Collection: merchandise

A bank pad is attached to the wood rail.

■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1430mm
■Two bank mounting angles included

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

■1 set of 2 pieces
■Made of steel
■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

This is an essential item for engine setting.
Simply bring it close to the plug cord and the rotational speed will be displayed at 0.5 second intervals.

【Product details】
■Compatible with: 2 stroke 1/2 cylinder, 4 stroke 2/4 cylinder
*Cannot be used with direct ignition type engines.
■Dimensions: L44 x W61 x H12mm
■Body weight: 31g
...
■Accessories: Antenna lead wire, Velcro (for installation)
■Daily waterproof specifications
...
■Measurement method: Pulse count method
■Rotation speed display interval: 0.5 seconds
■Accuracy: ±10rpm (4-stroke 1 cylinder ±20rpm)
■Battery life: Approximately 20,000 hours

This is a failure determination device for gasoline engine ignition system.
You can check the ignition spark by simply connecting the included cord and starting the engine.

This is an essential item for engine setting.
Simply bring it close to the plug cord and the rotational speed will be displayed at 0.5 second intervals.

【Product details】
■Support: 2 stroke 1 to 4 cylinders, 4 stroke 1 to 6, 8 cylinders
*Cannot be used with direct ignition type engines.
■Dimensions: L44 x W61 x H12mm
■Body weight: 31g
...
■Accessories: Antenna lead wire, Velcro (for installation)
■Daily waterproof specifications
...
■Measurement method: Pulse count method
■Rotation speed display interval: 0.5 seconds
■Accuracy: ±10rpm (4-stroke 1 cylinder ±20rpm)
■Battery life: Approximately 20,000 hours

■Material: Stainless steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[The photo shows stainless steel]

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

Minus bar

Size: 50 x 50 x 1300 (mm)

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

The height and front and rear positions of the rollers can be adjusted to suit the hull.
Compatible with single boats of each manufacturer.
It is designed to be fixed by co-tightening with the rail and to have the optimal rail width for single boats.

■Size: 80x25mm (diameter x thickness)
■Set of 2

■An essential item when mooring your boat! A retractable boat hook that can be fixed in any position.

■Adjusting the length of the handle is very easy, just twist the aluminum pipe part to the desired length, and then twist it the other way.

■Material: Aluminum (body), plastic rubber (handle tip)

■Specifications: 2-stage expansion and contraction

■Stretch width: 124-217cm

■Pipe diameter: 29mm

●Draining water from boats without power sources, such as canoes and rubber boats,
It can also be used to drain water from pools and cages.

●A cordless pump that can be used with seawater or fresh water and uses batteries.

●Since it uses batteries (3 AA batteries), no wiring is required.

●Maximum discharge rate 12.6L/min
●Pumping height: 100cm
● Can be used continuously for about 5 hours (when using alkaline batteries)
●Dimensions: Height approx. 16.2x Diameter approx. 13.3cm
●Weight: Approximately 900g
●Hose length: 1m

This is a great value kit that can repair FRP and includes the necessary amount.

[Kit contents]
■Resin: 2kg (with paraffin)
■Hardening agent: 50cc
■Polyester putty: 200g
■Glass mat: 2m x 1m
■Wool roller: 75mm x 1
■ Spatula tree: 1 piece
■Cleaning acetone: 1L
■Polypoid: for 10cc

X-ALL Grease

● Contents: 220g

[Product specifications]
■Material: Stainless steel SUS
■ Breaking strength: 800kg

●A safety hook that is resistant to rust and corrosion.
●The hook has a spring mechanism.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 15000kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 10300kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

[Product specifications]
■Material: Stainless steel (SUS 304)
■ Breaking strength: 5500kg

●This is the most commonly used round shackle (threaded shackle) made of stainless steel 304 that is resistant to rust and corrosion.

●Drilling size: 24φmm
●Flange size: 51×34mm
●Screw screw hole: φ6mm
- Distance between screw centers: approx. 38mm

*Main body only, mounting screws etc. are not included.

■Length: 1,170mm (excluding hook)
■Hook: 110mm

●This is a special bag to store when the ball mount is removed.
●Does not make the interior of the car dirty, and you do not have to worry about where to put it.
●Cushion material is sandwiched between the fabrics.

[Disclaimer]
*The ball mount and hitch ball in the image are not included.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Since it uses an L-shaped cylinder, it is easy to attach and detach at the center of the hitch member, which tends to be narrow.

■Pin diameter: 16mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Yamaha outboard motors 1/4”NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Compatibility: 3/8” hose 8894-7 for Yamaha outboard motors

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with YAMAHA outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use the product. For fitting compatibility, please check the diameter shape before making your selection.

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

Helps prevent the trailer coupler from falling off.

■Material: Steel
■Pin diameter: mm
■Size: 50x65x65mm (length x width x pin length)

[Ordered products]

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 50mm compatible
■Maximum towing weight: Class 2, 1570kg
■Material: Steel Viper color