Collection: All items

This is a made-to-order product.

● One left and right set
● By reducing shocks and vibrations, it improves the running stability of the trailer and reduces impact on the cargo.

--- [Request when ordering] --------------------------------------- ----------
The following information is required for product arrangement.
Please fill in the following information in the request/remarks column when ordering.
● Trailer model name
● Trailer model year
● Stamped number (The number stamped on the front of the trailer.)
Example: For SOREX, notation like [Okayama] - [Okayama]
* As this is a made-to-order product, cancellations and changes will not be accepted after order confirmation (scheduled guidance).
Please note that returns will not be accepted.

*May not be installable depending on the vehicle model.

This is a set of 12-inch brackets, tires, and wheels.

【Requests and Notes for Ordering】
*Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
●Mounting position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●Chassis number
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests for Ordering."

・Foldable double casters

Keeps the trailer level when parked, and is convenient for driving and moving the trailer. The double tires also provide stability.

●Foldable.

■Wheel size: 6 inches (15.2cm)
■Maximum load capacity: 453kg
Keeps the trailer level when parked, and is convenient for driving and moving the trailer.

●SOLAS stainless steel wear ring 155mm (SR)
●Higher strength and durability than normal wear rings.

●Series: CONCORD
●Pitch size: 13/21
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/20
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/18
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016) stock engine (normal boat)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

[Compatible models]
YAMAHA
YS-CD
YS-TP

■Material: Aluminum

[Adaptation]
YAMAHA
For YS-DF
For YV-CD

■Material: Aluminum

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Reason for outlet]
Special price for stock replacement.
★There is rust on the included impeller wrench (see image)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Applicable model] YAMAHA 700XL (99-04 model) for stock engine

■Accessories: Impeller wrench only (shaft holder not included)

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Drain Plug

●OEM Part Number: 292002022

●This is an aftermarket replacement part that offers performance equivalent to OEM parts at a lower cost.

Equivalent to genuine part (OEM part number: #293200087)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

[Applicable] For SEA-DOO pump diameter 159mm pump (for 260/255/215 horsepower)

BRP OEM part number: 267000372

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

[Compatible models] SEA-DOO
4-stroke / 2-stroke (580 650 720 800 951 engine)

●Genuine part number (OEM): 278003012 etc.

●SGS starter relay
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4 stroke
●Genuine parts (OEM: 420256919

●SGS Oil Pressure Switch ●This is an inexpensive aftermarket repair part with performance equivalent to the genuine part.

SEA-DOO 2018 and later models, 300 and SPARK
(OEM part number: 420666142)

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 / 1630ACE engines
●Genuine Part Number (OEM): 420931130

●SGS Aftermarket PTO Gasket
●An inexpensive aftermarket replacement part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engine
●Genuine product number (OEM): 420950771

●SGS cylinder head gasket
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engine
●Genuine part number (OEM): 420892735

●SGS piston ASSY (piston & piston ring)
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

【Made-to-order product】Please note that it may take approximately one month to deliver the product after your order.
※Cancellations are not accepted after an order has been placed for made-to-order items. Thank you for your understanding.

【Compatible models】KAWASAKI
STX160LX / STX160X / STX15F / STX12F

Billet Sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

【Made-to-order product】Please note that it may take approximately one month from the time of order.
※Cancellations are not possible after ordering made-to-order items. Thank you for your understanding.

【Compatible models】SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

[Made-to-order product] Please note that it may take about one month from the time of order.
※Cancellations are not possible after ordering due to this being a made-to-order product. Thank you for your understanding.

[Applicable models] KAWASAKI SX-R 1500 4-stroke

Billet Sponson Type 2

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order product] Please note that it may take approximately one month from the time of order.
*Orders cannot be canceled as they are made-to-order. Thank you for your understanding.

[Compatible models] SEADOO SPARK
[Color] Silver (*Photo shows pink; actual product will have the pink part in silver)

Billet Sponsons
Strong and cool finish with a machined aluminum base

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

Exhaust nozzle for SE ULTRA310/300/260/250
This part adds a stylish touch to your exhaust outlet.

Exhaust nozzle for SE ULTRA310/300/260/250
This part is designed to give your exhaust outlet a stylish look.

Exhaust nozzle for SE 800SX-R / 800X-2
A part to style the exhaust port.