Collection: merchandise

FACTORY ZERO Factory Zero Jet Launcher
[Compatible products] J-130S / J-130SX
(1300X for two wheels is a separate product "Product number: JL101X")

Factoryzero Jet Launcher Repair Parts

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
JET RENU's DRI WASH is a hull cleaner that does not require water.
By lifting pollutants with strong foaming action,
Quickly and effectively remove dirt and grime from all surfaces.
It not only cleans most surfaces without using water, but also leaves behind a protective coating and a brilliant shine. Environmentally friendly and easy to use spray type, just buff with a soft cloth.

[Contents] 354ml
【how to use】
When sprayed onto a surface, the product foams and lifts dirt.
Wipe the surface with a soft cloth.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! A cleaning item series born in California.
Different colors have different uses, making daily cleaning fun.

This product "CLEAR" is a glass cleaner. It is effective against oil stains and can easily and evenly wipe off dull stains such as hand marks on glass surfaces. It can also be effectively used on plastics, enamel, etc.

[Contents] 473ml
[How to use] Spray on the area you want to clean and wipe with a soft cloth such as microfiber.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it gets on your skin, wash it off.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! This is a cleaning item made specifically for jet skis and boats that was born in California. Different colors have different uses to keep the hull beautiful.

Yellow is an oil cleaner that is ideal for areas with heavy oil stains.
Made with a special surfactant and alkaline builder that does not harm engine metal parts, it can easily and quickly clean oil and grease from solvent tanks, etc.
Also available for wheels, rims, and inboard/outboard motors.

[Contents] 473ml
[How to use] Spray directly on the area you want to clean and leave for 60 seconds.
Then wash it off with a high-pressure washer.
If a high-pressure washer is not available, use a soft brush, etc. to scrub and rinse.
*Do not use on aluminum parts or anodized parts. It will damage the paint.
*Do not leave it on the surface or allow it to dry. It will damage the paint.
*Be sure to test it in an inconspicuous place before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

KAWASAKI
750SX
800SX-R
800X-2

●Lightweight flywheel weighing 800g.
●The response of engine revving and rotation return is improved, so acceleration from 0 to 1m is significantly improved, making it a must-have item at the start of a racing scene.
●Improved from previous products to increase durability.
●Compatible with CDI-10R/CDI-R power unit, and when installed at the same time, the pickup will be improved and the response will be linear with throttle work. The strength of the gear has also been increased.
●Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.

[Compatible models] KAWASAKI STX-R / Ultra150
[Specifications] Compatible with regular gasoline

This is a purely domestic CDI unit, and we have researched the engine characteristics of STX-R/Ultra150 to achieve the best ignition characteristics.
Easy to install and shortens the time to reach top speed from low speed.

[About installation]
Bolt on.
*Please set according to the engine specifications and driving conditions.

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*This product only comes with a nylon cap.
*Please refer to the image for size. (Please use this as a guide as there are individual differences)

●Sold in units of one.

・Black reinforced wheels are cool!
・Beach Tote tires with nylon bearings.
-Can also be used with Factory Zero's jet launcher and jet bank.

[Product specifications]------------------------------------------------- --
●Air pressure: 0.8~1.0kg
●Tire width: 10 inches
●Shaft diameter: 25.4Ф
●Offset amount: 0mm
●Weight: 5.7kg
●Tire size: 18×9.50-8

[Product contents]------------------------------------------------- ---
・Tubeless air tire x 1,
・Black color plastic rim x 1,
・Nylon bearing x 2,
・Nylon cap x 2

[Product information]----------------------------------------
●Cannot be bundled...To prevent scratches and damage, "combined packaging" (combined packaging) with other products is not possible.
●When purchasing multiple items...2 items will be sold in small quantities, and small shipping charges will be applied depending on the number of items purchased.
*Example: For 1 piece...Shipping fee x 1 piece, for 3 pieces...x2 pieces, for 5 pieces...x3 pieces*

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

Due to the durable sling belt type belt with a long plate and a width of 50 mm,
Runabout boats can also be lifted stably.

The plates are poly-coated to prevent scratches on the boat.

[Product specifications]
■Plate (length x width): 830 x 50mm
■Plate part: Aluminum poly coating processing
■Maximum load: 500kg
■With anti-slip pad

●Towing speed: 5km/h or less (suitable for towing buggies, etc.)
●Attachments: Bolts and special spacers

【please note】
Powered towing using this coupler is not a trailer, so it cannot be towed on public roads.
Towing speed: Please strictly observe the use at 5km/h or less. (Cannot be used on uneven roads even if it is less than the value on the left)
When bouncing, the instantaneous load is 2 to 3 times the weight, which can damage parts such as the axle shaft.

We also have the "JB104SUS reinforced axle shaft kit" for heavy boats.
If you are towing with power, we recommend replacing it.

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

[Quantity] 2 pieces
This is a pin blind seal.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

[Compatible models]
KAWASAKI 750(B)/800

An indispensable item for crank maintenance and racing scenes.

Made using the same material as the normal one and made it even stronger.
The balance of the crank is the best.
■Made in Japan

*With big end bearing and small end bearing sold separately.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Compatible models] YAMAHA 700 / 760 “M8 Bolt” only

●This gasket is more economical than the genuine product and has better vibration absorption and tighter sealing than the genuine product.
●Improves cooling efficiency with a shape that increases the flow rate compared to normal water flow.
●Top grade gasket made in Japan

[Note] Not compatible with M10 bolts.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

●This is a replacement terminal.

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

The small body makes it convenient for use in narrow spaces.

[Material]
■Body part: Zinc
■Bolt part: Steel
[Size] Approx. 55 x 40 x 13 (mm) ■Clamp size: 20 (φmm)
[Contents] 1 pair (2 pieces)

[Application] Used to stop hose lines.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.