Collection: UNLIMITED LIFE VEST

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] YAMAHA Superjet (2021)

Made of aluminum billet

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Compatibility] Can be installed on runabout models [Type] Handle diameter 22.4mm standard [Included] Handlebar pad included (pad length: 220mm)

●Wide handlebars allow for natural and aggressive riding.

●The wide handle makes it easy to adjust (cut) the handle to your desired length.

●The racing handlebar is made from aircraft materials and coated with carbon fiber, giving it a spartan and stylish look.

●The angle and length are based on the conventional racing bar, but there is a printed scale that allows you to reliably set the mount position, making it convenient for setting.

●The straight type is the world's first innovative handlebar exclusively for watercraft, with no SWEEP handle squeezed at all. Used and recommended by top riders around the world. The feature is that when the center of gravity is low, there is no interference between the steering wheel and the flank when cornering, allowing you to maintain a more forward-leaning posture.

Compatible with PWC 3 manufacturers
SEADOO <2015 and later models> Excluding SPARK Kawasaki, YAMAHA

The float is located on the life vest side to prevent the weight of the cord from swinging around.
When new, it will continue to remain buoyant even if left in a tank filled with calm water for a week.

■Size: Total length approx. 40cm, when extended approx. 1m30cm

【please】
*Before use, please check the cord for cracks and the crimped parts at any time.
*SD key registration is required, so please check with the dealer you purchased the hull from.
*This product is not compatible with the SD SPARK series.

*For Kawasaki and YAMAHA models, please select UFL2101, which is compatible with two manufacturers.

If you are using it for guests, we recommend this model as it offers excellent value for money.
One size fits all, so you won't have to worry about choosing the size!
The Coast Guard life vest offers cost-effectiveness with its simple structure!
By eliminating the side panels and reducing the size of the back panel, the garment is lighter and the feeling of tightness is eliminated.

■US Coast Guard certified product (PWC limited JCI legal equipment compatible)
■ Suitable chest size: 80-120cm
■ Actual measurements when laid flat Chest/Waist/Total length: 86cm/88cm/42cm
*Please note that there may be some errors due to measurements taken by our staff.

Personal Watercraft PWC Jet Bike Kawasaki JETSKI SUP Paddle Board YAMAHA Marine Jet SEADOO Kayak Canoe Small Boat Special Life Jacket JCI Boat Inspection Banana Boat Life Vest Life Jacket Coast Guard Certified UNISEX Family Junior Women

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

★Limited quantity sale★

[Compatible models] KAWASAKI
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S) / 900STS / 800X-2
[Kit contents]
Mount head, mount base Fat bar (bar diameter: 28.6 mm) Clamp cap bolt (M8 x 30 x 30 mm)
Mounting post (70mm)

*For fat bars (28.6mm diameter) only.
*If you are using a 22.4mm handlebar, please prepare a bar spacer separately. (Part number: UL35002)*

◇◆ Limited edition steering mount kit using 70mm steering post. ◇◆
*The standard [UL35003] model is 80mm.

●You can choose the height and bar of your choice.
●The ultimate low-down handlebar mount! Successfully lowers the handlebars by 120mm from the stock mount.
●The handlebar height can be adjusted by replacing the optional post, making it compatible with many KAWASAKI models.
●By making the post base and clamp base components interchangeable, 18 different positions can be selected.

[Information]
This product is for STX series / 900STS / 800X-2, but by replacing it with the optional items below, it will also be compatible with the following variations!
●ULTRA series...Uses optional 160mm mounting post. The most low-down mount!
●For models (ULTRA250/260/260LX/LX) equipped with a handlebar mount cover (product number: UL048-C, UL35005)...please purchase the optional 230mm mount.

【correspondence】
Can be installed on runabout models
Compatible with 28.6mm handle clamp

【type】
Handle diameter: Clamp mounting part 28.6mm,
Grip/lever mounting part 22.4mm

●The clamp part is thick and flexible, making it a wide handle with excellent flexibility and strength.
●Wide handle has sufficient rigidity and is coated with carbon Kevlar.
★Also available in silver without carbon coating (UL049).
*A separate fat bar clamp (UL061 recommended) is required for installation.

The 1.5mm premium flexible airprene keeps you warm.
It also has excellent elasticity!
The thin wetsuit fabric has just the right amount of stretch to reduce muscle fatigue. Like wetsuits, it comes in a wide variety of sizes and is comfortable to wear, with an emphasis on fit. It can be worn as an undershirt for wetsuits, as an outer layer, or as an inner layer for board shorts.

This is the high-end model "Strike Plus" of the JETPILOT brand STRIKE.
This life jacket is JCI preliminary inspection approved and is suitable for inspection of small special vessels such as jet skis.
This is Jet-Pilot's classic front buckle series, which features four secure buckles for improved hold and comfort.

■Equipped with lanyard W/D ring and emergency whistle ■Durability impact test 100
■ Suitable chest size
S: 84-94cm
M: 94-104cm
L: 104-114cm
XL: 114-125cm

■US Coast Guard certified product (PWC limited JCI legal equipment compatible)
■D-ring and whistle included

Personal watercraft PWC Jet ski Kawasaki JETSKI SEADOO YAMAHA MARINEJET Marine jet Life jacket Small vessel special JCI inspection Japan Small Vessel Inspection Organization Ship inspection SUP Wakeboard Marine sports Wetsuit River play Sea bathing Life vest Life jacket

[Compatible models]
STX160 series
KAWASAKI ULTRA300/310 series, ULTRA LX ('12~)
ULTRA300X/ULTRA300LX
ULTRA LX('12～)
ULTRA310X / ULTRA310R / ULTRA310LX (-'21) / ULTRA310SE

*Cannot be used with ULTRA250/260.

[Material] Stainless steel polished

Luxurious stainless steel buff mirror finish!
By replacing it, you are sure to improve your visual appearance from the cheap genuine hook!

【accessories】
M8x30 cap bolt x 1
Spring washer x 1

[Compatible models] KAWASAKI ULTRA series
ULTRA310 (~'21)
ULTRA300X
ULTRA300LX
ULTRA LX ('12～)

*ULTRA250/260 is not compatible.

[Product Name] ULTRA310/300X Front Cowl FRONT COWL

■Black gel coat finish.

It is designed to be easily converted from normal food.
Since the normal inner is used as is, the normal storage box can also be used!
Compared to the normal hood (without innerwear) which weighs approximately 3.5kg, the weight can be reduced by approximately 20%.

※※This is an unpainted product, so please paint it in your favorite color before use. ※※

【Guidance】
*Made-to-order products (usually takes about 3 weeks) Please contact us for the approximate delivery date before placing your order.
*Please note that we cannot accept cancellations or returns.

[Compatible models] KAWASAKI 15F(-19)/12F(05-07)

Used when the mirror is removed.

●1 set left and right ●Material: Stainless steel ●Thickness: 1mm
●Accessories: Screws x 6

[Compatible models]
KAWASAKI ULTRA300, 310 (-'21) series (excluding 310R)
*For UNLIMITED adjustable mount [Product number: UL35003-DAJS, UL35003-AJS] only

[Information] Please use [Product number: UL36301] for 310R.

A plate to relocate the cruise control switch installed in the throttle lever case.
By using it when replacing the stock throttle lever with an aftermarket parts lever,
There is no need to remove the cruise control function.
■Material: Stainless steel (mirror finish)

A high-float recreational vest made from durable nylon.

■Chest size XS: 70-80cm
S/M: 80-100cm
L/XL: 100-120cm

■US Coast Guard certified product (PWC limited JCI legal equipment compatible)
■D-ring and whistle included

*Male model size: Height 182cm (wearing S/M size)
*Female model size: Height 170cm (wearing S/M size)

Personal Watercraft PWC Jet Ski Kawasaki JETSKI Jet Ski YAMAHA Marine Jet SEADOO Small Boat Special Life Jacket JCI Boat Inspection Life Vest Life Jacket Coast Guard Certified Men's Women's Junior UNISEX Unisex WATERTOY Banana Boat SUP

This special price is available only for the international men's XS size.

The three-buckle front-opening type allows you to easily fine-tune the size using the buckles.
The design is full of marine flair with its border pattern.
The unisex size makes it suitable for juniors, moms, and families.

■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)
■ Lifesaving whistle equipped
■MATERIAL / Nylon OX, PVC/PE foam

■ Suitable chest size XS: 76-84cm
[Disclaimer] Please note that we cannot accept returns or exchanges for special price items.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")
■Water and light resistance

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL56008SL Silver
UL56008BK Black
UL56008GR Green
UL56008BL Blue
UL56008OR Orange
UL56008RD Red

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

Billet oil cap is
Simply replace the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It installs in minutes and is a great-looking, practical upgrade.
You can easily dress up your engine room.

■With O-ring
■Made of durable 6061 billet

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.

[Support] M8 flat head screw

[Quantity] 1 piece
*Usually countersunk screws require counterbore processing on the mating material,
By using rosette washers, you can use countersunk screws without machining.

Be stylish with your favorite color! Also good as a design element!
You can also dress it up by replacing the bolts that secure the sponsons.

[Compatible models]
SEA-DOO 4-stroke ALL model (*excluding SPARK)

*Please use the genuine O-ring when using.

The oil cap can be removed without special tools when changing the oil.
It's very stylish and makes the engine room stand out.

UL53001SL Silver
UL53001OR Orange
UL53001RD Red
UL53001YL Yellow

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

[Compatible models] KAWASAKI Kawasaki
ULTRA300X / ULTRA300LX / ULTRA300SE
ULTRA310LX (-'21) / ULTRA310X / ULTRA310SE

Used to relocate the cruise control button when replacing the accelerator lever.
Available in 4 colors, you can color coordinate the throttle lever and hull.

When replacing the throttle lever
●When trying to use the cruise control function at the same time...
You must replace the stock steering mount with an aftermarket steering mount and use a relocation plate.

●By using this case together
[Using the cruise control function with the original steering mount] Furthermore
[Replacing the throttle lever without losing the position tilt function] is now possible.

[Compatible models] SEA-DOO iTC/iBR equipped model
Lever billet case for electronic throttle (iTC) and I-brake (iBR) systems

[UL36006] SEA-DOO mode select system case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Applicable models] SEA-DOO iTC/iBR equipped model Lever billet case for electronic throttle (iTC) and I brake (iBR) system

[UL36005] Case for SEA-DOO mode select system

Left side: Sports mode/Eco mode VTS button case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC equipped model Lever billet case for electronic throttle (iTC) system

[UL36004] Right side: Electronic throttle (iTC) lever case

Move the iTC and iBR sensors to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iBR equipped model
Lever billet case for I-brake (iBR) system

[UL36003] Left side: I brake (iBR) lever case

Move the iBR sensor to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

[Compatible models] KAWASAKI ULTRA series / YAMAHA GP1800
■Handlebar clamp: Compatible with standard handlebar diameter 22.2mm

●KAWASAKI ULTRA310X /310R /310LX (-'21) /310X SE /300X /300LX /260X /260LX /250X /LX
●YAMAHA GP1800 / VX series ('15-)

■Material: Made of billet aluminum

This adapter allows you to replace the handlebar while using the genuine handlebar mount.
To replace the handlebar of a model that uses a V-shaped handlebar mount,
It used to be necessary to replace the steering mount, but with this product, you can now replace the handlebar!

For the ULTRA series, we use the genuine OEM mount as is, so
The steering wheel tilt function can also be used as is.

SEA-DOO
Models equipped with electronic throttle (iTC) and I-brake (IBR) systems from 2009 onwards

[There may be additional parts required depending on the compatibility details and model. Please check the product description]

[Compatibility details]
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[About required parts]
*S3 Hull...The angle adjustment range of the normal steering wheel tilt function is limited.
*T3 Hull, RXP-X260/300, 2015 and later models...Top plate [UL35100TP-2] sold separately is required.
*SPARK…Removal of stainless steel DESS post holder plate requires SPARK dedicated top plate [UL35100TP-SP] sold separately.

New design and low price!
10cm lower than the normal position, allowing riding in a low position.
An offset handlebar clamp [UL062] is installed.
Other handlebar clamps from the same company can be attached.
*Depending on the model, the hull and handle may interfere.

【Guidance】
●Recommended for use with the company's billet switch case set [UL36000] and ITC/IBR billet lever [UL33002] ●It is also possible to process and use the X series genuine switch case.
●The handlebar of the SEA-DOO model is now replaceable.