Collection: merchandise

[Compatible models] KAWASAKI
ULTRA
260X/260LX
250X
LX

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] KAWASAKI Kawasaki
800SX-R
800X-2

■2 wing specification.

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models]
YAMAHA FX160 / 140 / HO(-'07)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Model compatible] YAMAHA Yamaha
SJ (96-07) Freestyle

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Adaptation]
YAMAHA SVHO/SHO (for YS/YV)

SOLAS impeller drive shaft holder

[Compatibility]
For YAMAHA YS/YV A stamping

Impeller live shaft holder for SOLAS

[Compatible models]
YAMAHA Yamaha FR-FZS/SHO
Drive shaft holder for SOLAS impeller YS

【Compatible models】

■Impeller wrench for SEA-DOO SOLAS SRZ-TP twin impeller

[Application] A special tool required for attaching and detaching SOLAS Twin Impeller SRZ-TP.

【Compatible models】

■SEA-DOO Impeller wrench for SOLAS SRX/SRZ

[Application] A special tool required for installing and removing the impeller.

【Compatible models】
SEA-DOO for Sea-Doo SOLAS SR/SRB

impeller wrench

[Application] A special tool required for installing and removing the impeller.

[Compatible models] YAMAHA
800GPR / 1200GPR / 1300GPR / 800XL / 1200XLT / 1200XL-L

■SOLAS Impeller YF/YG/YQ/YD (Concorde)
■155XL pump, drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 800/1200/1300GPR/1200XLT/1200XL-L/FX140/160

SOLAS impeller YF / YG / YQ YD (Concorde) compatible
Drive shaft 20mm

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

You can play in various positions such as standing, lying down, kneeling, sitting, and lying down.
Riding while standing up gives you the feeling of being at the controls yourself.

■Size: 200x188x135cm
■Maximum capacity: 3 people
■1 towing point
■PVC tube
■Nylon full cover
*Main unit only, pump and rope not included.

The angled tip allows for smooth towing with less resistance when starting.
The backrest also prevents skidding.

■Size: 190×160×62cm
■Maximum capacity: 2 people
■2 towing points
■PVC tube
■Nylon full cover
■Easy-toe connector included (not removable)

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies! ]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!

Size: 50x45x25cm
Fabric: Clear PVC black mesh

With two separate cockpit seats, you can enjoy sitting or kneeling.

■Size: 132 x 198 x 38cm
■Maximum capacity: 2 people ■PVC tube ■Nylon full cover type ■Easy-toe connector included (not removable)

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

This is a repair kit for PVC towing tubes and banana boats.

■Set contents: PVC (30G) fabric 20 x 20 cm and PVC adhesive

<Paste procedure>
1. Remove any dirt from the area to be repaired.
2. Cut the sticker into a circle larger than the scratch.
(※Cutting it into a square makes it easier to peel off)
3. Place the sticker over the area to be repaired and mark the size of the sticker with a permanent marker.
4. Apply adhesive to the main body.
5. Once the surface has dried slightly, attach the sticker.
6. Finally, tap the area to be pasted with your hand to remove any air bubbles and ensure it is firmly attached.

[Caution] Not suitable for repairing fabric joints or crimped sections.
In addition, the packaging may change depending on the lot of the product.

Standard deck type tube.
Although the tube has a simple design, towing it close to the water's surface provides a top-class thrill.

[Front towing specification]
■Size: 187.5×155cm
■Maximum capacity: 3 people ■Nylon full cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

●Higher backrest prevents falling into the water.
●The handle position has been changed to make it easier to grip.
●Additionally, a new boarding handle has been installed to allow for safe riding.

Same shape as AIRHEAD's marble series.
You can pull it from either the front or the back for double the fun.
Also, the backrest makes it easy for women and children with limited physical strength to maintain their body shape.

■Size: 167×152×101cm
■Maximum capacity: 2 people ■PVC tube
■Nylon full cover *Body only, pump and rope not included.

A new type of toy that uses elastic fabric "Flex Foam Sheet" for the seat part.
Of course, you can lie down like a deck-type tube,
You can enjoy it while kneeling or sitting on the seat, and everyone from adults to children can enjoy riding it in a way that suits them.

[This series has 2-seater and 3-seater versions. ]

■Size: 183×152cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover type

*Main unit only, pump and rope not included.

[120] (Yupack)

The basic shape is the same as the Bubba series, but
Bingo has a low backrest, which reduces the amount of air being poured in and out.
It can be said to be a series that conserves physical strength because it has a backrest and your buttocks can fit comfortably inside.
Towing is possible at two locations, front and rear.
[This series has a lineup of 2-seater, 3-seater, and 4-seater models. ]

■Size: 175×172cm
■Maximum capacity: 2 people
■PVC tube
■Nylon full cover
■Easy toe connector included

*Main unit only, pump and rope not included.

[140] (Yupack)

By widening the width of the side tube, stability during towing is achieved,
Boarding from the water is also easy. It also has excellent stability when riding straight.
Above all, it is a model design that is best suited for children.

■Size: 307 x 157 x 55cm
■Maximum capacity: 3 people ■PVC tube ■Nylon full cover ■Easy-toe connector included (cannot be removed)
*Pump and rope are not included.

Flex wing allows for flexible tube control.
For those who are tired of being pulled around!
You can perform jumps, slalom, barrel rolls, etc. by changing your center of gravity by changing your weight or sitting position.
Please try out various ways to find a way to play that suits you.
The amount of air is small, making injection a little easier.

■Size: 188×178cm
■Maximum capacity: 4 people ■PVC tube
■Nylon full cover ■Easy toe connector included (not removable)

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

Inflatable model that fills with air

●Stable buoyancy allows up to 6 people to ride.
●Water walkways can be connected to each other using the zipper on the side.
●Can also be connected with the separately sold slider [Product number W19-2210].
●Recommended for use as a passageway between moored boats or as a pontoon.

■Product size: 183 x 305cm
■Maximum capacity: 6 people
■PVC specifications
*This product cannot be towed.

With safety nut washer

■Size (A×B×C): 90×88×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 70×63×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.