Collection: All items

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

Applicable Models: Kawasaki ULTRA310LX/310LX-S

By using the tie-down kit,
large items such as cooler boxes and fuel cans can be easily secured.

■Approx. 40kg load capacity (88lbs load capacity)

【Note】
*Securing items such as lashing straps are not included.
*This product is not intended for towing, so please do not use it for that purpose.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these conditions.

KAWASAKI Genuine (Black)
■Net volume: 100g

This is a silicone-based liquid gasket.
It offers excellent cold, heat, water, and oil resistance, and cures at room temperature to form a rubber-like elastic body.

【Please Read Before Ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging these points in advance.

[Compatibility] Kawasaki 1500SX-R (2017~) / SEADOO Spark, etc.
[Product number] J-150S / Jet Launcher 4-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
■Total weight: 31 kg
■Frame weight: 13 kg
■Material: Aluminum

●1.4 times stronger than conventional frames
●Each bracket part is securely fastened with M8 bolts and nuts without wobbling. ●The frame is lengthened to improve balance according to the length of the boat, and the axle part is reinforced to withstand the weight of 4-cycle engines.
The axle shaft is a single piece (left and right through pipe) like the runabout jet launcher, and the axle square frame and shaft collar are made of glass fiber reinforced plastic molding, ensuring a tight and secure fit without wobbling.
●The handle part has a bar grip type shape for easy carrying by two people on both sides.
.

*Shafts and plastic collars should be replaced periodically.
*2-3 people are required for loading at the waterfront and transporting on sandy beaches.
*For rearward movement, it is recommended to have the boat's rear facing the handle side, but when carrying in the opposite direction, please be careful of fatigue and damage to the handle side due to load, and if the ride plate at the rear of the boat touches the ground.
.

[About payment and packaging]
For manufacturer-direct products
●Payment only. (Cash on delivery not accepted)
●Cannot be combined with other items

[About delivery]
If the recipient of this product is a private residence, a separate handling fee may be required for the billing amount.

【】Product number J-1480-4X / Jet Launcher 4-Wheel
【Compatibility】All models (suitable for tandem/runabout) *With center reinforcement frame

【Product Specifications】
■Overall length x Overall width x Rail width: 2,160 x 1,070 x 480mm
■Total weight: 37kg
■Frame weight: 12kg
■Sliding rail, hook standard equipment

【Double Hook Specifications】
Even 300kg class models can be moved easily and smoothly.
Direction changes are now even more convenient with a handle for angling in 2-wheel mode. It is more balanced than a 2-wheel type, and even large, heavy boats nearby can be moved just by pushing.

【Payment and Packaging】
This is a direct shipment product from the manufacturer.
●Payment only. (Cash on delivery not available)
●Cannot be bundled with other items

【Delivery】
If the recipient of this product is an individual, a separate fee may be required in addition to the billed amount.

[Capacity] 4L x 6 cans per case, steel cans
★★Buying a case is a better deal!! ★★

●Boasts excellent lubricity even in high-revolution engines.
●A base oil that particularly emphasizes thermal and oxidation stability.
●The blend of high-temperature detergency additives helps keep the engine interior clean.

KAWASAKI Genuine 4-Cycle Engine Oil

[Delivery Information]
・Due to the product's shape, it cannot be combined with other products.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Furthermore, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order with this understanding.

●DENSO Iridium plug (NGK plug compatible with CR9EKB)
●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

step wagon

[Compatible models] RK1, 2, 5, 6

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Hole required
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

[Applicable] Hose inner diameter 16 to 18φ
[Size] Inner diameter 14mm Threaded part outer diameter 26mm

The models below can be easily connected to a water hose with a hose adapter.
SEADOO
●Models equipped with 951 engine (RX, XP, GTX, etc.)
●GTX4-TEC ~RXT

*This is the same product as the conventional GES0616 gray.

Manufacturer: NISSAN
Car Model: Stagea
Compatible Model: C34
Model Year: H8.9 - H13.10 (Sept. 1996 - Oct. 2001)
Compatible Grade: All grades compatible
Notes: For models from Aug. 1998, bracket inside the bumper may require cutting.

Type: STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

Towing Capacity: C
Shape: F-1
Processing: D-1 / (K-2)
Drilling: 2
Installation Time: 4 hours

Regarding the product:
● All hitch receivers are made-to-order (estimated delivery time is approximately 10 days to 2 weeks*). *Delivery time varies depending on car model and material.
● Depending on the material and type, some products are made-to-order, so cancellations and changes after an order has been placed are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for fitment confirmation.

Disclaimer:
・Please confirm fitment before placing an order. Fitment confirmation after an order has been placed is not possible.
・Photos are examples; installation methods and shapes vary depending on the car model. Additionally, processing may be required on the towing vehicle side, so please inquire for details.
・As these are made-to-order products, returns and exchanges are not possible.

Shipping Information:
・Due to the shape of the product, co-shipping with other products is not possible.
・Basically, as products are shipped directly from the manufacturer, cash on delivery (COD) is not accepted.

*Shipping to freight company's sales office is not possible.
*Delivery is limited to corporate/company addresses and some private residences.
Delivery is not possible in the following cases:
1. An apartment unit in a multi-unit dwelling
2. Religious corporations, shrines, or temples
3. Cases where the location cannot be identified as a corporate office
4. Cases where it is deemed dangerous for a delivery truck to enter
5. Other special circumstances where delivery is deemed to be impeded

【Manufacturer】 TOYOTA
【Car model】 Caldina
【Compatible model number】 E-ST215W
【Model year】 H9.8～H11.12
【Compatible grade】 GT-T

【Type】 STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】 C
【Shape】 F-1
【Processing】 -
【Drilling】 6
【Installation time】 4 hours

【Regarding the product】
● All hitch members are made to order. (Estimated delivery time is about 10 days to 2 weeks*) *Varies depending on car model and material.
● Depending on the material and type, some products are completely custom-made, so cancellations and changes after ordering are not possible.
● For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・ Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・ The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・ As this is a made-to-order product, returns and exchanges are not possible.

【Shipping Information】
・ Due to the shape of the product, it cannot be combined with other products.
・ Basically, payment on delivery is not possible as it is a direct shipment from the manufacturer.

※Cannot be shipped to a freight company's sales office
※Delivery limited to corporations/companies and some private residences
In the following cases, delivery cannot be accepted.
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate office building
4. Cases where it is determined that there is a danger of a delivery truck entering
5. Other special circumstances where delivery is determined to be difficult

[PWC compatible models]
KAWASAKI 15F (2016-) / ULTRA LX (2016-) / SX-R 4-stroke

★15F/ULTRA LX up to 2015 is [product number CR9EK]

●KAWASAKI genuine part number: 92070-0050

*The image is an illustrative image.

[PWC compatible models]

◆KAWASAKI For Kawasaki 4-stroke
12F / 15F (-2015) / 15S / ULTRA LX(-2015)

★For 15F/LX from 2016 onwards, product number: CR9EKB

●The plug tip is screw-type

●KAWASAKI genuine part number: 92070-1264

*The image is an illustrative image.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

BR8ES-10
●Sold in cases of 10 plugs.
●Solid Type Terminal: The terminal nut is not removable.
Terminal Type:Solid(non separated)

【Guidance】
※Also available individually.
※The image is for illustrative purposes only.

[Contents] 454g

●Belray Water Resistant Grease is completely water resistant even to salt water, and can be applied to wheel bearings, bushings, and chassis lubrication points to provide the best lubrication and corrosion resistance.

●It can be used for many purposes, and has water resistance, heat resistance, excellent rust and corrosion resistance, load capacity, impact resistance, and abrasion resistance.

●This product is a high-performance general-purpose grease manufactured with an aluminum composite and barium composite structure.

●Meets all bearing lubricant needs for jet, trailer, marine, automobile, motorcycle, snowmobile/ATV applications.

●Can also be used for trailer wheel bearings on boat trailers and caster wheels on snow blowers where salt resistance and water resistance are essential.

●Provides maximum long-term protection from wear, rust, water washout, etc.

●NGL viscosity grade #2

The wiring socket can be installed at any position on the towed vehicle.

Made by SOREX

A large size bag that can store a complete set of clothing.

Top zipper length: 78cm
Height: 45cm
Gusset: 25cm

SUZUKI Outboard High Bond Gear Oil 400ml
ECSTAR OUTBOARD MOTOR GEAR OIL

●This is a specialized gear oil developed for Suzuki outboard motors.
●It provides excellent extreme pressure properties, high oil film strength, superior water separation, and water resistance, effectively preventing abnormal wear and noise in various gears within the gear case.

●Class 4 Petroleum Group 4
●Hazard Class 3
●Viscosity: SAE90
●API Classification: GL-5

【Applicable Models】 Gear oil approximate capacity
DF2: 70ml
DF5/5A/6A: 190ml
DF8A/9.9A: 250ml
DF9.9/15: 170ml
DF9.9B/15A/20A: 250ml
DF25(V2): 420ml
DF25A/30A: 330ml
DF25/30(3-cylinder): 230ml
DF40/50/40A/50A/60A: 610ml
DF60AV/60/70: 1050ml
DF70A/80A/90A: 850ml
DF90/100/100A/115/115A/140/140A: 1050ml
DF150/150TG/175/175TG/200A/200AP/200/225/250/250AP/300/300AP: 1100ml

【Disclaimer】
※Genuine parts may have their part numbers changed without prior notice.
※Due to part number changes, the part number displayed on the page may differ from the one delivered. Please be aware of this in advance.
※Packaging may vary depending on the time of arrival. Please be aware of this in advance.
99000-22B22-000 → 99000-22B33-000

Hiace 200 Series, 4th Gen Late/4.5 Gen/5th Gen, Diesel/Gasoline (Standard Body)

【Compatible Vehicle Models】
■CBA-TRH214W ■CBA-TRH219W
■CBA-TRH224W ■CBA-TRH229W■QDF- 4th Gen Late/4.5 Gen/5th Gen

【First Registration】November 2017～

【Steel (Steel Type)】
Basic type of tight hitch.

【Set Contents】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wire tap / High-tension bolts for hitch installation

【Regarding the Product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●As these are completely build-to-order products, please note that cancellations and changes after ordering are not possible.
●For some vehicle models, we may request a fax of your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from compatibility checks after ordering.
・The photos are examples, and the installation method and shape will vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As these are made-to-order products, returns and exchanges are not possible.

【Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.

【Compatible models】 YAMAHA
FX140/160/VX (09~)
Compatible with vessels with engine displacement of 1800cc or less

【About Oil Filters】
Inside the engine, sludge generated from impurities in fuel and oil, and
metal powder from friction between cylinders and piston rings, etc., are produced.
The engine oil washes away these generated particles, allowing the engine to continue functioning normally.
However, with repeated use over a long period, the engine oil becomes dirty and degrades.
The filter cleans the oil and prevents re-adhesion of dirt and degradation.
The role of the oil filter is to maintain the long life cycle of the oil.

【Guidance】When removing, please use the separately sold tool "Part number: Q5W-MIT-001-088".

【Disclaimer】
*Genuine parts may have their part numbers changed without prior notice.
*Due to part number changes, the part number displayed on the page and the part number delivered may differ. We appreciate your understanding in advance.
5GH-13440-71 5GH-13440-72 5GH-13440-30

PWC Jet Ski Marine Jet Yamaha Yamaha Motor Oil Change

【Please read before ordering】
This product is a **manufacturer-取り寄せ商品 (genuine part)**.
Once an order is confirmed, we promptly place an order with the manufacturer. Therefore, cancellations or changes to order contents due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
We kindly ask for your understanding before placing your order.

SUZUKI Outboard Genuine Protection Anode

【Material】Corrosion-resistant zinc
【Compatibility】Usage location: SUZUKI 4-stroke outboard models

●Cylinder: DF2・DF8A/9.9A
●Cylinder Head: DF5A/6A (Installed behind the thermostat)・DF25(V2)

【Note】
※Genuine product part numbers may change without prior notice.
※Due to part number changes, the part number displayed on the page may differ from the one delivered. We appreciate your understanding.
55321-95J00

SUZUKI Outboard Motor Genuine Protection Anode 55321-87J01

[Material] Corrosion-resistant zinc
[Compatibility] Application: SUZUKI 4-stroke outboard motors

● Gear case: DF2・DF5・DF5A/6A・DF8A/9.9A・DF9.9B/15A/20A・DF70A/80A/90A
● Driveshaft housing: DF5・DF25(V2)・DF60AV

● Cylinder head: DF8A/9.9A・DF9.9B/15A/20A・DF40/50(2005-)・DF40A/50A/60A/60AV・DF70A/80A/90A・DF90(421060-)・DF115(421141-)・DF150/175/150TG/175TG・DF200A/200AP・DF200/225/250・DF300/250AP/300AP
● Cylinder block: DF40/50・DF40A/50A/60A/60AV・DF100A(510032-)・DF115A(510411-)・DF140A(510550-)・DF150/175/150TG/175TG・DF200A/200AP

● Clamp bracket (PTT spec only): DF9.9B/15A/20A・DF25(V2)・DF25A/30A・DF40A/50A/60AQ spec (2015-)・DF60AV
● Swivel bracket: DF9.9B/15A/20A (PTT spec + transom L・X only)・DF25(V2)・DF25A/30A・・DF150/175/150TG/175TG
● PTT (PTT spec only): DF9.9B/15A/20A・DF25/30 (3-cylinder)・DF25A/30A・DF40/50 (2001-)・DF40A/50A/60A/60AV・DF60/70 (2001-)
● Oil pan: DF25(V2)・DF200A/200AP・DF200/225/250・DF300/250AP/300AP
● Case, extension (LL spec only): ・DF25(V2)
● Gas assist (gas assist spec only): ・DF25(V2)・DF25/30 (3-cylinder)・DF25A/30A・DF40/50 ('01-)・DF40A/50A/60A/60AV

● Exhaust cover: DF25/30 (3-cylinder)・DF70A/80A/90A・・DF150/175/150TG/175TG・DF200/225/250・DF300/250AP/300AP
● Exhaust manifold: DF25A/30A・DF60/70
● Extension case: DF70A/80A/90A (transom X spec)
● Rectifier: DF90/100/115/140/100A/115A/140A
● Propeller shaft housing: DF300 (-2011)

[Disclaimer]
※Genuine parts are subject to part number changes without prior notice.
※Due to part number changes, the displayed part number on the page may differ from the delivered part number. We appreciate your understanding in advance.

This is an inflatable towing tube designed to be pulled by a jet ski or boat.
It features a classic, simple deck-type shape.
Because your eye level is close to the water during towing, you can enjoy a top-class thrilling experience.

■Size: 144×144×35cm
■Capacity: 2 people
■PVC tube
■1 towing point
[This series is available in 2-person and 3-person models]
*Main unit only, pump and rope are not included.

■7-pin type wiring socket for lights on the towing vehicle side

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■Trailer side 7-pin type wiring socket for lights

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

The buckle and ratchet sections have been made even more durable.
The hook features an anti-detachment function.

● Belt width: Approx. 25mm
● Belt length: Approx. 4.5m
● Ratchet to S-hook: Approx. 29cm
● Hook diameter: Φ10 (10mm)

[Fits] SUZUKI Outboard Motors DF8A/9.9A/9.9/15/9.9/15A/20A
SUZUKI Outboard Motor Oil Filter

[Disclaimer]
*Genuine parts are subject to part number changes without prior notice.
*Due to part number changes, the part number displayed on the page may differ from the part number delivered. Please be aware of this in advance.
16510-45H10

Effective for use on sandy soil.
Rather than hooking it to the ocean floor (river bottom), it is held in place by the weight of the anchor itself.
The surface is coated with PVC to prevent scratches and rust on the hull.

[Product specifications]
■Set contents: Anchor, rope with float (length approx. 5m), 2 hooks ■Weight: 3kg
■Material: PVC coating ■Applicable to: PWC (personal watercraft), rubber boats, bass boats, etc. ■Size: Approximately Φ15cm x body height approximately 17cm (excluding shackle)

*Please check the tightness of the shackle before each use.
*If it is loose, please be sure to tighten it before use as it may cause it to come off. *As this is an overseas manufactured product, there may be unevenness in the PVC coating.

[Original storage bag]
The highly stain-resistant and waterproof fabric can also be used to store small items for outdoor activities.There is a cushion pad on the bottom, making it useful as an anchor bag.The wide opening makes it easy to put in and take out small items.There is a top button to prevent the contents of the bag from coming out. ■Product size: Bottom diameter 19cm x height 34cm

【rope】
Rope length approximately 6m (with 2 hooks)

【please note】
*Photography accessories such as fenders are not included in the set.
*Due to the shape of the product, some products cannot be bundled together.

Carry

【Compatible vehicle model】DA16T

【Towing capacity】A (40kg or less)

※Drilling required

【Steel (Steel Type)】
Tight HITCH's basic type.

【Set Contents】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle-side electrical wiring connector / Wiring tap / High-tension bolts for hitch installation

【Regarding the Product】
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Since this is a build-to-order product, cancellations and changes after ordering are not possible. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before ordering. We cannot confirm compatibility after an order has been placed.
・The photo is an example; the installation method and shape vary depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please inquire for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Shipping Information】
・Due to the shape of the product, it cannot be shipped with other products.
・Basically, products are shipped directly from the manufacturer.

【About Delivery】
Shipping costs for delivery to Okinawa Prefecture will be quoted separately each time.

【Volume】1L ×1 bottle

■Class 4, Petroleum Class 4, Hazard Class 3
■Viscosity: 10W-30
■API Classification: SL

This oil is based on automotive oil,
and has been developed for the harsh operating conditions of marine engines (high oil temperatures, high RPMs, saltwater, etc.).
It exhibits excellent performance in terms of detergency, wear resistance, high-temperature oxidation stability, and shear stability.

※Case sales are also available. Please order part number: 【90790-71513C】.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Since orders are placed with the manufacturer immediately after confirmation, cancellations or changes to order contents due to customer convenience cannot be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.

Lexus NX300 10 Series *Late Model/Normal/F SPORT compatible

【Compatible Model】DAA-AYZ10

【Steel (Steel Type)】
Tight Hitch's basic type.

【Set Contents】
Steel Hitch Ball / Steel Ball Mount / Steel Ball Mount Lock Key / 6-core Wire / Vehicle-side Electrical Wiring Connector / Wiring Tap / High-Tensile Bolts for Hitch Installation

【Regarding the Product】
● All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on car model and material.
● Since this is a completely build-to-order product, please note that order cancellations and changes are not possible after the order has been placed.
● For some car models, we may ask you to FAX your vehicle inspection certificate for fitment confirmation.

【Important Notes】
・Please confirm compatibility before placing your order. We kindly ask you to refrain from compatibility checks after placing your order.
・Photos are examples; the installation method and shape vary depending on the car model. In some cases, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a build-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the product's shape, it cannot be combined with other products.
・Generally, products are shipped directly from the manufacturer.

【About Delivery】
Shipping costs to Okinawa Prefecture will be quoted separately each time.