Collection: UNLIMITED LIFE VEST

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Compatible models]
KAWASAKI Kawasaki 4st ALL
Compatible plug cord: Φ7~9mm

*Delivery time is approximately 2 weeks after ordering.
[Kit contents]
- 4 types of conductive spiral tubes (approximately 340, 500, 600, 700mm),
-Earth cord 180mm x 4,
●Cord clamp x 4,
-Screw M4-12, nut M4, spacer x 4 each
- Cable ties x 8

Conductive spiral tube with special plating.
By installing it, the spark plug voltage of CDI ignition model will increase by about 20%!
It is possible to boost the discharge voltage of the spark plug by wrapping it around the plug cord and grounding it.

When the engine is running, the plug cord constantly generates noise as a reaction to the flow of electricity.
By organizing the noise (magnetic field), the reaction is reduced and a more powerful spark is created.
It brings absolute effects to everything from normal engines to racing engines.

[Compatible models] KAWASAKI 750/800

[Kit contents]
★Digital CDI power unit (product number: UL21001)
★Lightweight duralumin flywheel (product number: JL-K8P-F)

Digital CDI-R power unit and flywheel kit

Suitable for a wide range of users, including Sunday users, race users, and freestyle users. The engine speeds up smoothly from low rotation to high rotation.
The 800g lightweight flywheel promises quick response and can be expected to increase the high rotation range.

Digitally controls ignition timing using a high-performance 8-bit microcontroller
Built-in different ignition timings for MAP1 to 4. It can be changed with a switch.
Since this is a race-specific model, the limiter has been cut.
It has a compact design that fits neatly into an electrical box, and has unparalleled high durability.
In order to cope with the high engine speed due to the use of a lightweight flywheel, the line has been strengthened to ensure that the input signal from the pickup coil is received.
An ignition map that increases torque characteristics at high rpm to avoid torque loss in the high rpm range when using a lightweight flywheel.

■CDI: Made in Japan

[Applicable models] SEA-DOO T3, S3, GTI hull
*For RULE bilge pump only

[Accessories] 4 rivets

[01689] 500 [97033] 800 [01608] 1100 This is a stay when installing the bilge pump.
A bilge pump can be installed.
Bilge pump holder [12-1116] can be installed.

[Compatible models] YAMAHA 700SJ ('96~)
*For RULE bilge pump only

[Accessories] 8 rivets

[01689]:500[97033]:800[01608]1100 Stay when installing bilge pump.
Two bilge pumps can be installed.
Bilge pump holder [12-1116] can be installed in 45 degree increments.

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] KAWASAKI 750 / 800SX-R / 800X-2

Unique angle (3.2 degrees) increases intake efficiency,
The one-piece structure also enhances the sense of unity between the carburetor and intake manifold.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

■Quantity: 1 piece
■Size: 8×35mm

Used when linking MIKUNI carburetor.
Compared to other linkages, it has less trouble and is more durable.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Compatible models] Kawasaki Kawasaki
ULTRA250X('08-)
ULTRA260X/260LX
ULTRA300X / 300LX(※)
(*) When installing the ULTRA300 series... 1 silicone coupler [Product number: UL14105] is required separately.

By replacing the back of the water box outlet with aluminum, ventilation efficiency will be increased.
Radiant heat from the exhaust pipe is reduced, contributing to weight reduction, and the billet exhaust end creates a stylish rear view of the hull. The joint uses silicone hose [UL14101], which has high heat resistance, pressure resistance, ozone resistance, and resistance to deterioration.
Also, if you use the T-bolt clamp [JL0288/JL0250] together, you won't have to worry about it coming off.

[About installation] No processing required, bolt-on OK
(Bolts are not included, so please use genuine ones.)

【set content】
- End pipe x 1,
-Joint pipe x 1,
●Joint hose Φ70×70mm×1,
●Silicone hose variant Φ50-Φ70×100mm×1,
●Hose band x 2

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

■Compatible models
KAWASAKI 750SX/800SX-R/800X-2

■Accessories: Key, Woodruff

A lightweight flywheel weighing 800g.
Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.
This product is not subject to complaints as it is a competition part.

KAWASAKI
750SX
800SX-R
800X-2

●Lightweight flywheel weighing 800g.
●The response of engine revving and rotation return is improved, so acceleration from 0 to 1m is significantly improved, making it a must-have item at the start of a racing scene.
●Improved from previous products to increase durability.
●Compatible with CDI-10R/CDI-R power unit, and when installed at the same time, the pickup will be improved and the response will be linear with throttle work. The strength of the gear has also been increased.
●Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.

[Compatible models] KAWASAKI STX-R / Ultra150
[Specifications] Compatible with regular gasoline

This is a purely domestic CDI unit, and we have researched the engine characteristics of STX-R/Ultra150 to achieve the best ignition characteristics.
Easy to install and shortens the time to reach top speed from low speed.

[About installation]
Bolt on.
*Please set according to the engine specifications and driving conditions.

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

[Applicable models] KAWASAKI 4-stroke ALL
STX-12F /STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp kit LED STOP LUMP KIT

[Kit contents]
-LED stop lamp unit x 1,
●Flexible LED lamp x 1,
●Mounting screws x 2

First PWC! This is a brake stop lamp kit exclusively for the KAWASAKI ULTRA series.
It reads the engine speed and turns off when the accelerator is on, and the LED lamp lights up when the accelerator is off.
Since it is always on while idling, you can notify people around you of your boat's presence even from a distance.
The stop lamp included in the kit uses high-brightness LED and boasts high visibility.
The flexible light lens body can be installed anywhere, making it ideal for PWCs with many curved surfaces.
It is also waterproof and durable.

This allows the following boat to slow down when touring etc.
It can be notified quickly and can be expected to be effective in preventing rear-end collisions.

[About installation]
Since it is a coupler on coupler, no special wiring processing is required.
(Lamp and unit connection processing/LED flex lamp installation only)
Attach with double-sided tape on the back of the lamp body.

【Product details】
Unit dimensions: 70×40×35mm
Cord length: Unit power line 300mm
Rotation signal line 1,400mm
Lamp connection wire 2,000mm
Power consumption: 12V 4A
Light dimensions: 110×30×10mm
Cord length: 800m

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

KAWASAKI 4-stroke ALL
STX-12F
STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp LED STOP LUMP

[Product contents]
●Lamp body
●Connection terminal
●Mounting screw

【Product details】
Light dimensions: 110×30×10mm
Screw hole: 6.5mm
Cord length: 800m

A highly water resistant and durable LED lamp with a flexible lens body.
The compact body allows installation anywhere, and it is very easy to install on curved surfaces using strong adhesive tape.
By lighting up the LED lamp, when touring, etc., you can quickly notify following boats of a slowdown, and can be expected to be effective in preventing rear-end collisions.
You can also notify people around you of your boat's presence from a distance.
Adopts high-brightness LED and boasts high visibility.
A flexible light lens body that can be installed anywhere is ideal for PWC.

[Regarding installation] Please install using the double-sided tape on the back of the lamp body.

[Information] If you are looking for a lamp unit, please use [Product number: JL23011].

[Compatible models] KAWASAKI
SX-R1500 NEW SX-R
800SX-R
SXi-Pro/SXI/SX

handle pole spring
By attaching it with a spring that is approximately 70% stronger than the original, the handle pole weight is reduced by 60%, reducing the burden.
This is an essential item when using the genuine handle pole.

UNLIMITED original crew neck sweatshirt using dry air fabric

Made of thick dry air fabric with a multi-layer structure similar to cardboard.
It contains plenty of air layers, so it's light enough for its thickness and has excellent heat retention.
Air can be stored between the fabric, and this air layer reduces the influence of outside air, so it has excellent heat retention.
It has a glossier feel and is thicker than regular sweat fabric.
Another popular feature is that it is soft, stretchy, and wrinkle-resistant.
The main point is the black 3D brand logo, which is subtle yet stands out.

The pocket follows the cutting pattern,
They are installed on both sides, giving a clear overall impression.

■Fabric: 20% viscose, 73% polyester, 7% spandex ■Both side pockets available

■Product actual size (cm)
*Please note that measurements are taken horizontally by our staff.
*Due to the characteristics of stretchy fabric, there may be an error of plus or minus 1cm.

A. Shoulder Width - Measured in a straight line when laid flat
B. Neck circumference - Measure the outer circumference of the collar when the neck is laid flat.
C. Waist circumference - Measure the width of the thickest part of the torso in a straight line when it is laid flat and double it.
D. Length - Measured in a straight line from the neck of the back to the hem.

S: A.49 /B.44 /C.100 /D.67
M: A.52 /B.46 /C.105 /D.68
L: A.55 /B.48 /C.110 /D.69
XL: A.58 /B.50 /C.117 /D.71

Based on the impressions of our professional riders, we thoroughly analyzed the rider's movements and repeatedly tested the optimal cut pattern. This is the ideal wetsuit that effectively uses highly elastic materials. You will surely be able to experience the highest quality and high potential of UNLIMITED.
The side cuts give the body shape a clean look and also have an excellent design.

-UNLIMITED RUSH-
Aiming for higher performance, the design is focused on specifications that maximize the power, speed, and stability of PWCs, under the supervision of UNLIMITED's exclusive professional riders. The ultimate wear that allows riders to embody a smart look that is in line with the times.

【Features】
・Shoulder Velcro: The Velcro on the left shoulder of the long john allows for smooth putting on and taking off. ・Stabilizing pad: The pad on the knee area helps improve grip while riding. ・2.5mm flex neoprene: The new material is an evolution of the conventional fabric and has the highest level of texture and elasticity.
- Ink pad: Flexible and lightweight, with improved grip - Ankle zipper: Velcro tape with zipper for easy on and off to protect the slider

[Freely mix and match] Separately sold set-up product: EXPEDITION COAT - Marine coat - (product number UWC2240BK)
・RUSH WET JACKET (product number UWA2230BK)
・RUSH WET PANTS (Product number UWP2220)
Can be worn in combination with the above items.

[Compatible models] SEADOO
GTX-LTD / GTX (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] SEADOO RXT-X / Wako Pro (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki ULTRA 310LX-S (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA 310LX (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA LX series (2009-2021)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

A cap with a large "LOOK FAST and GO FAST" logo.

■The front panel of the hat features a custom embroidered logo.
The thick embroidery gives it an outstanding sense of luxury. The back style has gold brand embroidery.
■The wide and straight brim type, which is widely popular in street style, is extremely fashionable.
The arched brim blocks more sunlight from hitting your face, but it also reduces your visibility.
The UNLIMITED cap has a wide brim that blocks sunlight while ensuring visibility.
■One size fits all The size can be adjusted with a snapback closure (adjuster) at the rear.
■The inside of the brim is colored red to emphasize the design.

■For everyday wear such as sweatshirts, printed T-shirts and board shorts,
Add a cap for a street look...a popular casual style.

■Can be worn backwards with a collared shirt or polo
The UNLIMITED cap also has a logo on the back style, giving it a shrewd look.