Collection: merchandise

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

This hose has a special coating applied to its surface.

[Product specifications]
■For water (*no oil allowed)
■Size: Inner diameter/thickness/length
JL40SHL19RD: 19mm /4mm /1m
JL41SHL13RD: 13mm /4mm /1m
JL40SHL8RD: 8mm/4mm/1m

■Maximum pressure resistance for regular use 5kg/cm
■Regular heat-resistant temperature ~180℃

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

[PWC compatible models]

For SEA-DOO SPARK

(For other models, see below)
*4-stroke model numbers other than 300 and SPARK: DCPR8E
*300 (RXT-X/RXP-X/GTX-LTD300) Part Number: 296000407
●SEADOO genuine part number: 415129403

*The image is for illustrative purposes only.

AK Spring Hook with Eye

Material: Body = SUS316 Spring = SUS304

6mm: d=6 L=60 L1=48 B=35 S=12 D=9, weight: 30g, working load: 70Kg
8mm: d=8 L=80 L1=64 B=46 S=18 D=12, weight: 70g, working load: 150Kg
10mm: d=10 L=100 L1=80 B=56 S=21 D=15, weight: 135g, working load: 200Kg
12mm: d=12 L=120 L1=96 B=68 S=25 D=18, weight: 232g, working load: 300Kg

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

CASTRO
Castro Fender was born in Spain in the early 1970s by founder Carlos Castro.
Castro is now one of the world's largest manufacturers of buoy fender floats.
Our products are sold in over 70 countries around the world and are widely praised for their outstanding quality and innovative design.

■Size: Diameter/Total length/Eye diameter
A-0HD: 200mm / 270mm / 25mm
A-1HD: 290mm / 370mm / 25mm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it extremely durable. ,
●Can also be used as a course buoy if installed upside down.
●You can easily inflate with an air compressor or air gun.

【please note】
*Air injection nozzle not included *Delivered with air removed *As this is an overseas product, specifications may change without notice.

[Product specifications]
■Material: Nylon ■Rope diameter: 1/2 (12.7mm)
■Length: 200ft (60m), 300ft (90m)

An easy-to-handle nylon triple rope with excellent abrasion resistance, strength, and flexibility.

Handrails (handrails, safety bars) that can be installed anywhere, including on boats.
Made of stainless steel (SUS304), it is rust resistant and highly durable.
The mounting flange is of the covered type, so it looks neat. The surface has a mirror finish.
To install, securely fasten in three places on each side with tapping screws, and click the covers on each side to complete.

[Product specifications]
■Material: Stainless steel (SUS 304) Mirror finish ■Accessories: Tapping screws x 6, PC plugs x 6

This is a jacket from the JJETPILOT RX "VAULT" series.

Uses stress-free material ``embossed neoprene'' to achieve comfortable PWC riding.

●100% 360 stretch neoprene for maximum mobility
●Durable YKK back zip for easy on and off
●Jet-lock seam construction increases strength
●Oil slick logo

Can be set up with long johns (product number JA22155) sold separately.

■Applicable image size (height, weight, chest measurement, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm
XL: 180-185cm, 77-85kg, 105-110cm, 84-88cm

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

[Applicable model] YAMAHA Yamaha
VX series (new model (2015-2018) VX / VXR / VXS / VX Cruiser HO / DELUX)
GP1800(2017)

*For VXRs up to 2014, the product number [Y-5S: Silver, Y-5B: Black] is compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

Y-5S-1 Silver
Y-5B-1 black

The Rompa Slash with a back zipper is available only in baby sizes.
Protects your small body from cold and abrasions.

This is an essential sun protection product that protects children's skin, which has less melanin than adults and is vulnerable to harmful UV rays.
Stitched with soft threads that won't rub or hurt even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

■[Applicable size]
80cm: 70-90cm
90cm: 80-100cm
100cm: 90-110cm

*We cannot accept returns or exchanges for special price items.

[Compatible models] SEADOO 951-DI

●Sold in units of 1 piece *Image is for illustrative purposes only.

[Compatible models]
VXS/VXR/VX HO/FX HO(09-) limited engine recommended
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 14/23
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
Stock engine recommended for FZS/FZR (normal boat)
Stock engine recommended for FX SHO (normal boat)
VXS/VXR/VX HO/FX HO(09-) limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/22
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] YAMAHA
VXS/VXR/VX HO/FX HO(09-) stock engine recommended (normal boat)
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/19
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
YAMAHA / SEA-DOO PWC (excluding 4-stroke models)

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.

*We recommend supplementary charging after purchase.
When replenishing battery fluid, be sure to use distilled water or a special replenisher, as tap water may cause problems.

[Compatible models] SEADOO
GTR (12-19)
GTI (11-19)

Control in cornering and rough conditions will be dramatically improved.

[About installation]
Can be installed by bolt-on to the genuine hole

[Applicable model] SEADOO S3 hull
GTX('10-'17)
iS255
iS260

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models]
KAWASAKI Kawasaki
800SX-R(03-)
800X-2

■Plate length: 490mm

It has a wavy design for racing.
The feature of Works Dominator plate is the original D cut hole.
It attracts the hull and water surface, giving you a reliable grip in any water surface condition.
Designed to be longer than the genuine ride plate, it also improves straight-line stability.

[Compatible models] SEA-DOO
RXP-X300('16-'20)
RXP-X260('12-'15)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] YAMAHA
FX('12-) FX SVHO('14-20)
FX SHO('12-'13)
FX HO('12-'16)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] SEA-DOO
RXT-X300(-'17)
RXT-X260/is260/iS255
GTX('10~'17)
WAKE215('10~'17)

This is a Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance, yet top speed does not decrease,
We test the best conditions and utilize them in our products.

[Compatible models]
YAMAHA Yamaha SJ(08-20)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] KAWASAKI ULTRA series
ULTRA310 (~'21)
ULTRA300X
ULTRA300LX
ULTRA LX ('12～)

*ULTRA250/260 is not compatible.

[Product Name] ULTRA310/300X Front Cowl FRONT COWL

■Black gel coat finish.

It is designed to be easily converted from normal food.
Since the normal inner is used as is, the normal storage box can also be used!
Compared to the normal hood (without innerwear) which weighs approximately 3.5kg, the weight can be reduced by approximately 20%.

※※This is an unpainted product, so please paint it in your favorite color before use. ※※

【Guidance】
*Made-to-order products (usually takes about 3 weeks) Please contact us for the approximate delivery date before placing your order.
*Please note that we cannot accept cancellations or returns.

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Manufacturer] SUZUKI
[Car model] Escudo
[Compatible car model] TA02W/52W, TD02W/32W/52W/62W TL52W
[Year] H9.11-H17.4
[Compatible grades] JM, JZ, G Limited, V6, 2.0GT [Supplement] S Limited cannot be installed

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] LTDⅡ
[Processing] T-2
[Drilling]-
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Paigelonia H7.11~H10.9 (H57A), Pajelomini H6~H10 (H51A/56A)

*Free shipping (*Cannot be delivered to Okinawa/Hokkaido)
*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1. A room in an apartment building 2. A religious corporation, shrine, or temple 3. If it cannot be determined that it is a corporate building 4. If it is determined that there is a risk of intrusion by a delivery truck 5. If delivery is hindered due to other special circumstances When judged

MITSUBISHI DELICA SPACE GEAR
Compatible models: PD4W to 8W PE8W
*Special harness included

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

PD4W～8W PE8W

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Compatible car model] E24 series S61.9 to H13.3 *Super long wagon cannot be installed

[LIMITED2 (stainless steel)]
Stylish stainless steel model. Uses [SUS304] with excellent corrosion resistance and strength.

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

Wish [Compatible car model] DBA-ZGE25W, DBA-ZGE20G
[Compatible grade] 1.8S (4WD), 1.8X (2WD)
[First year registration] H21.4 - H22.3

[Traction force] C (up to 750kg)
[Estimated installation time] 3 hours Drilling in 2 locations

[LIMITED2 (stainless steel)]
Stylish stainless steel model. Uses [SUS304] with excellent corrosion resistance and strength.

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

Wish [Compatible car model] DBA-ZGE25W, DBA-ZGE20G
[Compatible grade] 1.8S (4WD), 1.8X (2WD)
[First year registration] H21.4 - H22.3

[Traction force] C (up to 750kg)
[Estimated installation time] 3 hours Drilling in 2 locations

[STANDARD (made of steel)]
Chic black finish.

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5 m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.

[About delivery to Okinawa and remote islands]
1.Due to shipping, it will be delivered 7-10 days after shipping.