Product details
●Nuperakurin PLUS is a set of antifouling paint for propellers that does not contain chromic acid compounds and is friendly to people and the environment.
●An epoxy resin primer that has excellent adhesion to the propeller surface that rotates at high speed and forms a strong coating, and a newly formulated silicone resin antifouling paint that exhibits excellent antifouling power even during mooring periods. Prevents marine organisms from adhering to the shaft.
●Note: An electric disc sander is required for construction.
Paper discs #80 to 240, nylon discs, etc. can be used, expanding the scope of work.
[Coating amount] Approximately 0.3 square meters (approximately 25 cm diameter propeller)
【set content】
■Nuperacrine PLUS Primer: Main agent ×255g
■Nuperacrine PLUS Primer: Hardening agent x 45g
■Nuperacrine PLUS Primer: Adhesion enhancer ×15g
■Nuperakurin PLUS finish: 160g
■Brush: 2
【how to use】
1.Remove marine organisms and oil from the propeller.
2.Remove the old paint film and polish the propeller surface using an electric disc sander.
3. Wipe with thinner. (Sea Jet Thinner A, Sea Jet Thinner D, etc.)
4. Apply two coats of Nuperacrine PLUS Primer. (Please complete 2 coats within 90 minutes)
5.After the primer dries, apply Nuperacrine PLUS finish. (Recommended 2 coats or thicker coat)
6. After drying thoroughly, lower the rack. (Over 8 hours at a temperature of 20 degrees)
*For details, please refer to the installation instructions included with the product and the Chugoku Paint Co., Ltd. website.