Collection: merchandise

The body is made of wet material that emphasizes comfort, and the neck, hand, and foot shields are made of neoprene that feels less constricting, so you don't have the hassle of traditional dry suits.
Winter wear suitable for runabout models.

Normally wetsuits are fully custom made and fit tightly to the body.
3-5mm neoprene fabric is used to increase cold protection,
Wet Dry has improved cold protection and a loose fit all over the body, keeping the same style as Fabric Dry.
Of course, it can also be adjusted with inner wear, and the synergistic effect with the heat retention of neoprene itself provides both cold protection and mobility.
There is no need to worry about the deterioration of the latex rubber seal, which was a weak point with fabric dry, with the wet dry neoprene waterproof seal. (See notes)

■Applicable height
S size 150-160cm
M size 160-170cm
L size 175-180cm
XL size 180-185cm

■MATERIAL: Chloroprene [Please note that due to the nature of the product, we cannot accept returns or exchanges. ]

"Create a beautiful body line"
This wetsuit for women features an elegant lace pattern.
The cute design goes well with swimsuits.

[Two-piece suit consisting of a wetsuit jacket and long pants]
The three-dimensional act structure and loose silhouette allow for aggressive movements and minimize strain even when worn for long periods of time.
It is sewn with flat seams so that the seams are not noticeable, and the material is Super Light Foam, which is lightweight and highly elastic.
The ankles come standard with zippers for easy on and off.
The waist part can be folded over for a low rise look, making it a two-way design.

The sides of the jacket are made of airplane material, which is highly breathable and water-repellent.
■MATERIAL 2mm neoprene ■Suitable size
MB: Height 158-162cm Chest 82-86cm Waist 64-68cm Hips 91-95cm
LB: Height 162-166cm Chest 84-88cm Waist 66-70cm Hips 93-97cm

Personal Watercraft (PWC) Jet Ski, SUP
Jet ski, Marine jet, Surfing, Marine sports, Snorkeling

These women's long pants feature an accent design at the waist. They are made of UV protection rash guard material, so they are lightweight and feel good against the skin even when wet.

■Material: 93% polyester, 7% polyurethane, UV (ultraviolet ray prevention) protection material ■Size (waist/hip/inseam) cm
S: 61/90/68cm
M: 66/95/72cm
L: 70/99/76cm

*Please note that there may be some errors in the measurements as they were taken by staff laying the item flat.

[Reason for outlet sale]
Brand new, unused item. May have dirt from storage (returns and exchanges not accepted)

This is a multi-purpose marine jacket that can be used both on the water and on the slopes.
It has a tighter style than the tour coat.
When coordinated with long pants, it can be used as a loose-fitting suit.

Since it is made from wetsuit material, it is of course easy to care for.
It is perfect for marine sports as well as outdoor activities.

■The model in the photo (height 182cm) is wearing a size L

■ Suitable height
M: -170cm
L: -180cm
XL: -185cm

■ Flat chest size M: approx. 108cm
L: Approx. 112cm
XL: Approx. 120cm

■MATERIAL 1.5mm chloroprene

This is a full-suit type dry suit that is waterproof and heat-retaining.
The body is made of wet material that emphasizes comfort, and the neck, hand, and foot shields are made of neoprene that feels less constricting, so you don't have the hassle of traditional dry suits.

■Specifications Front entry zipper Wide opening from arms to chest for easy on and off! The back is stress-free and easy to move.

YKK Aqua Seal Zipper The new simple waterproof zipper uses a zipper that is lighter and more flexible than conventional zippers.It has excellent flexibility and operability, making it easy to put on and take off the dry suit, and the slider movement is light.

Wristband (wrist can be adjusted with the included wristband)

Chloroprene seal (reinforced with Melco tape, so it can be cut to size)

■Applicable height: M size 160-170cm
ML size 170-175cm
L size 175-180cm
XL size 180-185cm

■Color: Black ■Material: 3mm Chloroprene, Chloroprene Seal, YKK Aqua Seal ■Specifications: Front entry zipper

Please note that due to the nature of the product, we cannot accept returns or exchanges.

■Back zipper and ankle seal specifications

Adopts a material that combines excellent waterproof and windproof properties with smooth moisture permeability. The surface of the fabric prevents water from entering, and also allows moisture from perspiration to escape, improving comfort.
This dry suit is not only lightweight but also uses the best know-how and materials.

1.The latex on the neck and wrists is adjustable and fits tightly to prevent water from entering.
2. Suspenders: Prevents the inseam from getting too tight, so you don't have to worry about your lower body shifting during intense movements.
3. Comes with a convenient storage bag that is compact and easy to carry.

■Applicable height S size: Height 150-160cm
M size: Height 160-170cm
L size: Height 170-180cm
XL size: height 175-185cm

■MATERIAL/Nylon Ox Dinner Dry Rider Super Latex

[Notes on Dry Sweets]
The material itself does not retain heat, so the innerwear needs to be adjusted according to the outside and water temperatures.
If you don't need heat retention, we recommend wearing absorbent innerwear to prevent sweat.
Also, please cut the latex for the neck, wrist, and ankle parts according to your body shape.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

This is an essential item for sunburn prevention that thoroughly protects children's skin, which has less melanin pigment than adults and is therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.
It's sure to be a big hit at the beach, the pool, or playing in the river.

For customers who will be using it for marine sports, we recommend a fitted size, just like swimsuits.

[Applicable size]
100: 90-110cm
120: 110-130cm
140: 130-150cm
150: 140-160cm

[Actual measurements when laid flat/Chest circumference, Hem circumference, Total length]
120cm/58cm, 54cm, 45cm
140cm/66cm, 62cm, 49cm
*Please note that these measurements were taken by our staff while the item was laid flat, so there may be some margin of error.

*Returns and exchanges are not accepted for special price items.

This is the Moby's brand's top-of-the-line model, fully equipped with features such as a front zipper that allows you to put it on and take it off by yourself, an integrated sock design that is a great ally in keeping you warm, and a small zipper for men's genitals.

■ Color: Black/Gray

■ Suitable height: M (165-168cm) L (170-175cm) XL (175-180cm)

■Material: High-performance breathable waterproof material "VAPOR PRO" & abrasion-resistant material "600D"

■Features
TIZIP waterproof zipper with waterproof seal
CR neck and wrist stickers,
2 pockets TPR patch Adjustable cuffs Dynamic panel design

■Specifications
Neck: Chloroprene Wrist: Chloroprene Socks: Latex

Features
1. Chest zipper for easy on and off by yourself
2. The fabric is made of breathable and waterproof material, VAPOR PRO.
3. Waterproof sealing keeps it from getting wet
4. "ACT" motion pattern technology makes it easy to move
5. The knees are made of urethane knee pads, and the hips are made of wear-resistant material.
6. Pockets on sleeves and chest (pockets are not waterproof)
7. Small zipper for easy access to men's restroom

[Notes on dry suits]
The material itself does not have any heat retention properties, so you will need to adjust your innerwear according to the outside air and water temperature.
If you don't need warmth, we recommend wearing a water-absorbent inner layer to protect against sweat. The nylon lining is specially coated, so if the inner fabric is scratched by hard fabrics like denim or metal fittings like key chains, the waterproofing may be reduced, so please be careful when putting on the inner layer. Also, since the material is nylon, it is vulnerable to heat, so please avoid bonfires, etc.

Please note that due to the nature of the product, we cannot accept returns or exchanges.

This is a life jacket made of wetsuit material that is popular for its soft and comfortable feel, as well as its luxurious feel and fit that nylon types do not have.
This skull USCG vest is lightweight, durable, and has a popular Mobies design.
The surface is made of lightweight cardboard knit material, and the buoyancy body is made of PVC foam that has sufficient buoyancy to prevent it from fading.It is an open type with 2 buckles and a front zipper.

■MATERIAL: Polyester lining ■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)

■Chest size adaptation size
S: 84-95cm
M: 94-100cm
L: 100-106cm
XL: 106-112cm

It is a front open type with 3 buckles, and the shoulder and side panels are made of skin-friendly neoprene, making it easy to put on and take off and provides an excellent fit.
It is also easy to fine-tune the size with the buckle.

The women's model has a shorter length than the men's model, so the hem will not get in the way even when you straddle the seat.

■MATERIAL Nylon + Neoprene + PVC foam ■US Coast Guard certified product (JCI legal equipment compatible)
■Equipped with lifesaving whistle ■Inside pocket included

■Applicable size chest measurement
S(75-85)cm
M(85-95)cm

●Model height: 170cm (photographed wearing size M)

This is a marine coat with special specifications typical of Moby's.
A warm and convenient 1.5mm thick neo jacket that can be used both on the water and on land.
The slit on the back allows for more movement and riding.
The loose fit allows it to be worn over a life vest.
There is a loop on the inside of the left pocket and on the collar for passing the earphone cord through.

■Material: 1.5mm neoprene double jersey
■Specifications: Front double slider zipper, side pocket with zipper, wrist flap, hood with cord

■Actual finished size (chest measurement/length/sleeve length) *Actual size of the product when laid flat
S: 102cm/81cm/83cm
M: 112cm/84cm/86cm
L: 122cm/87cm/89cm

The finger joint motion pattern technology "ACT" enables stress-free fingerwork.
The ultra-lightweight stretch neoprene on the back of the hand is highly windproof, waterproof, and can handle sudden changes in conditions, while also providing excellent safety.
Protection parts on the fingers and instep absorb shock.
The Aggro Glove is a product that MOBBY'S is proud of, as it combines the ideal protection functions that racers desire with the freedom to use the throttle.

■Features: TPR patch, movable protection panel, removable wrist■MATERIAL: 1mm neoprene + LYCRA + synthetic leather

■ Applicable size chart (hand width/total length/middle finger length)
S 22.0cm / 22.0cm / 8.5cm
M 22.5cm/22.5cm/8.5cm
L 23.0cm / 23.5cm / 9.0cm
XL 23.5cm / 24.0cm / 9.0cm

Personal Watercraft (PWC) Jet Skis Kawasaki YAMAHA SEADOO

This jacket coat is useful as an outerwear for outdoor activities such as marine leisure.
This coat made of neoprene material is useful regardless of the season, and once you use it, you won't be able to part with it.
The main material is neoprene, and the elbows and sides are made of luxurious soft skin.
The top-quality soft material is comfortable to wear, with a length that allows for easy movement and a thickness that won't be stiff.
This marine wear is made with attention to detail, such as discreet pockets on both sides and hidden mesh processing on the back for breathability.

[Material] Neoprene 2.5mm (Rubber skin on sleeves and sides is 2mm)

[Applicable height size]
S: 160-165cm
M: 165-170cm
L: 170-175cm
XL: 175-180cm
XXL: 180-185cm

[Actual size when laid flat] Chest measurement/length
S: 100cm/68cm
M: 106cm/69cm
L: 112cm/70cm
XL: 120cm/72cm
XXL: 128cm/75cm

Please forgive any errors as the measurements are taken by our staff.

This wet jacket for children is made of 1mm wetsuit fabric with good elasticity and less pressure.
It provides warmth, prevents sunburn, and protects children's delicate skin from scratches.

Even children who grow up quickly can wear separates even if the length is a little short.
It is also ideal for preventing injuries below the knees when playing on the rocky shore.

If you set it with the long pants sold in the series, you can protect yourself from the cold and expand your range of play.

■Material: 1mm chloroprene

■Product measurements (flat)
[Size] Length/Width/Sleeve length [130] 51 /33 /50
[140]55 /34 /55
[150]59 /36 /56
・Please forgive any errors due to measurements made by our staff.
・Please use this as a guide only.

Wet long pants for children made of 1mm wetsuit fabric with good elasticity and less pressure.
It provides warmth, prevents sunburn, and protects children's delicate skin from scratches.

Even children who grow quickly can wear separates and types, even if the length is a little short.
It is also ideal for preventing injuries below the knees when playing on the rocky shore.
If you set it with the Tupperware sold in the series, you can protect yourself from the cold and expand your range of play.

■Material: 1mm chloroprene

■Product measurement values ​​(other than total length, flat/width representation)
[Size] Waist/cross width/thigh width (*)/knee width/total length [120] 56 /18 /16 /13 /62
[130]58 /20 /17 /14 /67
[140]62 /22 /18 /15 /72
[150]65/23/19/16/80
(*Thigh width = measured between the crotch and the knee)
・Please forgive any errors due to measurements made by our staff.
・Please use this as a guide.

Jet ski Watercraft Watercraft Watercraft SUP Snorkeling Scuba diving Surfing Marine sports Beach swimming Pool Trekking River fishing Boat Kayak Canoe UV care Sunscreen UV protection Water repellency

This 1.5mm ladies full suit can be used all year round!
Suitable for all water sports including surfing, diving, wakeboarding, flyboarding, snorkeling, SUP, kayaking, etc.
It is lightweight and compact, making it ideal for travel.
Thin, easy-to-wear wetsuits are recommended for first-time swimmers.
This wetsuit will keep you in comfortable conditions at all times.

[Compact storage]
Made from a thinner 1.5mm chloroprene material than conventional diving or surfing wetsuits, it is approximately half the weight!

[Lightweight and easy to carry]
The material is wrinkle-resistant even when folded, without the pressure of conventional wetsuits

[Protect yourself from injury]
The chloroprene rubber that covers the entire body acts as a cushion to protect the skin from injury.

[Keep body temperature]
Although it is thin, it is made of the same chloroprene material as diving and surfing wetsuits, so its excellent heat retention keeps you comfortable at all times.

[Sun protection]
Protects your skin from strong sunlight and harmful UV rays.

[Supports muscles]
The new material "SOFLEX" with excellent elasticity is used all over the body, so it is easy to put on and take off! The optimal stretch provides precise support for the muscles of the entire body.

■ Thickness 1.5mm
■Material: Chloroprene ■Sizes (Women): S, M, ML, L, LB, XL

Not only does it keep you warm, it also protects your body from UV rays, injuries, and jellyfish.
The back zipper design keeps the front of the body neat. The zipper is made of rust-proof plastic and closes flat. The long tape ribbon attached to the puller is useful when putting on and taking off the jacket, so please do not remove it.

[Storage] Wash as soon as you get out of the ocean. Do not use hot water! Dry on a sturdy, thick hanger, avoiding direct sunlight! A well-ventilated shady area is best! Store by hanging to avoid wrinkles!

This 1.5mm men's full suit can be used all year round!

Suitable for all water sports including surfing, diving, wakeboarding, flyboarding, snorkeling, SUP, kayaking, etc.
It is lightweight and compact, making it ideal for travel.
Thin, easy-to-wear wetsuits are recommended for first-time swimmers.
This wetsuit will keep you in comfortable conditions at all times.

[Compact storage] Made of 1.5mm chloroprene, which is thinner than conventional diving or surfing wetsuits, it is approximately half the weight!

[Lightweight and easy to carry] The material does not feel oppressive like traditional wetsuits and does not wrinkle easily even when folded.

[Protects from injury] The chloroprene rubber covering the entire body acts as a cushion to protect the skin from injury.

[Keeps body temperature] Although it is thin, it is made of the same chloroprene material as diving and surfing wetsuits, so its excellent heat retention keeps you comfortable at all times.

[Sun protection] Protects your skin from strong sunlight and harmful UV rays.

[Supports muscles] The new material "SOFLEX" with excellent elasticity is used all over the body, so it is easy to put on and take off! The optimal stretch provides accurate support for muscles all over the body.

■ Thickness 1.5mm
■Material: Chloroprene ■Sizes (Men's): M, ML, MLB, L

Not only does it keep you warm, it also protects your body from UV rays and traumatic jellyfish.
The back zipper design keeps the front of the body neat. The zipper is made of rust-proof plastic and closes flat. The long tape ribbon attached to the puller is useful when putting on and taking off the jacket, so please do not remove it.

[Storage] Wash as soon as you get out of the ocean. Do not use hot water! Dry on a sturdy, thick hanger, avoiding direct sunlight! A well-ventilated shady area is best! Store by hanging to avoid wrinkles!

Playing in the sea or river can often lead to foot injuries, but these children's marine shoes will eliminate that worry. They are highly breathable and allow any water that seeps into the shoes to escape quickly.
Since it is made of airplane material, it is amphibious and perfect for playing in the water.
The soles flex and move with your feet, making them extremely comfortable to walk in.

■Material: 2mm chloroprene, 5% spandex, soft rubber sole

■Size: 14cm to 23cm

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard
Children, Toddlers, Babies, Kids, Juniors, Marine Sports
ACTIVITIES WATERSPORTS BOAT YACHT KAYAK
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest

This life jacket is made from the same material as wetsuits and is gentle on children's skin.
Safety has also been taken into consideration, with features such as a crotch belt to prevent the hat from falling off, a whistle, and reflective tape on both shoulders.
This is a Japanese brand life jacket that puts children's safety first and also provides cushioning.

■MATERIAL 100% chloroprene

■ Suitable height size
S: 110-130cm
M: 120-140cm
L: 130-150cm

This is a special life jacket designed for your child's safety.
In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

There are three safety buckles, two on the torso and one on the crotch belt, to prevent the life jacket from loosening or floating around the shoulders due to the influence of water currents. Available in sizes S to L, please choose the size that best suits your child. We recommend choosing the right size as a safety item.

■ Suitable height size M: 120-140cm
L:130-150cm
■MATERIAL: Reflective tape/Rescue whistle included

【Note】
This is a special life jacket designed for your child's safety.
In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

There are three safety buckles, two on the torso and one on the crotch belt, to prevent the life jacket from loosening or floating around the shoulders due to the influence of water currents. Available in sizes S to L, please choose the size that best suits your child. We recommend choosing the right size as a safety item.

■ Suitable height size
S: 110-130cm
M:120-140cm
L: 130-150cm
■MATERIAL: Reflective tape/Rescue whistle included

[Caution] Not compatible with legal equipment for small boat inspections. This product is a swimming aid and should always be used under parental supervision.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, beat board, children, toddlers, infants
Kids Junior Marine Sports Activities WATERSPORTS Boat Yacht Kayak SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest

These board shorts are made of 4-way stretch material that stretches in 4 directions.
It accommodates every movement and guarantees comfort.
The color scheme border stands out against the simple colors.

◆Material: 89% polyester, 11% polyurethane

◆Size (total length/hip/waist/hem width)cm
28 inches: 48/98/74/26
30 inches: 48/100/78/26
32 inches: 51/104/82/27
34 inches: 51/108/86/27
*Measurements are taken when placed flat *There may be slight differences depending on the design.

●A set of 4 cans of the popular Wako Eco Plus boat bottom paint.

●Bottom paint for pleasure boats and fishing boats with improved work efficiency WAKOECO Plus [cuprous oxide compound type] 4kg

●The product has evolved into ``WAKOECO Plus,'' which has significantly improved barnacle resistance than the previous ``WAKOECOα.'' Ideal for barnacle control in highly polluted areas and on ships with low operation.

●Seawater is decomposed by a weak electric current generated by special ceramics, forming an anion barrier. The repellent effect is generated by the repulsion between carboxyl (anion) on the cell surface of bacteria and the anion barrier.

●The anion barrier allows antifouling ingredients containing cations to be drawn out naturally and evenly to the surface. Cuprous oxide, which has become cationized by the infiltration of seawater, is attracted to anions.

●One of the problems with existing ship bottom paints is that the antifouling ingredients flow into the ocean while the paint is melting. With our unique antifouling system, we have succeeded in reducing paint elution by approximately 20% compared to conventional hydrolyzable paints without reducing the antifouling effect.

*Due to the material of the product, there may be some dents on the can. We apologize for any inconvenience, but we cannot accept any complaints other than liquid leakage.

[Painting method]
1. The ingredients will settle at the bottom of the can, so mix thoroughly with an electric mixer etc. before painting.
If painting takes a long time, please stir 2 to 3 times during the painting process.

2. Please dilute the thinner within 5%.

3. Please keep the amount of paint applied according to the bottom area of ​​the ship.

4. Please carefully observe the submersion replacement time.

●Bottom paint for pleasure boats and fishing boats with improved work efficiency WAKOECO Plus [cuprous oxide compound type] 4kg

●The product has evolved into ``WAKOECO Plus,'' which has significantly improved barnacle resistance than the previous ``WAKOECOα.'' Ideal for barnacle control in highly polluted areas and on ships with low operation.

●Seawater is decomposed by a weak electric current generated by special ceramics, forming an anion barrier. The repellent effect is generated by the repulsion between carboxyl (anion) on the cell surface of bacteria and the anion barrier.

●The anion barrier allows antifouling ingredients containing cations to be drawn out naturally and evenly to the surface. Cuprous oxide, which has become cationized by the infiltration of seawater, is attracted to anions.

●One of the problems with existing ship bottom paints is that the antifouling ingredients flow into the ocean while the paint is melting. With our unique antifouling system, we have succeeded in reducing paint elution by approximately 20% compared to conventional hydrolyzable paints without reducing the antifouling effect.

*Due to the material of the product, there may be some dents on the can. We apologize for any inconvenience, but we cannot accept any complaints other than liquid leakage.

[Painting method]
1. The ingredients will settle at the bottom of the can, so mix thoroughly with an electric mixer etc. before painting.
If painting takes a long time, please stir 2 to 3 times during the painting process.

2. Please dilute the thinner within 5%.

3. Please keep the amount of paint applied according to the bottom area of ​​the ship.

4. Please carefully observe the submersion replacement time.

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

SOREX ZERO trailer sticker
■Size: 1000x50mm
■Sold in units of 1 piece

STKS15-ZERO17-B Black 1 piece
STKS15-ZERO17-W White 1 piece

SOREX trailer sticker
■Size: 510×51mm
■Color selection, sold in units of one piece

STK001-BLA
STK001-REA

ST-089-42 Chain brake (U bolt size 42×100mm)
ST-089-47 Chain brake (U bolt size 47×100mm)
ST-089-52 Chain brake (U bolt size 52 x 100mm)

[Ordered products]

■Wooden bank ■Total length: 1,850mm

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

【please】
When ordering, please let us know the trailer model and installation location.

■Lineup
SRX-016-B1 For side frame
SRX-016-B2 for tongs
SRX-016-B3 Wide

*10 inch wide tires are
It can be mounted vertically to the side frame using the wide (SRX-016-B3) bracket.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatibility] For SEA-DOO(08-09) RXP-X / RXT-X

[1] SE-027018 STD standard handlebar (Φ22.4)
[2] SE-027018F FAT fat handlebar (Φ28.6)

steering system.

●This is a steering mount system designed with an image that emphasizes the letter X.
●Compared to other companies' products, the strength of the front cowl mounting stay is increased by billet and welding.
●Also, the surface is buffed and anodized to give you a high-dimensional stylish look.

[Compatible with] SEA-DOO (04-) 4TEC

[1] SE-027016 STD standard handlebar (Φ22.4)
[2] SE-027016F FAT fat handlebar (Φ28.6)

It's a steering system
A cool design with a 4TEC image.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHT08: Outer diameter 8× 8× 8mm/Inner diameter 5× 5× 5mm
NHT10: Outer diameter 10 x 10 x 10 mm / Inner diameter 7 x 7 x 7 mm
NHT12: Outer diameter 12×12×12mm/Inner diameter 10×10×10mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRT1008: Outer diameter 8×10×10mm/Inner diameter 5×7×7mm
NHRT1210: Outer diameter 10 x 12 x 12 mm / Inner diameter 7 x 8 x 8 mm
NHRT1412: Outer diameter 12 x 14 x 14 mm / Inner diameter 8 x 10 x 10 mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRE0806: Outer diameter 6 x 8mm/Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm/Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm/Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14 mm / Inner diameter 8 x 10 mm

[Nekopos shipping products]
*Credit card payment or advance transfer only *Date and time cannot be specified *For cash on delivery, shipping fee is 800 yen/Hokkaido/Okinawa 1,500 yen (excluding tax)
*Other products ordered at the same time are not eligible for free shipping.