Collection: UNLIMITED LIFE VEST

[Adaptation] MIUKNI Needle Screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

[Adaptation] KEIHIN needle screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Compatible] SEA-DOO X series sponson (S3 hull / GTI hull after 2011)

[Quantity] 10 pieces
[Material] Stainless steel
[Size] 3mm

Oval washer used for SEA-DOO X series sponsons.
Reinforces the genuine sponsons and is also used as an accent part of the sponsons.

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*The company's adjustable handle mount
[UL35003] For [UL35003-ULD] (UL35007 head plate only)

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For the company's UL35300 shockless handle mount

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI UNLITED head plate (model number: UL35007) only
(*Product used: UL35003-ULD)

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.
UNLIMITED Handle Mount ULTRA Low Down Mount Kit (UL35003-ULD)
This is a special kit for the head plate used.
■Material: Stainless steel

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

Bolt kit for UNLIMTIED handle mount system

[Kit contents]
●For hull installation M8×30: 4 pieces
- Countersunk head for base M6 x 25: 3 pieces
- Pan head M6 x 30 for heads: 3 pieces

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

Kawasaki 800SX-R

Compared to genuine products, they are lighter, stronger, and cheaper.
When worn, it creates a streamlined and lacy impression.

[Material] FRP
[Quantity] 2 pieces 1 set
[Installation] Bolt-on

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Compatible models]
KAWASAKI Kawasaki 750/800(A1)
800SX-R (2003) JS800A1,
750SXI (1995-97),
750SX-A1・JS750B1/B2/B3,
750SXI-PRO(1998-2002)JS750C1-5

●Also compatible with normal engines.
●Because it is a reinforced coil, it is tougher than normal, and the price is more reasonable than normal.
●Compatible with genuine product number 21003-3732.

[Compatible models] YAMAHA SJ (96-20)

By installing the handle pole spring with a spring that is approximately 70% stronger than the genuine one,
The weight of the handle pole is 40% lighter, reducing the burden.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

-Newly released deck mat for SEADOO from UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of the product material and color, certain colors (green, orange, red, pink, yellow) may
The color may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.