Collection: merchandise

●It is a navigation light that must be turned on when the vessel is at anchor. *For ships with a total length of less than 50m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSA-2W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the stern (stern) part of a ship. *For ships with a total length of less than 50m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSS-2W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the bow part of a ship. *For ships with a total length of less than 12m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is an anti-vibration rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSW-2B
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●A navigation light installed on the starboard side of a ship. *For ships with a total length of less than 20m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSG-2G
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●A navigation light installed on the port side of a ship. *For ships with a total length of less than 20m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSG-2R
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the mast of a ship. *For ships with a total length of less than 20m

●This product complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSM-3W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

■Length adjustable from 61 to 91cm

●Supports the outboard motor when towing a trailer, reducing the burden on the transom.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Up to 2 items can be sent together

■Boat Power Holder A clamp for holding fast-acting rods.

■If you set it on another rod in advance, you can easily change the rod and it is very convenient.

■Long arm, sturdy system, and the pinnacle of high-performance rod holders.

■If you set the quick clamp on another rod in advance, it is very convenient as you can easily change the rod.

■Long arm, sturdy system, and the pinnacle of high-performance rod holders.

■If you set the quick clamp on another rod in advance, it is very convenient as you can easily change the rod.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

A concentrated detergent that cleans stubborn oil stains in a short time.
●Liquid: alkaline,
●Ingredients: Nonionic surfactant

[Application] For FRP & stubborn oil stains

[Contents] 750ml
【how to use】
1. Spray directly onto the surface you want to clean, leave it for a few seconds, then wipe it off with a damp sponge or cloth.
2. After use, immediately rinse with water or wipe thoroughly with water.
*If the dirt is not too bad, dilute it 10 times with water.
*Estimated usage amount: Approximately 5 sprays per 1 square meter

【please note】
Cannot be used on transparent plastics in general, polycarbonate, and items that can be soaked with water.

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 210 x stop hole ~ stop hole 53 x height 40mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

This item is currently not scheduled to be restocked.

[Contents] 3780ml
[Application] For removing oxidation, fine scratches, rust, etc. on gel coat surfaces.

A paste-like compound that removes oxidation, small scratches, rust, exhaust dirt, etc. that appear on the surface of gel coat.
Recommended for preparing the groundwork at a relatively early stage.
High machinability allows for efficient work.

■A bolt-on type power holder that is even easier to handle with a small, lightweight, and compact clamp head.

■It is a bolt-on type equipped with the new CH50G in the clamp part.

■Comes with 4 sizes of clamp head (SS, S, M, L).

■A bright red color that looks great on the boat.

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.

●When used as a single piece, it is compatible with items weighing up to 100 kg.
*It can be easily separated into small pieces with scissors, etc., and if all of them are attached to the bottom of the device, the same load capacity can be obtained.

●Size: width 100x width 100x thickness 5mm
●Contents: 1 piece
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.

●When using 6 sheets, it is compatible with objects weighing up to 75 kg.

●Size: width 30x width 40x thickness 5mm
●Contents: 6 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.

●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use this product to prevent large furniture such as TVs, computers, and refrigerators from falling over, as well as small items such as vases and works of art.

●When using 4 pieces, it is the perfect size for securing electrical appliances and accessories such as microwave ovens and rice cookers.
●Suitable for items weighing up to 40kg. (When using 4 sheets)

●Size: 30×30mm
●Contents: 4 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

When installed, the top surface becomes horizontal, so this handle can also be used as a step.
Made of 316 stainless steel material, which is highly durable and resistant to corrosion.
Fix it to the transom etc. with screws etc.

[Product specifications]
■Material: Stainless steel (SUS 316)
-Size: Width 170 x Height 30 x Depth 50mm

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

By replacing the hose,
An air pump with excellent cost performance that can be used for both intake and exhaust.
When using on towing tubes, please use a foot pump or hand pump for finishing.
★3 types of adapters are standard equipment

■Voltage/Current 12V/11.8Amp
■Cigarette lighter plug specifications
■Continuous use time approximately 13 minutes
■Air flow rate 290L/min
■Pressure: 0.7psi
■Accessories: 3 types of adapters

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

You can obtain the same strength as simple processing without the troublesome braiding of the end of the rope.
Made of 316 stainless steel material that is resistant to corrosion.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Please refer to the image for size details.

●Suitable for both spinning and casting reels.
●A rod holder that allows you to set the top and bottom angles in one shot using the side lever.
●The main body and pedestal can be attached and detached with one touch.
●The mounting mount has two outlets at 90 degree angles, so one mount can be mounted on either horizontal or vertical surfaces.

[Product specifications]
■Material: Made of resin
■Holder part: Inner diameter 34mm x total length approx. 210mm
■Pedestal: 64mm x 115mm

[Contents] 473ml

●The concentrate of this product contains 100% of the world's purest oils, including tung oil, which restores and protects the surface of teak to its natural finish color. It penetrates deeply and surrounds the wood fibers, preventing moisture and other components from entering that would damage the wood of teak.

■It is a rail attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Used when installing a boat power holder on a 19-32Ф rail.

■Boat base attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Dimensions: 60 x 101 x thickness 22mm

■Material: SUS316

*Mounting bolts are not included

●JCI certified product ●Type approved product

●Assembly type, hanging type

●This is a radar reflector that complies with the new standards that came into effect on October 1, 2010.

[Product specifications]
■Material: High-density polyethylene + heat-welded salt damage protection aluminum foil

■Size:
Circular: 245mm
Total length: 370mm
Weight: approx. 300g

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 25Ф pipe

●Made of stainless steel

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 1" x 14 screw threads

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 25Ф pipe

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 1" x 14 screw threads

●Made of stainless steel

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●Can be installed on either flat or side surfaces.

●For 1" x 14 screw threads

●Made of stainless steel

●A very convenient fixture that allows you to easily secure the rope with one hand.

●You can easily fix the rope by simply passing the rope through it alternately without tying it.

●It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

●Once fixed, the rope will not come off even if strong tension is applied.

●When removing it, you can easily remove it by removing the ropes passed through it alternately.

●Can be used with ropes up to 12mm in diameter.

●Body dimensions: 82mmx40mm
●Made of stainless steel

■Can be installed on rails from 19 to 32Ф, and the angle can be adjusted with one touch.

■Made of stainless steel

■Cap (rubber) inner diameter: 40.4Ф・Length: 250mm

■Can be installed on rails from 19 to 32Ф.

■Made of stainless steel

■Cap (rubber) inner diameter: 40.4Ф・Length: 250mm

■A best-selling, sturdy and easy-to-use rod holder that can also be used for outrigger fishing.

■It can be easily installed on the deck with 4 screws, so there is no need to worry about water getting into the boat.

■The angle and direction can be adjusted with the knob.

■Made of stainless steel

■Mounting base: 70×120mm・Pipe inner diameter: 40.4φ

[Product size]
■Total length (A): 159.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 127.0mm
*Accessories: End cap

● Gently secure the handle and tip of the rod with foam.

●The soft foam protects the rod from vibrations from the boat and prevents damage to the rod.

●Fix using the hole on the side of the plastic frame.

●Length 345x Height 65x Depth 33mm Can fix rods up to 37mm in thickness.

●Set of 1 each of fixed holder and fall-prevention rotating holder

[Product specifications]
■Size: Length 860 x Width 270mm
■Dial diameter: 350mm
■Terminal installation inner diameter: 19mm

■Applicable: For small batteries
■Can be used up to 800 amperes.

This is an ON/OFF switch attached to the battery terminal (negative side).
You can turn the power on/off by tightening or loosening the green knob that comes with the terminal.