Collection: PWC Parts & Supplies

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatibility] For SEA-DOO(08-09) RXP-X / RXT-X

[1] SE-027018 STD standard handlebar (Φ22.4)
[2] SE-027018F FAT fat handlebar (Φ28.6)

steering system.

●This is a steering mount system designed with an image that emphasizes the letter X.
●Compared to other companies' products, the strength of the front cowl mounting stay is increased by billet and welding.
●Also, the surface is buffed and anodized to give you a high-dimensional stylish look.

[Compatible with] SEA-DOO (04-) 4TEC

[1] SE-027016 STD standard handlebar (Φ22.4)
[2] SE-027016F FAT fat handlebar (Φ28.6)

It's a steering system
A cool design with a 4TEC image.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHT08: Outer diameter 8× 8× 8mm/Inner diameter 5× 5× 5mm
NHT10: Outer diameter 10 x 10 x 10 mm / Inner diameter 7 x 7 x 7 mm
NHT12: Outer diameter 12×12×12mm/Inner diameter 10×10×10mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRT1008: Outer diameter 8×10×10mm/Inner diameter 5×7×7mm
NHRT1210: Outer diameter 10 x 12 x 12 mm / Inner diameter 7 x 8 x 8 mm
NHRT1412: Outer diameter 12 x 14 x 14 mm / Inner diameter 8 x 10 x 10 mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRE0806: Outer diameter 6 x 8mm/Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm/Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm/Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14 mm / Inner diameter 8 x 10 mm

[Nekopos shipping products]
*Credit card payment or advance transfer only *Date and time cannot be specified *For cash on delivery, shipping fee is 800 yen/Hokkaido/Okinawa 1,500 yen (excluding tax)
*Other products ordered at the same time are not eligible for free shipping.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRC0806: Outer diameter 6×8mm/Inner diameter 4×5mm
NHRC1008: Outer diameter 8×10mm/Inner diameter 5×7mm
NHRC1210: Outer diameter 10 x 12 mm / Inner diameter 7 x 8 mm
NHRC1412: Outer diameter 12 x 14mm/Inner diameter 8 x 10mm

Tether for YAMAHA

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

T type
It is made of aluminum and has a plated finish, giving a stylish look to the water area.
The pipe body is also very compact.

■Number: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: different diameter (outer diameter 9.5mm/6.3mm, inner diameter 7.7mm/5mm)
3/8 x 3/8 x 3/8: Same diameter (outer diameter 9.5 mm, inner diameter 7.7 mm)

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

color plug cap
●Quantity: 1 piece

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-7110 110
006-7115 115
006-7120 120
006-7125 125
006-7128 128
006-7130 130
006-7132 132
006-7135 135
006-7138 138
006-7140 140
006-7142 142
006-7145 145
006-7148 148
006-7150 150
006-7152 152
006-7155 155
006-7158 158
006-7160 160
006-7162 162
006-7165 165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fitting used when removing the carburetor choke shaft

[For KEIHIN]
006-538 Primer inlet
006-539 Blind Cap

This is a cap that is attached when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

[Applicable] MIKUNI SBN carburetor
006-438 For SBN38mm
006-444 For SBN44mm
006-446 For SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetor.
●KIT contents: Shaft, butterfly, E-clip, seal, bushing, nylon washer

Cheaper than genuine parts! !

sea ​​doo shaft carbon ring
[003-110-01] For drive shaft 22mm shaft
●Genuine product number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., SC, Wake

-------------
[003-110-02] For drive shaft 27mm shaft
●Genuine product number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

■Medium type
■With 3/4 flange
■Size: Total length 130mm x outer diameter 30mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

●Grip that does not require bonding and is very popular in America.
●It is a type that does not use adhesive for installation and is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

●Main jet for CV cab and CDCV cab.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

【correspondence】
KAWASAKI

It is very convenient because it floats even if dropped in water.
Please use according to your wrist size.

[Float color] x [Lanyard color]
A2126 Black x Silver
A2148 Red x Black
A2151 Blue x Silver
A2149 Green x Black

【correspondence】
KAWASAKI

This is a Velcro type wristband lanyard.
The tether cord has a whistle attached.

[Band color] x [Lanyard color]
A2109PFW Black x Black
A2103PFW Black x Red
A2107PFW Black x Blue
A2101PFW Black x Green

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL56008SL Silver
UL56008BK Black
UL56008GR Green
UL56008BL Blue
UL56008OR Orange
UL56008RD Red

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

Billet oil cap is
Simply replace the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It installs in minutes and is a great-looking, practical upgrade.
You can easily dress up your engine room.

■With O-ring
■Made of durable 6061 billet

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.