot accept returns or exchanges.

[Adapted model] SEA-DOO
RXT-X300/230 (2018~)
GTX LIMITED 300 (2018~)
GTX 155/230(2018 ~ )
WAKE PRO (2018~)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-15B black only

This "waterproof soft case" is useful in a variety of situations, both indoors and outdoors, for various purposes such as protecting your smartphone from water and dirt, or preventing you from operating it with dirty hands.
It protects the device from sand stains and water damage when swimming in the ocean.
It also protects the device from water getting inside even if it is continuously submerged in water.
The front and back of the case are clear, so you can take photos and videos with the camera in the case regardless of the position of the lens.
The sides are also clear, so you can still operate your smartphone's side buttons.

■ Body size: H204 x W113 x D15mm
■Maximum size supported: 151x81mm
Weight: 57g
■Material: ABS/PVC
■Accessories: Neck strap x 1

Completely waterproof and dustproof (IP68), passed 30m water depth test: Obtained the international dustproof and waterproof standard "IP68".
It meets the criteria of "no dust can get inside (dustproof)" and "no water can get inside even if it is continuously submerged in water (submersible)," and has passed a 30m submersion test, making it waterproof and dustproof according to IP68. *This product will only remain waterproof if it is securely sealed.

Most of one side is transparent, allowing you to tap and flick while your smartphone is inside the case.
When completely sealed, it floats on water and does not sink, so it can be used safely near water.

You can still make calls and perform tap and flick operations even while the phone is in the waterproof case.
You can send emails, watch videos, search the web, and more without having to take out your smartphone.
It is also designed to make it easy to open the lock even when your hands are wet.
*Do not touch non-waterproof devices such as smartphones with wet hands.

Jet ski, watercraft, water bike, surfing, diving, bodyboard, wakeboard, wakesurfing, kiteboard, flyboard, SUP, windsurfing, kayak, canoe, snorkeling, marine sports, trekking, board, fishing, sea, river, lake, travel, pool, bathing, gym, resort

Unisex design T-shirts
UNLIMITED original material: 95% cotton, 5% spandex
The "hybrid fabric" has a firm texture and is smooth and comfortable to wear.

Made from quick-drying, highly stretchable material, it is extremely comfortable to wear and perfect for active summer activities!
This is an amphibious dry TEE.

It keeps you dry even when you sweat, and its stretchy and UV-blocking properties support your activities comfortably.

The smooth, easy-to-move-in fabric is quick-drying and sweat-absorbing, so even if you sweat, it will quickly dissipate, making it comfortable to wear at all times.

■ Flat measurements (shoulder width / length / waist circumference)
XS: 43 / 66 / 92cm
S: 45 / 68 / 96cm
M: 48 / 70 / 100cm
L: 49 / 72 / 104cm
XL: 50 / 74 / 108cm

Jet ski, watercraft, personal watercraft
Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayaking Canoeing Snorkeling Fishing Marine sports Snowboarding Trekking Outdoor Glamping

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] Sea-Doo
SEA-DOO 2009 and later models equipped with electronic throttle (iTC) and I-brake (IBR) system
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[Product Name] iTC iBR LEVER KIT iTC iBR LEVER KIT

By making the lever end part flip up, the grip on your fingertips increases and prevents your fingers from slipping out! A sophisticated and stylish lever made from machined aluminum.

By creating a drill hole in the lever part and making the lever end part flip up, the grip on the fingertips increases and prevents fingers from slipping out.
This unique trigger shape pursues racing.
■Machined aluminum

UL33002SL Silver
UL33002RD Red
UL33002YL Yellow

●SEA-DOO (Can be used when using an aftermarket grip with the genuine handlebar)

*Cannot be used for RXT, GTX, WAKE, etc. after 2020

*Compatible with UNLIMITED lock grip series and grips made by other companies.

[Product name] SD bar end kit
[Material] Made of aluminum
[Quantity] 2 pieces

●When changing to an aftermarket grip with SEA-DOO, it compensates for the lack of the genuine handlebar and allows for reliable tightening. It is also necessary to prevent the grip from coming off.

UL32101SL Silver
UL32101BK Black
UL32101BL Blue
UL32101RD Red

[Compatible] Can be installed on runabout models *Depending on the arrival time, the logo may not be displayed. note that.

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 7900mm
■Handlebar clamp area: 170mm
■Grip end position: 110mm

The wide handle allows for aggressive riding.
The handlebar is made from aluminum alloy, which is also used as an aircraft material, to make it even stronger and lighter.
Also, the wide handle allows for easy cutting.
The grip position is lower than the stock handlebar, so you can maintain a low stance and lower your line of sight, allowing you to corner in the best position.

[Disclaimer] *Depending on the time of arrival, the logo may not be present.

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

■Applicable models KAWASAKI
16097-0008 ULTRA260/250 series (excluding 300/310) /STX-15F/12F(04)/15S

[! ]Please be sure to use 16097-0007 for ULTRA300/310.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

As engine oil becomes dirty and deteriorates due to repeated use over a long period of time,
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

The one-shaft slide lever reduces the frustration of not getting caught, which is common with two-shaft types. The 8” spoke wheels give it a cool look.

■Maximum load: 680kg/1500LBS
■Mounting frame: up to 76.2 x 127mm
■Stroke: Approx. 250mm
■Material: Steel
■Tire: Made of resin

[Staff comment]
The biggest feature of this jack is that it uses a "one shaft slide lever".
Most conventional jacks have two shafts, so they have a large clearance to fit two shafts into the holes at the same time, which tends to cause rattling.
As you use it, the shaft may not engage properly and may become wobbly.
The number of shafts is reduced from two to one, resulting in less rattling and clearance and superior durability.

The casters use spoke wheels and have a high quality and stylish finish.
The caster housing bracket is of the highest quality and durability, avoiding the use of cheap welding and using three-dimensional bending to strengthen its weight resistance.

[Applicable model] YAMAHA Yamaha
VX series (~2014)
VX / 110DX / CRUISER / VXR* / VXS
*For the new VXR, the product number [Y-5S-1: Silver, Y-5B-1: Black] is compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

Y-5S Silver
Y-5B black

[Applicable model] SEA-DOO
SPARK 3-up(2014-17)
SPARK 3-upTRIXX(2018-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-13S Silver
S-13B black

[Applicable model] For KAWASAKI ULTRA series only
ULTRA310X / ULTRA310LX / ULTRA310SE / ULTRA310R
ULTRA300X/ULTRA300LX
ULTRA260X/ULTRA260LX
ULTRA250X
ULTRA LX

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

■With forward rotation lock

■Gear ratio: 3.1:1

■Material: Steel plating

■Maximum towing load: 270kg/ 600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

[Compatible models] SEADOO SPARK

This provides dramatically improved control when cornering and in rough conditions.
It can be installed by bolting onto the original holes.

[Compatible models]
YAMAHA VX110 ('07-'14)

Max Loader Gate from Australian manufacturer WORX.
It is designed to take in water smoothly on rough or calm water surfaces.
Hook-up handling performance and top speed are not lost,
We test our products under the best conditions.

[Compatible models] KAWASAKI Kawasaki
STX15F
STX15S
STX12F
STX-R

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

It is the same shape as the AURHEAD marble series, and can be pulled from either the front or the back, making it twice the fun!
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

[This series is available in 2-seater, 3-seater, and 4-seater versions]

■Size: 220×203×124cm
■Maximum capacity: 2 people ■PVC tube
■Nylon full cover *Body only, pump and rope not included.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

■Size: 24cm(10")

To install, just hang it on the rear seat top.
It's made from chloroprene fabric, which is used in wetsuits, so even if the surface gets wet, water won't seep through to the back. It's safe to have when going outdoors such as marine sports or camping, or when going out with children or pets.
Even if you ride in a wetsuit, the seat will not get wet.
The back side is made of skin material, so it's not only waterproof, but also stays in place even when you get in a car in a hurry.

Also, if you hang it from the trunk space side, it can also be used as a dirt-proof cover for the back space, which is very convenient.
Since it can be rolled up and stored, it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for the trunk room, a flat sheet for outdoor use, and a cold-proof sheet.
It has the best texture and is not too thick.

Not only marine wear, but also sweat and dirt after various field sports, wear and tear caused by pets, etc., are all you need to protect your car seats.

■Surface: Chloroprene ■Back: Slice skin ■Size: W125xH130cm

*Due to the elastic material, there may be an error of ±1 to 2 cm during the manufacturing process.
*The image of all seats is for illustrative purposes only.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
・There may be creases when opening the package, but this is not a product defect.

A cap with a large "LOOK FAST and GO FAST" logo.

■The front panel of the hat features a custom embroidered logo.
The thick embroidery gives it an outstanding sense of luxury. The back style has gold brand embroidery.
■The wide and straight brim type, which is widely popular in street style, is extremely fashionable.
The arched brim blocks more sunlight from hitting your face, but it also reduces your visibility.
The UNLIMITED cap has a wide brim that blocks sunlight while ensuring visibility.
■One size fits all The size can be adjusted with a snapback closure (adjuster) at the rear.
■The inside of the brim is colored red to emphasize the design.

■For everyday wear such as sweatshirts, printed T-shirts and board shorts,
Add a cap for a street look...a popular casual style.

■Can be worn backwards with a collared shirt or polo
The UNLIMITED cap also has a logo on the back style, giving it a shrewd look.

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Compatible models]
Tight Japan MAX trailer: RR single, C-1, A-1, LOPROSS, PROPOSITION

[Kit contents]
Stainless steel U BOLT set Length: 150 x Width: 63 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 10 4 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 12 4 pieces
Stainless steel U BOLT set Length: 70 x Width: 97 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 110 x Width: 63 x Bolt diameter: 10 4 pieces

*If you are installing a wood rail, you will need 4 pieces of 09013-01, and if you are installing a flat rail, you will need 8 pieces of 0903-01.

[U bolt 1 contents]
Two nylon lock nuts and two washers are included with each U-bolt.

[Manufacturer] HONDA
[Car model] S-MX
[Compatible car model] RH1/2
[Year] H8.11-H14.1
[Compatible grades] Compatible with all grades

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] LTDⅡ
[Processing] T-2
[Drilling] 3
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] X-Trail
[Compatible car model] TNT31/NT31
[Year] H19.8-H27.2
[Compatible grade] 25S/25X/20X [Supplement] Unconfirmed: DBA-NT31 (20S), DBA-T31 (20S/20X)

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] LTDⅡ
[Processing] D-1・3/K-1
[Drilling]-
[Wearing time] 3.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

■Material: Steel plating

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

■Details
[Product number: Ball diameter / Housing / Maximum towing weight / Mounting hole spacing]
TC-01: 2 inches / 50.0mm compatible / 1,588kg / approx. 77mm

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

●SOREX tire lock type trailer only

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

●Sold in units of 1 piece.
●Oval type (for disc brakes)

There are two holes for attaching parts for Solex PWC trailers from 2013 onwards, vertically on the reflector.

■For trailer installation. With bolt ■Size: 160mm on one side
■Mounting bolt spacing: 65mm

●SOREX license lamp.

●Quantity: Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.
*Dimensions of part A in the image are 20mm type. (A type with dimension A of 60mm (product number SRX-121-02) is also available.)